Directorio
FRANCISCO ANTONIO PERDIGONES SANCHEZ
Categoría
Profesor Titular de Universidad
Contacto
Correo electrónico
Departamento
Área
Tecnología Electrónica
Docencia
Investigación
Grupo de investigación
TECNOLOGIA ELECTRONICA (GTE)
Proyectos y contratos de investigación
MEMSFAB2 (SN-0668/2008 - Investigador/a)
MEZCLADO ULTRAFINO DE FASES INMISCIBLES Y ATOMIZACIÓN TURBULENTA: MODELIZACIÓN Y GENERACIÓN DE POBLACIONES SUBMICROMÉTRICAS Y NANOMÉTRICAS (P08-TEP-4128 - Investigador/a)
SENSOR SOLAR ALTAMENTE INTEGRADO PARA EL CONTROL DE ACTITUD DE SATÉLITES (P08-TIC-3590 - Investigador/a)
BIOINGENIERÍA AL SERVICIO DE LA SOCIEDAD. SINBAD (SN-0388/2008 - Investigador/a)
INTERACCION ELECTRO-NEURONAL INTELIGENTE EN UN SISTEMA DE CULTIVO DE LARGA DURACION (PID2021-127653NB-C22 - Investigador/a)
Incentivo al Grupo de Investigación TIC-109 (2017/TIC-109 - Investigador/a)
Incentivo al Grupo de Investigación TIC-109 (2011/TIC-109 - Investigador/a)
Incentivo al Grupo de Investigación TIC-109 (2010/TIC-109 - Investigador/a)
Ayuda a la Consolidación del Grupo de Investigación TIC-109 (2009/TIC-109 - Investigador/a)
Ayuda a la Consolidación del Grupo de Investigación TIC-109 (2008/TIC-109 - Investigador/a)
Ayuda a la Consolidación del Grupo de Investigación TIC-109 (2007/TIC-109 - Investigador/a)
Desarrollo e implementación de una herramienta basada en machine learning para el control y autenticidad "in situ" de vinagres de alta calidad: Experi (AT21_00018 - Investigador/a)
Diseño, fabricación y validación de un test rápido basado en Lab-on-Chip con PCR y detección por fluorescencia de carga vírica SARS-CoV-2 (COVIDETECT) ( CV20-98629 - Investigador/a)
Sistema para la amplificación y detección de fragmentos de ADN empleando PCR en Lab-on-chip (PCR-on-a-Chip) (P18-RT-1745 - Investigador Principal Consolidado)
Integración de Opto-Electroestimulación y Procesamiento de Señales para el Estudio in-Vitro de Larga Duración del Comportamiento Neuronal (RTI2018-100773-B-C - Investigador/a)
Lab-on-chip de electro-estimulación, para el estudio In-vitro de Cultivos de retina de Larga duración: Retina-on-a-chip (US-1265983 - Investigador/a)
Bioingeniería al servicio de la Sociedad (SINBAD - Investigador/a)
Desarrollo y validación de una plataforma Lab-on_chip para aplicaciones biomédicas sobre sustrato PCB (Lab-on-PCB) (TEC2014-54449-C3-2-R - Investigador/a)
Desarrollo e integración de microsistemas (MEMS) microfluidicos para producción de micro- y nano- partículas simples y complejas usando flow focusing (DPI2004-07197 - Investigador/a)
Novel Flow Focusing technology to produce microencapsulated probiotic bacteria for the food sector (FLOCAP) (COOP-CT-2004-513144 - Investigador/a)
Estudio y desarrollo de aplicaciones, métodos, física y diseño de dispositivos para la generación de chorros capilares y producción de partículas, aer (DPI2007-63559 - Investigador/a)
SIGMAPLANTAS: La innovación en las plantas y modelos de sistemas de concentración fotovoltaica en España (IPT-2011-1468-920000 - Investigador/a)
Desarrollo y Validación de una Plataforma Lab-on-Chip para Aplicaciones Biomédicas sobre Sustrato Pcb (Lab-on-Pcb) (TEC2014-54449-C3-2-R - Investigador/a)
Desarrollo y Validación de una Plataforma Lab-on-Chip para Aplicaciones Biomédicas sobre Sustrato Pcb (Lab-on-Pcb) (TEC2014-54449-C3-2-R - Investigador/a)
Microlab-en-Chip para Producción de Radiofármacos para Diagnóstico PET (P12-TIC-2296 - Investigador/a)
Integración de Sensores Inteligentes en Lab-on-Chip para Aplicaciones Biomédicas (TEC2011-29045-C04-02 - Investigador/a)
SIGMAPLANTAS: La innovación en las plantas y modelos de sistemas de concentración fotovoltaica en España (IPT-2011-1468-920000 - Investigador/a)
Desarrollo de un Star Tracker con Componentes Cots para el Control de Actitud de Picosatélites (P11-TIC-7351 - Investigador/a)
Desarrollo de un Star Tracker con Componentes Cots para el Control de Actitud de Picosatélites (P11-TIC-7351 - Investigador/a)
Microlab-en-Chip para Producción de Radiofármacos para Diagnóstico PET (P12-TIC-2296 - Investigador/a)
Integración de Sensores Inteligentes en Lab-on-Chip para Aplicaciones Biomédicas (TEC2011-29045-C04-02 - Investigador/a)
Desarrollo e integración de microsistemas (MEMS) microfluídicos para producción de micro- y nano- partículas simples y complejas usando flow focusing (DPI2004-07197 - Investigador/a)
ESTUDIO Y DESARROLLO DE APLICACIONES, MÉTODOS, FÍSICA Y DISEÑO DE DISPOSITIVOS PARA LA GENERACIÓN DE CHORROS CAPILARES Y PRODUCCIÓN DE PARTÍCULAS, AER (DPI2007-63559 - Investigador/a)
Libros publicados
Perdigones-Sanchez, Francisco Antonio:
Lab-on-PCB Devices. Mdpi. 2022. 978-3-0365-4701-5
Lab-on-PCB Devices. Mdpi. 2022. 978-3-0365-4701-5
Capítulos en Libros
Quero, José M.;Perdigones-Sanchez, Francisco Antonio;Aracil-Fernandez, Carmen:
Microfabrication technologies used for creating smart devices for industrial applications. Pág. 291-311. Woodhead Publishing. Woodhead Publishing. 2018.
Microfabrication technologies used for creating smart devices for industrial applications. Pág. 291-311. Woodhead Publishing. Woodhead Publishing. 2018.
Barrero, F.;García, A;Toral-Marin, Sergio;Perales, Manuel;Perdigones-Sanchez, Francisco Antonio;Quero-Reboul, Jose Manuel;Garcia, Jose;Perez, F;Rodriguez, Antonio;Delgado, F:
Desarrollo de nueva metodología docente para una asignatura truncal de Electrónica en el Nuevo Grado de Ingeniería de Tecnologías Industriales. Pág. 85-95. Universidad de Sevilla. Instituto de Ciencias de la Educación. Universidad de Sevilla. Instituto de Ciencias de la Educación. 2015.
Desarrollo de nueva metodología docente para una asignatura truncal de Electrónica en el Nuevo Grado de Ingeniería de Tecnologías Industriales. Pág. 85-95. Universidad de Sevilla. Instituto de Ciencias de la Educación. Universidad de Sevilla. Instituto de Ciencias de la Educación. 2015.
Quero-Reboul, Jose Manuel;Perdigones-Sanchez, Francisco Antonio;Aracil-Fernandez, Carmen:
Microfabrication Technologies Used for Creating Smart Devices for Industrial Applications. Pág. 281-304. Woodhead Publishing Limited. Woodhead Publishing Limited. 2014.
Microfabrication Technologies Used for Creating Smart Devices for Industrial Applications. Pág. 281-304. Woodhead Publishing Limited. Woodhead Publishing Limited. 2014.
Perdigones-Sanchez, Francisco Antonio;Moreno-Lopez, Jose Miguel;Luque-Estepa, Antonio;Aracil-Fernandez, Carmen;Quero-Reboul, Jose Manuel:
MICROSYSTEM TECHNOLOGIES FOR BIOMEDICAL APPLICATIONS. Pág. 45-68. INTECH - OPEN ACCESS PUBLISHER. INTECH - OPEN ACCESS PUBLISHER. 2010.
MICROSYSTEM TECHNOLOGIES FOR BIOMEDICAL APPLICATIONS. Pág. 45-68. INTECH - OPEN ACCESS PUBLISHER. INTECH - OPEN ACCESS PUBLISHER. 2010.
Asistencia a congresos
Perales-Esteve, Manuel Angel;Perdigones-Sanchez, Francisco Antonio;Barrero-Garcia, Federico José:
Diez años de experiencia PBL en Electrónica General. Comunicación en congreso. XV Congreso Tecnología Aprendizaje y Enseñanza de la Electrónica. Escuela Universitaria Politécnica de Teruel (Universidad de Zaragoza), Teruel, Spain. 2022
Diez años de experiencia PBL en Electrónica General. Comunicación en congreso. XV Congreso Tecnología Aprendizaje y Enseñanza de la Electrónica. Escuela Universitaria Politécnica de Teruel (Universidad de Zaragoza), Teruel, Spain. 2022
Aracil-Fernandez, Carmen;Urbano-Gámez, Jesús David;Perdigones-Sanchez, Francisco Antonio;Martín-fontanilla, José Antonio;Quero, José M.:
Towards a 3D-Printed and Autonomous Culture Platform Integrated with Commercial Microelectrode Arrays. Poster en Congreso. 13th Spanish Conference on Electron Devices . Seville. 2021
Towards a 3D-Printed and Autonomous Culture Platform Integrated with Commercial Microelectrode Arrays. Poster en Congreso. 13th Spanish Conference on Electron Devices . Seville. 2021
Perdigones-Sanchez, Francisco Antonio;Cabello, Miguel;Quero, José M.:
Thermocycler on printed circuit board for Lab on PCB applications. Ponencia en Congreso. XVI Workshop en Microsistemas y Nanotecnología. San Sebastián. 2019
Thermocycler on printed circuit board for Lab on PCB applications. Ponencia en Congreso. XVI Workshop en Microsistemas y Nanotecnología. San Sebastián. 2019
Perdigones-Sanchez, Francisco Antonio;Cabello, Miguel;Quero, José M.:
Thermal design of LoC-on-PCB. Ponencia en Congreso. 45th International Conference on Micro and Nano Engineering. RODHES, GREECE. 2019
Thermal design of LoC-on-PCB. Ponencia en Congreso. 45th International Conference on Micro and Nano Engineering. RODHES, GREECE. 2019
Kouvara, Dimitra;Kaprou, Georgia ;Perdigones-Sanchez, Francisco Antonio;Quero, José M.;Kokkoris, George;Tserepi, Angeliki:
Impulsion system for DNA amplification microdevice integrated on PCB. Ponencia en Congreso. 45th International Conference on Micro and Nano Engineering. RODHES, GREECE. 2019
Impulsion system for DNA amplification microdevice integrated on PCB. Ponencia en Congreso. 45th International Conference on Micro and Nano Engineering. RODHES, GREECE. 2019
Cabello, Miguel;Aracil-Fernandez, Carmen;Perdigones-Sanchez, Francisco Antonio;Quero, José M.;Rocha, Paulo:
Lab-on-PCB: Low Cost 3D Microelectrode Array Device for Extracellular Recordings. Ponencia en Congreso. 2018 Spanish Conference on Electron Devices. Salamanca. 2018
Lab-on-PCB: Low Cost 3D Microelectrode Array Device for Extracellular Recordings. Ponencia en Congreso. 2018 Spanish Conference on Electron Devices. Salamanca. 2018
Cabello -valverde, Miguel;Aracil-Fernandez, Carmen;Perdigones-Sanchez, Francisco Antonio;Quero, José M.:
Fabrication and characterization of a 3D MEA on PCB substrate. Comparison of the impedance of the 3D MEA with a wire bonding MEA culture device. Ponencia en Congreso. 12th Spanish Conference on Electron Devices. Salamanca. 2018
Fabrication and characterization of a 3D MEA on PCB substrate. Comparison of the impedance of the 3D MEA with a wire bonding MEA culture device. Ponencia en Congreso. 12th Spanish Conference on Electron Devices. Salamanca. 2018
Quero, José M.;Perdigones-Sanchez, Francisco Antonio;Blanco, Daniel:
Desarrollo de un dispositivo Lab-on-a-chip sobre sustrato Printed Circuit Board para la determinación del contenido de gluten en productos de consumo . Ponencia en Congreso. I CONGRESO DE MEDICINA Y CIENCIAS BIOMÉDICAS. FACULTAD DE MEDICINA DE LA UNIVERSIDAD DE SEVILLA. 2017
Desarrollo de un dispositivo Lab-on-a-chip sobre sustrato Printed Circuit Board para la determinación del contenido de gluten en productos de consumo . Ponencia en Congreso. I CONGRESO DE MEDICINA Y CIENCIAS BIOMÉDICAS. FACULTAD DE MEDICINA DE LA UNIVERSIDAD DE SEVILLA. 2017
Cabello, Miguel;Aracil-Fernandez, Carmen;Perdigones-Sanchez, Francisco Antonio;Quero-Reboul, Jose Manuel:
Conditioning lab on PCB to control temperature and mix fluids at the microscale for biomedical applications. Ponencia en Congreso. 2017 Spanish Conference on Electron Devices . Barcelona. 2017
Conditioning lab on PCB to control temperature and mix fluids at the microscale for biomedical applications. Ponencia en Congreso. 2017 Spanish Conference on Electron Devices . Barcelona. 2017
Franco, Emilio;Perdigones-Sanchez, Francisco Antonio;Luque-Estepa, Antonio;Quero-Reboul, Jose Manuel:
Dynamic Study of the Gate of an n-MOS Microfluidic Transistor for Computational Microfluidics. Poster en Congreso. 2017 Spanish Conference on Electron Devices . Barcelona. 2017
Dynamic Study of the Gate of an n-MOS Microfluidic Transistor for Computational Microfluidics. Poster en Congreso. 2017 Spanish Conference on Electron Devices . Barcelona. 2017
Flores, Guadalupe;Perdigones-Sanchez, Francisco Antonio;Aracil-Fernandez, Carmen;Cabello, Miguel;Quero-Reboul, Jose Manuel:
Microfluidic platform with absorbance sensor for glucose detection. Ponencia en Congreso. SPANISH CONFERENCE ON ELECTRON DEVICES (CDE) 2015. Aranjuez, Spain. 2015
Microfluidic platform with absorbance sensor for glucose detection. Ponencia en Congreso. SPANISH CONFERENCE ON ELECTRON DEVICES (CDE) 2015. Aranjuez, Spain. 2015
Salvador, Blas;Cabello, Miguel;Perdigones-Sanchez, Francisco Antonio;Flores, Guadalupe;Aracil-Fernandez, Carmen;Luque-Estepa, Antonio;Garcia-Ortega, Juan De La Cruz;Quero, José M.:
Microsystems Group Dept. Electronic Engineering University of Seville, Spain. Poster en Congreso. VII Jornadas Hispano - Francesas (IBERNAM-CMC2) on Microsystems and Nanotechnology. BILBAO. 2014
Microsystems Group Dept. Electronic Engineering University of Seville, Spain. Poster en Congreso. VII Jornadas Hispano - Francesas (IBERNAM-CMC2) on Microsystems and Nanotechnology. BILBAO. 2014
Perdigones-Sanchez, Francisco Antonio;Luque-Estepa, Antonio;Aracil-Fernandez, Carmen;Quero-Reboul, Jose Manuel:
Microfluidic circuit for flow rate auto-regulation. Ponencia en Congreso. Industrial Electronics Society, IECON 2014 - 40th Annual Conference of the IEEE. Dallas, USA. 2014
Microfluidic circuit for flow rate auto-regulation. Ponencia en Congreso. Industrial Electronics Society, IECON 2014 - 40th Annual Conference of the IEEE. Dallas, USA. 2014
Gassmann, Stefan;Luque-Estepa, Antonio;Perdigones-Sanchez, Francisco Antonio;Quero-Reboul, Jose Manuel:
Sensor structures generated with combination of SU8 and PCBMEMS. Ponencia en Congreso. IECON 2013. AUSTRIA, VIENA. 2013
Sensor structures generated with combination of SU8 and PCBMEMS. Ponencia en Congreso. IECON 2013. AUSTRIA, VIENA. 2013
Aracil-Fernandez, Carmen;Perdigones-Sanchez, Francisco Antonio;Luque-Estepa, Antonio;Quero-Reboul, Jose Manuel:
Microfluidic impulsion system manufactured by PCB-MEMS for Lab on a Chip . Ponencia en Congreso. 9th Spanish Conference on Electron Devices, CDE 2013. Valladolid. 2013
Microfluidic impulsion system manufactured by PCB-MEMS for Lab on a Chip . Ponencia en Congreso. 9th Spanish Conference on Electron Devices, CDE 2013. Valladolid. 2013
Luque-Estepa, Antonio;Quero, José M.;Perdigones-Sanchez, Francisco Antonio;Aracil-Fernandez, Carmen:
Electroosmotic impulsion device for integration in PCB-MEMS. Ponencia en Congreso. 9th Spanish Conference on Electron Devices, CDE 2013. Valladolid. 2013
Electroosmotic impulsion device for integration in PCB-MEMS. Ponencia en Congreso. 9th Spanish Conference on Electron Devices, CDE 2013. Valladolid. 2013
Flores, Guadalupe;Perdigones-Sanchez, Francisco Antonio;Quero-Reboul, Jose Manuel:
Pressurized microvalve with SMD-based activation to drive fluid in low-cost and autonomous MEMS. Ponencia en Congreso. 9th Spanish Conference on Electron Devices, CDE 2013. Valladolid. 2013
Pressurized microvalve with SMD-based activation to drive fluid in low-cost and autonomous MEMS. Ponencia en Congreso. 9th Spanish Conference on Electron Devices, CDE 2013. Valladolid. 2013
Quero, José M.;Perdigones-Sanchez, Francisco Antonio;Delgado-Seseña, Francisco Jose;Flores, Guadalupe;Luque-Estepa, Antonio;Aracil-Fernandez, Carmen;García, J. :
Microsystems Group. Ponencia en Congreso. 6ras Jornadas franco-españolas CMC2 ¿ IBERNAM. Marsella (Francia). 2012
Microsystems Group. Ponencia en Congreso. 6ras Jornadas franco-españolas CMC2 ¿ IBERNAM. Marsella (Francia). 2012
Quero, José M.;Perdigones-Sanchez, Francisco Antonio;Flores, Guadalupe:
Working principle of a Pressurized Microvalve with a Compensation temperature SMD resistor for Lab on a Chip. Ponencia en Congreso. 6ras Jornadas franco-españolas CMC2 ¿ IBERNAM. Marsella (Francia). 2012
Working principle of a Pressurized Microvalve with a Compensation temperature SMD resistor for Lab on a Chip. Ponencia en Congreso. 6ras Jornadas franco-españolas CMC2 ¿ IBERNAM. Marsella (Francia). 2012
Gassmann, Stefan;Pagel, Lienhard;Luque-Estepa, Antonio;Perdigones-Sanchez, Francisco Antonio;Aracil-Fernandez, Carmen:
Fabrication of electroosmotic micropump using PCB and SU-8. Ponencia en Congreso. 38th Annual Conference of the IEEE Industrial Electronics Society. MONTREAL (CANADA). 2012
Fabrication of electroosmotic micropump using PCB and SU-8. Ponencia en Congreso. 38th Annual Conference of the IEEE Industrial Electronics Society. MONTREAL (CANADA). 2012
Quero, José M.;Luque-Estepa, Antonio;Perdigones-Sanchez, Francisco Antonio;Medina, Diego ;Garcia, Juan :
3D laser micromachining of a transferred SU-8 membrane. Ponencia en Congreso. 11th Int. Conf. on Laser Ablation. Playa del Carmen (México). 2011
3D laser micromachining of a transferred SU-8 membrane. Ponencia en Congreso. 11th Int. Conf. on Laser Ablation. Playa del Carmen (México). 2011
Luque-Estepa, Antonio;Flores, Guadalupe;Perdigones-Sanchez, Francisco Antonio;Garcia-Ortega, Juan De La Cruz;Quero-Reboul, Jose Manuel:
Combination of PCB-MEMS and laser ablation to construct inexpensive accelerometers. Ponencia en Congreso. 37th Annual Conferenceon IEEE Industrial Electronic Society. Melburne. 2011
Combination of PCB-MEMS and laser ablation to construct inexpensive accelerometers. Ponencia en Congreso. 37th Annual Conferenceon IEEE Industrial Electronic Society. Melburne. 2011
Villegas-,Javier;Perdigones-Sanchez, Francisco Antonio;Moreno-Lopez, Jose Miguel;Quero-Reboul, Jose Manuel:
TOWARDS A LOW-COST PRODUCTION OF MONODISPERSED MICROBUBBLES USING PCB-MEMS TECHNOLOGY. Ponencia en Congreso. SPANISH CONFERENCE ON ELECTRON DEVICE - 8TH (8) (8.2011.PALMA DE MALLORCA). PALMA DE MALLORCA. 2011
TOWARDS A LOW-COST PRODUCTION OF MONODISPERSED MICROBUBBLES USING PCB-MEMS TECHNOLOGY. Ponencia en Congreso. SPANISH CONFERENCE ON ELECTRON DEVICE - 8TH (8) (8.2011.PALMA DE MALLORCA). PALMA DE MALLORCA. 2011
Aracil-Fernandez, Carmen;Perdigones-Sanchez, Francisco Antonio;Riveros-,Jose A.;Bogado-Martínez, Blás Juan Andrés;Quero-Reboul, Jose Manuel:
PNEUMATIC FREE PISTON FABRICATED IN SU-8 FOR MEMS APPLICATIONS. Ponencia en Congreso. SPANISH CONFERENCE ON ELECTRON DEVICE - 8TH (8) (8.2011.PALMA DE MALLORCA). PALMA DE MALLORCA. 2011
PNEUMATIC FREE PISTON FABRICATED IN SU-8 FOR MEMS APPLICATIONS. Ponencia en Congreso. SPANISH CONFERENCE ON ELECTRON DEVICE - 8TH (8) (8.2011.PALMA DE MALLORCA). PALMA DE MALLORCA. 2011
Moreno-Lopez, Jose Miguel;Perdigones-Sanchez, Francisco Antonio;Quero-Reboul, Jose Manuel:
FABRICATION PROCESS OF A SU-8 MONOLITHIC PRESSURIZED MICROCHAMBER FOR PRESSURE DRIVEN MICROFLUIDIC APPLICATIONS. Ponencia en Congreso. SPANISH CONFERENCE ON ELECTRON DEVICE - 8TH (8) (8.2011.PALMA DE MALLORCA). PALMA DE MALLORCA. 2011
FABRICATION PROCESS OF A SU-8 MONOLITHIC PRESSURIZED MICROCHAMBER FOR PRESSURE DRIVEN MICROFLUIDIC APPLICATIONS. Ponencia en Congreso. SPANISH CONFERENCE ON ELECTRON DEVICE - 8TH (8) (8.2011.PALMA DE MALLORCA). PALMA DE MALLORCA. 2011
Luque-Estepa, Antonio;Perdigones-Sanchez, Francisco Antonio;Medina-Medina,Diego;Garcia-Ortega, Juan De La Cruz;Quero-Reboul, Jose Manuel:
CAPACITIVE PRESSURE SENSOR FABRICATED USING PRINTED CIRCUIT BOARD TECHNIQUES. Ponencia en Congreso. SPANISH CONFERENCE ON ELECTRON DEVICE - 8TH (8) (8.2011.PALMA DE MALLORCA). PALMA DE MALLORCA. 2011
CAPACITIVE PRESSURE SENSOR FABRICATED USING PRINTED CIRCUIT BOARD TECHNIQUES. Ponencia en Congreso. SPANISH CONFERENCE ON ELECTRON DEVICE - 8TH (8) (8.2011.PALMA DE MALLORCA). PALMA DE MALLORCA. 2011
Luque-Estepa, Antonio;Flores, Guadalupe;Perdigones-Sanchez, Francisco Antonio;Medina, Diego ;García, Juan ;Quero, José M.:
Combination of PCBMEMS and Laser Ablation to Construct Inexpensive Accelerometers. Ponencia en Congreso. 37th Annual Conference of the IEEE Industrial Electronics Society. MELBOURNE, AUSTRALIA. 2011
Combination of PCBMEMS and Laser Ablation to Construct Inexpensive Accelerometers. Ponencia en Congreso. 37th Annual Conference of the IEEE Industrial Electronics Society. MELBOURNE, AUSTRALIA. 2011
Moreno-Lopez, Jose Miguel;Perdigones-Sanchez, Francisco Antonio;Aracil-Fernandez, Carmen;Luque-Estepa, Antonio;Garcia-Ortega, Juan De La Cruz;Delgado-Seseña, Francisco Jose;Quero-Reboul, Jose Manuel:
Fast-prototyping microsystem technologies for autonomous microfluidic devices. Ponencia en Congreso. IBERNAM Meeting and 1st International Workshop on Micro and Nanosystems. Zaragoza, España. 2010
Fast-prototyping microsystem technologies for autonomous microfluidic devices. Ponencia en Congreso. IBERNAM Meeting and 1st International Workshop on Micro and Nanosystems. Zaragoza, España. 2010
Perdigones-Sanchez, Francisco Antonio;Moreno-Lopez, Jose Miguel;Luque-Estepa, Antonio;Aracil-Fernandez, Carmen;Quero-Reboul, Jose Manuel:
SAFETY VALVE IN PCB-MEMS TECHNOLOGY FOR LIMITING PRESSURE IN MICROFLUIDIC APPLICATIONS. Ponencia en Congreso. IEEE INTERNATIONAL CONFERENCE ON INDUSTRIAL TECHNOLOGY () (.2010.VIÑA DEL MAR, CHILE). VIÑA DEL MAR, CHILE. 2010
SAFETY VALVE IN PCB-MEMS TECHNOLOGY FOR LIMITING PRESSURE IN MICROFLUIDIC APPLICATIONS. Ponencia en Congreso. IEEE INTERNATIONAL CONFERENCE ON INDUSTRIAL TECHNOLOGY () (.2010.VIÑA DEL MAR, CHILE). VIÑA DEL MAR, CHILE. 2010
Perdigones-Sanchez, Francisco Antonio;Luque-Estepa, Antonio;Quero-Reboul, Jose Manuel:
LIQUID ASPIRATION DEVICE BASED ON VENTURI EFFECT BUILT ON PDMS. Ponencia en Congreso. CONFERENCIA DE DISPOSITIVOS ELECTRONICOS (7) (7.2009.SANTIAGO DE COMPOSTELA). SANTIAGO DE COMPOSTELA. 2009
LIQUID ASPIRATION DEVICE BASED ON VENTURI EFFECT BUILT ON PDMS. Ponencia en Congreso. CONFERENCIA DE DISPOSITIVOS ELECTRONICOS (7) (7.2009.SANTIAGO DE COMPOSTELA). SANTIAGO DE COMPOSTELA. 2009
Garcia-Ortega, Juan De La Cruz;Quero-Reboul, Jose Manuel;López-Tarrida, Cristina;Delgado-Seseña, Francisco Jose;Luque-Estepa, Antonio;Perdigones-Sanchez, Francisco Antonio;Aracil-Fernandez, Carmen;Moreno-Lopez, Jose Miguel:
MEMS APPLICATIONS IN THE UNIV. OF SEVILLE: MICROFLUIDICS AND AEROSPACE. Comunicación en congreso. TRANS-PYRENEES MEETING ON MICRO AND NANOSYSTEMS () (.2008.TOULOUSE). TOULOUSE. 2008
MEMS APPLICATIONS IN THE UNIV. OF SEVILLE: MICROFLUIDICS AND AEROSPACE. Comunicación en congreso. TRANS-PYRENEES MEETING ON MICRO AND NANOSYSTEMS () (.2008.TOULOUSE). TOULOUSE. 2008
Perdigones-Sanchez, Francisco Antonio;Luque-Estepa, Antonio;Gañan-Calvo, Alfonso Miguel;Quero-Reboul, Jose Manuel:
STABILITY ANALYSIS AND FABRICATION PROCESS OF A MULTIPLE FLOW FOCUSING MICRODEVICE BUILT IN SU-8. Ponencia en Congreso. IEEE INTERNATIONAL SYMPOSIUM ON INDUSTRIAL ELECTRONICS, ISIE 2007. VIGO (ESPAÑA). 2007
STABILITY ANALYSIS AND FABRICATION PROCESS OF A MULTIPLE FLOW FOCUSING MICRODEVICE BUILT IN SU-8. Ponencia en Congreso. IEEE INTERNATIONAL SYMPOSIUM ON INDUSTRIAL ELECTRONICS, ISIE 2007. VIGO (ESPAÑA). 2007
Perdigones-Sanchez, Francisco Antonio;Luque-Estepa, Antonio;Gañan-Calvo, Alfonso Miguel;Esteve, Jaume ;Monserrat, Josep;Quero-Reboul, Jose Manuel:
TOWARDS A MICROSYTEM OF MULTIPLE PRODUCTION OF MICRO-DROPS MANUFACTURED ON SILICON. Ponencia en Congreso. 2007 SPANISH CONFERENCE ON ELECTRON DEVICES. San Lorenzo de El Escorial. 2007
TOWARDS A MICROSYTEM OF MULTIPLE PRODUCTION OF MICRO-DROPS MANUFACTURED ON SILICON. Ponencia en Congreso. 2007 SPANISH CONFERENCE ON ELECTRON DEVICES. San Lorenzo de El Escorial. 2007
Perdigones-Sanchez, Francisco Antonio:
Pressurized microvalve with SMD-based activation to drive fluid in low-cost and autonomous MEMS. Poster en Congreso. . .
Pressurized microvalve with SMD-based activation to drive fluid in low-cost and autonomous MEMS. Poster en Congreso. . .
Perdigones-Sanchez, Francisco Antonio:
Pressurized microvalve with. Poster en Congreso. . .
Pressurized microvalve with. Poster en Congreso. . .
Artículos publicados
Perdigones-Sanchez, Francisco Antonio;Quero, José M.:
Printed Circuit Boards: The layers' functions for electronic and biomedical engineering. Micromachines. 2022. Vol: 13. Núm: 3. Pág. 460-1-33. https://doi.org/10.3390/mi13030460.
Printed Circuit Boards: The layers' functions for electronic and biomedical engineering. Micromachines. 2022. Vol: 13. Núm: 3. Pág. 460-1-33. https://doi.org/10.3390/mi13030460.
Perdigones-Sanchez, Francisco Antonio:
Editorial for the Special Issue on Lab-on-PCB Devices. Micromachines. 2022. Vol: 13. Núm: 7. Pág. 1-4. 10.3390/mi13071001.
Editorial for the Special Issue on Lab-on-PCB Devices. Micromachines. 2022. Vol: 13. Núm: 7. Pág. 1-4. 10.3390/mi13071001.
Perdigones-Sanchez, Francisco Antonio;Urbano-Gámez, Jesús David;Cabello, Miguel;Esteban-pérez, Andrea;Quintero, Alejandro;Díaz-campillejo, Álvaro;Quero, José M.:
Lab-on-PCB With Pre-Stored Reagents at Low Temperature and Automatic Microfluidic Handling. Journal of Microelectromechanical Systems. 2022. Vol: 31. Núm: 6. Pág. 912-917. 10.1109/JMEMS.2022.3200297.
Lab-on-PCB With Pre-Stored Reagents at Low Temperature and Automatic Microfluidic Handling. Journal of Microelectromechanical Systems. 2022. Vol: 31. Núm: 6. Pág. 912-917. 10.1109/JMEMS.2022.3200297.
Urbano-Gámez, Jesús David;Valdés, Lourdes;Aracil-Fernandez, Carmen;De la Cerda, Berta;Perdigones-Sanchez, Francisco Antonio;Plaza, Álvaro ;Díaz-corrales, Francisco;Relimpio, Isabel;Quero, José M.:
Biocompatibility Study of a Commercial Printed Circuit Board for Biomedical Applications: Lab-on-PCB for Organotypic Retina Cultures. Micromachines. 2021. Vol: 12. Núm: 12. Pág. 1469-1468. https://doi.org/10.3390/mi12121469.
Biocompatibility Study of a Commercial Printed Circuit Board for Biomedical Applications: Lab-on-PCB for Organotypic Retina Cultures. Micromachines. 2021. Vol: 12. Núm: 12. Pág. 1469-1468. https://doi.org/10.3390/mi12121469.
Cabello, Miguel;Domínguez-García, Inmaculada;Perdigones-Sanchez, Francisco Antonio;Aracil-Fernandez, Carmen;Quero, José M.:
Low cost SU-8 lift-off process to fabricate a gold/glass microelectrodes array for culturing applications. Microsystem Technologies. 2021. 10.1007/s00542-020-05206-9.
Low cost SU-8 lift-off process to fabricate a gold/glass microelectrodes array for culturing applications. Microsystem Technologies. 2021. 10.1007/s00542-020-05206-9.
Perdigones-Sanchez, Francisco Antonio:
Lab-on-PCB and Flow Driving: A Critical Review. Micromachines. 2021. Vol: 12. Núm: 2. Pág. 175-197. 10.3390/mi12020175 .
Lab-on-PCB and Flow Driving: A Critical Review. Micromachines. 2021. Vol: 12. Núm: 2. Pág. 175-197. 10.3390/mi12020175 .
Urbano-Gámez, Jesús David;Perdigones-Sanchez, Francisco Antonio;Quero, José M.:
Semi-Automatic Lab-on-PCB System for Agarose Gel Preparation and Electrophoresis for Biomedical Applications. Micromachines. 2021. Vol: 12. Núm: 9. Pág. 1071-1071. https://doi.org/10.3390/mi12091071.
Semi-Automatic Lab-on-PCB System for Agarose Gel Preparation and Electrophoresis for Biomedical Applications. Micromachines. 2021. Vol: 12. Núm: 9. Pág. 1071-1071. https://doi.org/10.3390/mi12091071.
Perdigones-Sanchez, Francisco Antonio;Cabello, Miguel;Quero, José M.:
Single-use impulsion system for displacement of liquids on thermoplastic-based lab on chip. Sensors and Actuators A: Physical. 2019. Vol: 298. https://doi.org/10.1016/j.sna.2019.111568.
Single-use impulsion system for displacement of liquids on thermoplastic-based lab on chip. Sensors and Actuators A: Physical. 2019. Vol: 298. https://doi.org/10.1016/j.sna.2019.111568.
Cabello, Miguel;Quero, José M.;Mozo, Marta;De La Cerda-Haynes, Berta;Aracil-Fernandez, Carmen;Díaz-corrales, Francisco J.;Perdigones-Sanchez, Francisco Antonio;Valdés-sánchez, Lourdes;Relimpio, Maria Isabel;Bhattacharya-, Shom Shanker:
Electrostimulation in an autonomous culture lab-on-chip provides neuroprotection of a retinal explant from a retinitis pigmentosa mouse-model. Sensors and Actuators B: Chemical. 2019. Vol: 288. Pág. 337-346. https://doi.org/10.1016/j.snb.2019.02.118.
Electrostimulation in an autonomous culture lab-on-chip provides neuroprotection of a retinal explant from a retinitis pigmentosa mouse-model. Sensors and Actuators B: Chemical. 2019. Vol: 288. Pág. 337-346. https://doi.org/10.1016/j.snb.2019.02.118.
Perdigones-Sanchez, Francisco Antonio;Quero, José M.:
Highly integrable and normally open microvalve for industrial thermoplastic-based lab on PCB. Sensors and Actuators A: Physical. 2019. Vol: 300. Núm: 111639. https://doi.org/10.1016/j.sna.2019.111639.
Highly integrable and normally open microvalve for industrial thermoplastic-based lab on PCB. Sensors and Actuators A: Physical. 2019. Vol: 300. Núm: 111639. https://doi.org/10.1016/j.sna.2019.111639.
Franco, Emilio;Perdigones-Sanchez, Francisco Antonio;Salvador, Blas;Quero, José M.:
Bonding process using integrated electrothermal actuators for microfluidic circuits fabrication. Journal of Micromechanics and Microengineering. 2018. 10.1016/j.mee.2018.02.019.
Bonding process using integrated electrothermal actuators for microfluidic circuits fabrication. Journal of Micromechanics and Microengineering. 2018. 10.1016/j.mee.2018.02.019.
Franco, Emilio;Salvador, Blas;Perdigones-Sanchez, Francisco Antonio;Cabello, Miguel;Quero, José M.:
Fabrication method of lab-on-PCB devices using a microheater with a thermo-mechanical barrier. Microelectronic Engineering. 2018. Vol: 194. Pág. 31-39. 10.1016/j.mee.2018.02.019.
Fabrication method of lab-on-PCB devices using a microheater with a thermo-mechanical barrier. Microelectronic Engineering. 2018. Vol: 194. Pág. 31-39. 10.1016/j.mee.2018.02.019.
Flores, Guadalupe;Aracil-Fernandez, Carmen;Perdigones-Sanchez, Francisco Antonio;Quero, José M.:
Lab-protocol-on-PCB: Prototype of a laboratory protocol on printed circuit board using MEMS technologies. Microelectronic Engineering. 2018. Vol: 200. Pág. 26-31. https://doi.org/10.1016/j.mee.2018.08.003.
Lab-protocol-on-PCB: Prototype of a laboratory protocol on printed circuit board using MEMS technologies. Microelectronic Engineering. 2018. Vol: 200. Pág. 26-31. https://doi.org/10.1016/j.mee.2018.08.003.
Perdigones-Sanchez, Francisco Antonio;Franco, Emilio;Salvador, Blas;Quero, José M.:
Highly Integrable Microfluidic Impulsion System for Precise Displacement of Liquids on Lab on PCBs. Journal of Microelectromechanical Systems. 2018. 10.1016/j.mee.2018.02.019.
Highly Integrable Microfluidic Impulsion System for Precise Displacement of Liquids on Lab on PCBs. Journal of Microelectromechanical Systems. 2018. 10.1016/j.mee.2018.02.019.
Salvador, Blas;Franco, Emilio;Perdigones-Sanchez, Francisco Antonio;Quero-Reboul, Jose Manuel:
Fabrication process for inexpensive, biocompatible and transparent PCBs. Application to a flow meter. Microelectronic Engineering. 2017. Vol: 173. Pág. 6-12.
Fabrication process for inexpensive, biocompatible and transparent PCBs. Application to a flow meter. Microelectronic Engineering. 2017. Vol: 173. Pág. 6-12.
Cabello, Miguel;Aracil-Fernandez, Carmen;Perdigones-Sanchez, Francisco Antonio;Mozo, Marta;De La Cerda-Haynes, Berta;Quero, José M.:
Gold microelectrodes array embedded in PDMS for electrical stimulation and signal detection. Sensors and Actuators B: Chemical. 2017. Vol: 257. Pág. 954-962. https://doi.org/10.1016/j.snb.2017.11.026.
Gold microelectrodes array embedded in PDMS for electrical stimulation and signal detection. Sensors and Actuators B: Chemical. 2017. Vol: 257. Pág. 954-962. https://doi.org/10.1016/j.snb.2017.11.026.
Souilah, Mohamed;Chaabi, Abdelhafid;Perdigones-Sanchez, Francisco Antonio;Quero-Reboul, Jose Manuel;Flores, Guadalupe;Ras Lain, Mohamed:
Fabrication Process for PCBMEMS Capacitive Pressure Sensors Using the Cu layer to Define the Gap. IEEE Sensors Journal. 2016. Vol: 16. Núm: 5. Pág. 1151-1157. 10.1109/JSEN.2015.2503405.
Fabrication Process for PCBMEMS Capacitive Pressure Sensors Using the Cu layer to Define the Gap. IEEE Sensors Journal. 2016. Vol: 16. Núm: 5. Pág. 1151-1157. 10.1109/JSEN.2015.2503405.
Aracil-Fernandez, Carmen;Perdigones-Sanchez, Francisco Antonio;Moreno-Lopez, Jose Miguel;Luque-Estepa, Antonio;Quero-Reboul, Jose Manuel:
Portable Lab-on-PCB platform for autonomous micromixing. Microelectronic Engineering. 2015. Vol: 131. Pág. 13-18. 10.1016/j.mee.2014.10.018.
Portable Lab-on-PCB platform for autonomous micromixing. Microelectronic Engineering. 2015. Vol: 131. Pág. 13-18. 10.1016/j.mee.2014.10.018.
Flores, Guadalupe;Perdigones-Sanchez, Francisco Antonio;Aracil-Fernandez, Carmen;Quero-Reboul, Jose Manuel:
Pressurization method for controllable impulsion of liquids in microfluidic platforms. Microelectronic Engineering. 2015. Vol: 140. Pág. 11-17. 10.1016/j.mee.2015.05.002.
Pressurization method for controllable impulsion of liquids in microfluidic platforms. Microelectronic Engineering. 2015. Vol: 140. Pág. 11-17. 10.1016/j.mee.2015.05.002.
Perdigones-Sanchez, Francisco Antonio;Aracil-Fernandez, Carmen;Moreno-Lopez, Jose Miguel;Luque-Estepa, Antonio;Quero-Reboul, Jose Manuel:
Highly integrable pressurized microvalve for portable SU-8 microfluidic platforms. Journal of Microelectromechanical Systems. 2014. Vol: 23. Pág. 398- 405. 10.1109/JMEMS.2013.2276934.
Highly integrable pressurized microvalve for portable SU-8 microfluidic platforms. Journal of Microelectromechanical Systems. 2014. Vol: 23. Pág. 398- 405. 10.1109/JMEMS.2013.2276934.
Aracil-Fernandez, Carmen;Perdigones-Sanchez, Francisco Antonio;Moreno-Lopez, Jose Miguel;Luque-Estepa, Antonio;Flores, Guadalupe;Quero-Reboul, Jose Manuel:
Depressurised reservoirs for portable fluid extraction in SU-8-based microfluidic systems. Micro and Nano Letters. 2014. Vol: 9. Núm: 11. Pág. 821-824. 10.1049/mnl.2014.0481.
Depressurised reservoirs for portable fluid extraction in SU-8-based microfluidic systems. Micro and Nano Letters. 2014. Vol: 9. Núm: 11. Pág. 821-824. 10.1049/mnl.2014.0481.
Flores, Guadalupe;Aracil-Fernandez, Carmen;Perdigones-Sanchez, Francisco Antonio;Quero-Reboul, Jose Manuel:
Low consumption single-use microvalve for microfluidic PCB-based platforms. Journal of Micromechanics and Microengineering. 2014. Vol: 24. Núm: 6. Pág. 1-6. http://dx.doi.org/10.1088/0960-1317/24/6/065013.
Low consumption single-use microvalve for microfluidic PCB-based platforms. Journal of Micromechanics and Microengineering. 2014. Vol: 24. Núm: 6. Pág. 1-6. http://dx.doi.org/10.1088/0960-1317/24/6/065013.
Perdigones-Sanchez, Francisco Antonio;Luque-Estepa, Antonio;Quero-Reboul, Jose Manuel:
Correspondence Between Electronics and Fluids in MEMS: Designing Microfluidic Systems Using Electronics. IEEE Industrial Electronics Magazine. 2014. Vol: 8. Núm: 4. Pág. 6-17. 10.1109/MIE.2014.2318062.
Correspondence Between Electronics and Fluids in MEMS: Designing Microfluidic Systems Using Electronics. IEEE Industrial Electronics Magazine. 2014. Vol: 8. Núm: 4. Pág. 6-17. 10.1109/MIE.2014.2318062.
Perdigones-Sanchez, Francisco Antonio;Garcia, Jose Maria;Quero-Reboul, Jose Manuel:
Fabrication process for integration of SU-8 check valves on printed circuit board- based microfluidic platforms. Micro and Nano Letters. 2014. Vol: 9. Núm: 1. Pág. 37-40. 10.1049/mnl.2013.0573.
Fabrication process for integration of SU-8 check valves on printed circuit board- based microfluidic platforms. Micro and Nano Letters. 2014. Vol: 9. Núm: 1. Pág. 37-40. 10.1049/mnl.2013.0573.
Perdigones-Sanchez, Francisco Antonio;Aracil-Fernandez, Carmen;Quero-Reboul, Jose Manuel;Gutierrez, Manuel ;Jiménez, Cecilia ;Giménez, Pablo:
Integration method of silicon sensors on SU-8-based microfluidic platforms. Microsystem Technologies. 2014. Vol: 21. Núm: 1. Pág. 155-161. 10.1007/s00542-014-2082-2.
Integration method of silicon sensors on SU-8-based microfluidic platforms. Microsystem Technologies. 2014. Vol: 21. Núm: 1. Pág. 155-161. 10.1007/s00542-014-2082-2.
Perdigones-Sanchez, Francisco Antonio;Luque-Estepa, Antonio;Gañan-Calvo, Alfonso Miguel;Quero-Reboul, Jose Manuel:
Analysis and design process of a bi-membrane structure for micro-flow regulators. Microsystem Technologies. 2013. Vol: 19. Núm: 2. Pág. 227-236. 10.1007/s00542-012-1628-4.
Analysis and design process of a bi-membrane structure for micro-flow regulators. Microsystem Technologies. 2013. Vol: 19. Núm: 2. Pág. 227-236. 10.1007/s00542-012-1628-4.
Luque-Estepa, Antonio;Flores, Guadalupe;Perdigones-Sanchez, Francisco Antonio;Medina, Diego;Garcia, Juan;Quero-Reboul, Jose Manuel:
Single axis accelerometer fabricated using Printed Circuit Board techniques and laser ablation. Sensors and Actuators A: Physical. 2013. Vol: 192. Pág. 119-123. http://dx.doi.org/10.1016/j.sna.2012.11.044.
Single axis accelerometer fabricated using Printed Circuit Board techniques and laser ablation. Sensors and Actuators A: Physical. 2013. Vol: 192. Pág. 119-123. http://dx.doi.org/10.1016/j.sna.2012.11.044.
Perdigones-Sanchez, Francisco Antonio;Luque-Estepa, Antonio;Morales, José Antonio;Quero-Reboul, Jose Manuel:
Capacitive depression sensor for microfluidic pneumatic networks. Sensors and Actuators A: Physical. 2012. Vol: 173. Núm: 1. Pág. 75-80. 10.1016/j.sna.2011.10.020.
Capacitive depression sensor for microfluidic pneumatic networks. Sensors and Actuators A: Physical. 2012. Vol: 173. Núm: 1. Pág. 75-80. 10.1016/j.sna.2011.10.020.
Medina, D.;Perdigones-Sanchez, Francisco Antonio;Garcia-Ortega, Juan De La Cruz;Luque-Estepa, Antonio;Quero-Reboul, Jose Manuel:
Bonding, exposing and transferring technique in SU-8 and SU-8 laser micromachining combination for 3D, free-standing and multilevel microstructures. Micro and Nano Letters. 2012. Vol: 7. Núm: 5. Pág. 412-414. 10.1049/mnl.2012.0124.
Bonding, exposing and transferring technique in SU-8 and SU-8 laser micromachining combination for 3D, free-standing and multilevel microstructures. Micro and Nano Letters. 2012. Vol: 7. Núm: 5. Pág. 412-414. 10.1049/mnl.2012.0124.
Perdigones-Sanchez, Francisco Antonio;Luque-Estepa, Antonio;Quero-Reboul, Jose Manuel:
PNEUMATICALLY ACTUATED POSITIVE GAIN MICROVALVE WITH N-CHANNEL METAL-OXIDE SEMICONDUCTOR-LIKE BEHAVIOUR. Micro and Nano Letters. 2011. Vol: 6. Núm: 6. Pág. 363-365.
PNEUMATICALLY ACTUATED POSITIVE GAIN MICROVALVE WITH N-CHANNEL METAL-OXIDE SEMICONDUCTOR-LIKE BEHAVIOUR. Micro and Nano Letters. 2011. Vol: 6. Núm: 6. Pág. 363-365.
Perdigones-Sanchez, Francisco Antonio;Luque-Estepa, Antonio;Gañan-Calvo, Alfonso Miguel;Quero-Reboul, Jose Manuel:
HIGHLY INTEGRABLE FLOW REGULATOR WITH POSITIVE GAIN. Journal of Microelectromechanical Systems. 2011. Vol: 20. Núm: 1. Pág. 12-14. 10.1109/JMEMS.2010.2090509 .
HIGHLY INTEGRABLE FLOW REGULATOR WITH POSITIVE GAIN. Journal of Microelectromechanical Systems. 2011. Vol: 20. Núm: 1. Pág. 12-14. 10.1109/JMEMS.2010.2090509 .
Perdigones-Sanchez, Francisco Antonio;Moreno-Lopez, Jose Miguel;Luque-Estepa, Antonio;Quero-Reboul, Jose Manuel:
CHARACTERISATION OF THE FABRICATION PROCESS OF FREESTANDING SU-8 MICROSTRUCTURES INTEGRATED IN PRINTING CIRCUIT BOARD IN MICROELECTROMECHANICAL SYSTEM. Micro and Nano Letters. 2010. Vol: 5. Núm: 1. Pág. 7-13.
CHARACTERISATION OF THE FABRICATION PROCESS OF FREESTANDING SU-8 MICROSTRUCTURES INTEGRATED IN PRINTING CIRCUIT BOARD IN MICROELECTROMECHANICAL SYSTEM. Micro and Nano Letters. 2010. Vol: 5. Núm: 1. Pág. 7-13.
Perdigones-Sanchez, Francisco Antonio;Luque-Estepa, Antonio;Quero-Reboul, Jose Manuel:
NOVEL STRUCTURE FOR A PNEUMATICALLY CONTROLLED FLOW REGULATOR WITH POSITIVE GAIN. Journal of Microelectromechanical Systems. 2010. Vol: 19. Núm: 5. Pág. 1070-1078.
NOVEL STRUCTURE FOR A PNEUMATICALLY CONTROLLED FLOW REGULATOR WITH POSITIVE GAIN. Journal of Microelectromechanical Systems. 2010. Vol: 19. Núm: 5. Pág. 1070-1078.
Perdigones-Sanchez, Francisco Antonio;Luque-Estepa, Antonio;Quero-Reboul, Jose Manuel:
INTEGRATION OF POLYDIMETHYLSILOXANE MEMBRANES IN SU-8 STRUCTURES. Micro and Nano Letters. 2010. Vol: 5. Núm: 5. Pág. 333-335.
INTEGRATION OF POLYDIMETHYLSILOXANE MEMBRANES IN SU-8 STRUCTURES. Micro and Nano Letters. 2010. Vol: 5. Núm: 5. Pág. 333-335.
Aracil-Fernandez, Carmen;Quero-Reboul, Jose Manuel;Luque-Estepa, Antonio;Moreno-Lopez, Jose Miguel;Perdigones-Sanchez, Francisco Antonio:
PNEUMATIC IMPULSION DEVICE FOR MICROFLUIDIC SYSTEMS. Sensors and Actuators A: Physical. 2010. Vol: 163. Núm: 1. Pág. 247-254.
PNEUMATIC IMPULSION DEVICE FOR MICROFLUIDIC SYSTEMS. Sensors and Actuators A: Physical. 2010. Vol: 163. Núm: 1. Pág. 247-254.
Perdigones-Sanchez, Francisco Antonio;Luque-Estepa, Antonio;Quero-Reboul, Jose Manuel:
PDMS MICRODEVICE FOR PRECISE LIQUID ASPIRATION IN THE SUBMICROLITER RANGE BASED ON THE VENTURI EFFECT. JOURNAL OF MICROELECTRONIC ENGINEERING. 2010. Vol: 87. Núm: 11. Pág. 2103-2109.
PDMS MICRODEVICE FOR PRECISE LIQUID ASPIRATION IN THE SUBMICROLITER RANGE BASED ON THE VENTURI EFFECT. JOURNAL OF MICROELECTRONIC ENGINEERING. 2010. Vol: 87. Núm: 11. Pág. 2103-2109.
Aracil-Fernandez, Carmen;Perdigones-Sanchez, Francisco Antonio;Moreno-Lopez, Jose Miguel;Quero-Reboul, Jose Manuel:
BETTS: BONDING, EXPOSING AND TRANSFERRING TECHNIQUE IN SU-8 FOR MICROSYSTEMS FABRICATION. Journal of Micromechanics and Microengineering. 2010. Vol: 20. Núm: 3. Pág. 035008-035013.
BETTS: BONDING, EXPOSING AND TRANSFERRING TECHNIQUE IN SU-8 FOR MICROSYSTEMS FABRICATION. Journal of Micromechanics and Microengineering. 2010. Vol: 20. Núm: 3. Pág. 035008-035013.
Luque-Estepa, Antonio;Perdigones-Sanchez, Francisco Antonio;Esteve-,J;Montserrat-,Josep;Gañan-Calvo, Alfonso Miguel;Quero-Reboul, Jose Manuel:
REDUCTION OF DROPLET-SIZE DISPERSION IN PARALLEL FLOW-FOCUSING MICRODEVICES USING A PASSIVE METHOD. Journal of Micromechanics and Microengineering. 2009. Vol: 19. Núm: 4. Pág. 045029-045029. 10.1088/0960-1317/19/4/045029 .
REDUCTION OF DROPLET-SIZE DISPERSION IN PARALLEL FLOW-FOCUSING MICRODEVICES USING A PASSIVE METHOD. Journal of Micromechanics and Microengineering. 2009. Vol: 19. Núm: 4. Pág. 045029-045029. 10.1088/0960-1317/19/4/045029 .
Luque-Estepa, Antonio;Perdigones-Sanchez, Francisco Antonio;Esteve-,J;Montserrat-,Josep;Gañan-Calvo, Alfonso Miguel;Quero-Reboul, Jose Manuel:
SILICON MICRODEVICE FOR EMULSION PRODUCTION USING THREE-DIMENSIONAL FLOW FOCUSING. Journal of Microelectromechanical Systems. 2007. Vol: 16. Núm: 5. Pág. 1201-1208.
SILICON MICRODEVICE FOR EMULSION PRODUCTION USING THREE-DIMENSIONAL FLOW FOCUSING. Journal of Microelectromechanical Systems. 2007. Vol: 16. Núm: 5. Pág. 1201-1208.
Patentes
Perdigones-Sanchez, Francisco Antonio;Quero, José M.;Cabello, Miguel: Método de unión de sustratos y plásticos mediante zona de adhesión térmica controlada. Número de patente:
Quero-Reboul, Jose Manuel;Perdigones-Sanchez, Francisco Antonio;Gañan-Calvo, Alfonso Miguel;Luque-Estepa, Antonio: PRODUCTION METHOD FOR A MICROMETRIC FLOW FOCUSING DEVICE. Número de patente:
Quero-Reboul, Jose Manuel;Perdigones-Sanchez, Francisco Antonio;Luque-Estepa, Antonio;Gañan-Calvo, Alfonso Miguel: MÉTODO DE FABRICACIÓN PARA DISPOSITIVO ENFOCADOR DE FLUIDO A ESCALA MICROMÉTRICA. Número de patente: ES2310967
Quero, José M.;Perdigones-Sanchez, Francisco Antonio: LABORATORIO EN CHIP (LoC) Y LECTOR ASOCIADO. Número de patente:
Perdigones-Sanchez, Francisco Antonio;Quero, José M.;Cabello, Miguel: Procedimiento y dispositivo microfluídico de precarga y liberación controlada de una o más muestras de fluidos. Número de patente: P202131167
Quero, José M.;Salvador, Blas;Perdigones-Sanchez, Francisco Antonio;Cabello, Miguel: Method for joining substrates and plastics using an area of controlled heat adhesion. Número de patente:
Perdigones-Sanchez, Francisco Antonio;Quero-Reboul, Jose Manuel: Sistema de presurización y actuación de cámaras con una conexión mecánica-eléctrica para la impulsión de fluido. Número de patente:
Tesis dirigidas o codirigidas
Flores, Guadalupe:
Self-contained microfluidic platform for general purpose Lab-onChip using PCB-MEMS technology. Tesis Doctoral. 2017
Self-contained microfluidic platform for general purpose Lab-onChip using PCB-MEMS technology. Tesis Doctoral. 2017
