JOSE ANTONIO REINOSO CUEVAS

Categoría
Profesor Ayudante Doctor
Perfil en ORCID
Perfil en Scopus
Correo electrónico
Área
Mecánica de Medios Continuos y T. de Estructuras

Investigación

Grupo de investigación

ELASTICIDAD Y RESISTENCIA DE MATERIALES (ELASTICIDAD Y RESISTENCIA DE M)

Proyectos y contratos de investigación

PANELES RIGIDIZADOS DE FIBRA DE CARBONO (PI-0675/2008 - Investigador/a)
Advanced and Low Cost Aircraft Structures (ALCAS) (AIP-4-CT-2005-516092 - Investigador/a)
ECLIPSE: Estructuras en Composites y materiales LIgeros para Procesos de Sencillo Ensamblaje Proyecto Convocatoria INNTERCONECTA (PI-0978/2012 - Investigador/a)
ECLIPSE: Estructuras en Composites y materiales LIgeros para Procesos de Sencillo EnsamblajeProyecto Convocatoria INNTERCONECTA (PI-0978/2012 - Investigador/a)
Desarrollo de un Procedimiento de Dimensionamiento por Unfolding en Materiales Compuestos (MAT2015-71309-P - Investigador/a)
Nuevos Enfoques de la Mecánica de la Fractura Computacional para la Caracterización de Inicio y Crecimiento de Grietas en Materiales Compuestos en Dif (MAT2015-71036-P - Investigador/a)
Elementos Laminares Avanzados para Análisis no Lineales de Paneles de Material Compuesto (DPI2012-37187 - Investigador/a)
Estudio del Comportamiento de Laminados Gruesos de Material Compuesto Sometidos a Cargas de Compresión. (P12-TEP-1050 - Investigador/a)
Análisis del Comportamiento de Paneles Rigidizados de Material Compuesto en Régimen de Postpandeo (P11-TEP-7093 - Investigador/a)
Desarrollo de un Procedimiento de Dimensionamiento por Unfolding en Materiales Compuestos (MAT201571309P - Investigador/a)
Nuevos Enfoques de la Mecánica de la Fractura Computacional para la Caracterización de Inicio y Crecimiento de Grietas en Materiales Compuestos en Dif (MAT201571036P - Investigador/a)
Estudio del Comportamiento de Laminados Gruesos de Material Compuesto Sometidos a Cargas de Compresión (P12-TEP-1050 - Investigador/a)
ECLIPSE: Estructuras en Composites y materiales LIgeros para Procesos de Sencillo Ensamblaje Proyecto Convocatoria INNTERCONECTA (PI-0978/2012 - Investigador/a)
Análisis del Comportamiento de Paneles Rigidizados de Material Compuesto en Régimen de Postpandeo (P11-TEP-7093 - Investigador/a)
Elementos Laminares Avanzados para Análisis no Lineales de Paneles de Material Compuesto (DPI2012-37187 - Investigador/a)
Micro-cracks - causes and consequences for the long-term stability of PV modules. (Investigador/a)
Desarrollo de un nuevo diseño de una pantalla ferroviaria triple función: viento, ruido y energía (TRIPANTALLA) (IPT-2011-1099-370000 - Participante)
Advanced and Low Cost Aircraft Structures (ALCAS) (AIP-4-CT-2005-516092 - Investigador/a)
Desarrollo de modelos cohesivos y de mecánica de la fractura para el estudio de uniones cocuradas y copegadas de materiales compuestos (P06-TEP-02045 - Investigador/a)

Libros publicados

Reinoso-Cuevas, José Antonio:
Development of a continuum shell element for the structural analysis of stiffened panels in postbuckling regime. EADS Chair of Aeronautical Studies. 2013. 978-84-616-7037-X
Reinoso-Cuevas, José Antonio:
Nonlinear dynamic behaviour of cables. Editorial Académica Española. 2011. ISBN:978-3-8443-3612-2
Reinoso-Cuevas, José Antonio:
Postpandeo de paneles rigidizados de composites. Editorial Académica Española. 2010. 978-3-8443-3584-2

Capítulos en Libros

Paggi, Marco;Bemporad, Alberto;Reinoso-Cuevas, José Antonio:
Computational methods for contact problems with roughness. Pág. 131-178. Springer, Cham. Springer, Cham. 2020.
Dean, Aamir;Reinoso-Cuevas, José Antonio;Sahraee, Shahab;Daum, Beneditk;Rolfes, Raimund :
Invariant-based finite strain anisotropic material model for fiber-reinforced composites. Pág. 83-110. Spinger Verlag. Spinger Verlag. 2018.
Haldar, Ayan ;Reinoso-Cuevas, José Antonio;Jansen, Eelco;Rolfes, Raimund:
Snap-through of bistable configurations generated from variable stiffness composites. In: Multiscale Modeling of Heterogeneous Structures. Pág. 61-82. Berlin Springer Verlag. Berlin Springer Verlag. 2018.
Reinoso-Cuevas, José Antonio;Blázquez-Gámez, Antonio M.;Paris-Carballo, Federico:
Damage simulations in Composite Structures in the Presence of Stress Gradients.. Pág. 391-424. Woodhead Publishing (Elsevier). Woodhead Publishing (Elsevier). 2016.
Reinoso-Cuevas, José Antonio;Paggi, Marco;Blázquez-Gámez, Antonio M.:
A modeling framework for the analysis of instabilities and delamination in composite shells..

Asistencia a congresos

Távara-Mendoza, Luis;Reinoso-Cuevas, José Antonio;Blázquez-Gámez, Antonio M.;Mantic-Lescisin, Vladislav:
A computational implementation of 3D mixed-mode fracture criteria which are invariant with respect to the reference system. Ponencia en Congreso. 22nd European Conference on Fracture. Belgrado, BELGRADE, BELGRADE (SERBIA). 2018
Blázquez-Gámez, Antonio M.;Justo-Estebaranz, Jesús;Reinoso-Cuevas, José Antonio;Paris-Carballo, Federico:
Procedure for the Estimation of the Shape Imperfections of a Composite Panel in order to Reproduce its Postbuckling Evolution. Ponencia en Congreso. 18th European Conference on Composite Materials. Atenas, Grecia. 2018
García, Lorenzo;Távara-Mendoza, Luis;Reinoso-Cuevas, José Antonio;Justo-Estebaranz, Jesús;Paris-Carballo, Federico:
Enhancing the Fracture Toughness of Adhesively Bonded Joints using 3D Printed Structured Interfaces . Ponencia en Congreso. 18th European Conference on Composite Materials. Atenas, Grecia. 2018
García, Lorenzo;Távara-Mendoza, Luis;Reinoso-Cuevas, José Antonio;Justo-Estebaranz, Jesús;Paris-Carballo, Federico:
3D Printed structured interfaces to improve fracture properties of bonded joints. Ponencia en Congreso. 15th European-Japanese Meeting on Composite Materials. Londres, Reino Unido. 2017
Távara-Mendoza, Luis;Mantic-Lescisin, Vladislav;Reinoso-Cuevas, José Antonio;Estefani-Morales, Alejandro;Paris-Carballo, Federico:
Fibre-matrix debonds in unidirectional fibre-reinforced composites under biaxial transverse loads. Ponencia en Congreso. 11th International Conference on Multiaxial Fatigue and Fracture. Sevilla, España. 2016
Blázquez-Gámez, Antonio M.;Reinoso-Cuevas, José Antonio;Paris-Carballo, Federico:
Damage simulations in a composite ¿-stiffened panel in postbuckling regime. Comunicación en congreso. 17th European Conference on Composite Materials (ECCM17). MUNICH (GERMANY). 2016
Reinoso-Cuevas, José Antonio;Paggi, M;Blázquez-Gámez, Antonio M.:
A finite thickness interface element for composite delamination. Comunicación en congreso. 17th European Conference on Composite Materials (ECCM17). MUNICH (GERMANY). 2016
Reinoso-Cuevas, José Antonio;Távara-Mendoza, Luis;Mantic-Lescisin, Vladislav;Paris-Carballo, Federico:
Three dimensional FE analysis of interfacial fibre/matrix debonding in fibre-reinforced composites. Ponencia en Congreso. eXtended Discretization MethodS. Ferrara, Italia. 2015
Estefani-Morales, Alejandro;Reinoso-Cuevas, José Antonio;Távara-Mendoza, Luis:
Estudio de despegues entre fibra y matriz en un material compuesto usando una subrutina de usuario UMAT. Ponencia en Congreso. XI Congreso Nacional de Materiales Compuestos. Móstoles (Madrid). 2015
Reinoso-Cuevas, José Antonio;Blázquez-Gámez, Antonio M.;Paris-Carballo, Federico:
Análisis de postpandeo de un panel rigidizado de material compuesto mediante técnicas de modelado mul-ti-global-local incluyendo daño interlaminar. Comunicación en congreso. XI Congreso Nacional de Materiales Compuestos. Móstoles (Madrid). 2015
Gómez, Blanca;Reinoso-Cuevas, José Antonio;Justo-Estebaranz, Jesús;Blázquez-Gámez, Antonio M.:
Failure analysis of skin-stringer interfaces. Comunicación en congreso. 16th European Conference on Composite Materials, ECCM 2014. Sevilla. 2014
Pastorino, Daniel;Blázquez-Gámez, Antonio M.;Reinoso-Cuevas, José Antonio;Paris-Carballo, Federico:
Composite plates modeling strategies for the estimation of transverse stresses. Comunicación en congreso. 16th European Conference on Composite Materials ECCM16. Seville, Spain. 2014
Estefani-Morales, Alejandro;Blázquez-Gámez, Antonio M.;Reinoso-Cuevas, José Antonio;Paris-Carballo, Federico;Cañas-Delgado, José:
Failure analysis of a CFRP run-out configuration with butt-strap joint. Comunicación en congreso. 16th European Conference on Composite Materials. . 2014
Blázquez-Gámez, Antonio M.;Reinoso-Cuevas, José Antonio;Cañas-Delgado, José;Paris-Carballo, Federico:
Análisis de la capacidad postpandeo de un panel rigidizado ante cargas de presión.. Comunicación en congreso. X CONGRESO NACIONAL DE MATERIALES COMPUESTOS. ALgeciras, Cádiz. 2013
Reinoso-Cuevas, José Antonio;Blázquez-Gámez, Antonio M.;Paris-Carballo, Federico;Irslinger, J;Ramm, E:
On different shell modeling in numerical analyses of a composite stiffened panel under uniform pressure. Comunicación en congreso. 10th World Conference on Computation Mechanics. Campinas, Sao Paulo, Brasil. 2012
Reinoso-Cuevas, José Antonio;Blázquez-Gámez, Antonio M.;Estefani-Morales, Alejandro;Paris-Carballo, Federico;Cañas-Delgado, José;Arevalo, E;Cruz, Francisco:
Mechanical response of a composite stiffner runout specimen including damge processes at the skin-stringer interfaces. Comunicación en congreso. 1st International Conference on Mechanics of Nano Micro and Macro Composite Structures. Turín, Italia. 2012
Reinoso-Cuevas, José Antonio;Blázquez-Gámez, Antonio M.;Paris-Carballo, Federico:
On the use of three dimensional material laws in the analyses of functionally graded shells. Ponencia en Congreso. 15th EUROPEAN CONFERENCE ON COMPOSITE MATERIALS. VENECIA, ITALIA. 2012
Blázquez-Gámez, Antonio M.;Reinoso-Cuevas, José Antonio;Paris-Carballo, Federico;Estefani-Morales, Alejandro;Arévalo, E;Cruz, F:
Analysis of a stringer run-out concept including damage initiation and evolution at the interfaces. Ponencia en Congreso. 15th EUROPEAN CONFERENCE ON COMPOSITE MATERIALS. VENECIA, ITALIA. 2012
Blázquez-Gámez, Antonio M.;Reinoso-Cuevas, José Antonio;Paris-Carballo, Federico;Cañas-Delgado, José:
Análisis de postpandeo de un panel rigidizado de material compuesto sometido a carga de presión. Comunicación en congreso. IX CONGRESO NACIONAL DE MATERIALES COMPUESTOS. BARCELONA-GERONA. 2011
Reinoso-Cuevas, José Antonio;París-carballo, Federico;Cruz, Francisco;Blázquez-Gámez, Antonio M.:
Influence of the modelization of frames on the analysis of a compressed cylindrical stiffened panel. Comunicación en congreso. International Conference in composite Structures 16. Oporto, Portugal. 2011
Reinoso-Cuevas, José Antonio;Blázquez-Gámez, Antonio M.;Paris-Carballo, Federico;Ramm, E:
Implementation of composite 7-parameters formulation of shell elements applying user subroutine UEL. Comunicación en congreso. 16th International Conference on Composite Structures. Oporto, Portugal. 2011
Reinoso-Cuevas, José Antonio;Blázquez-gámez, Antonio;París-carballo, Federico;Ramm, Ekkehard:
Implementation of composite 7-parameter formulation of shell elements applying user subroutine UEL. Comunicación en congreso. International Conference in composite Structures 16. Oporto, Portugal. 2011
Reinoso-Cuevas, José Antonio;Blázquez-Gámez, Antonio M.;Estefani-Morales, Alejandro;Paris-Carballo, Federico;Cruz-Domínguez,Francisco:
COMPARACIÓN DE LAS OPCIONES SUBMODELING Y COUPLING SHELL-TO-SOLID EN ANÁLISIS GLOBAL-LOCAL DE UN ELEMENTO DE MATERIAL COMPUESTO INCLUYENDO LA DEGRADAC. Comunicación en congreso. REUNIÓN DE USUARIOS DE SIMULIA (15) (15.2010.MADRID). . 2010
Reinoso-Cuevas, José Antonio;Blázquez-Gámez, Antonio M.;Paris-Carballo, Federico:
ANALISIS NUMERICO DE POSTPANDEO DE PANELES RIGIDIZADOS DE MATERIAL COMPUESTO. Comunicación en congreso. COMATCOMP 09 (8) (8.2009.SAN SEBASTIAN). SAN SEBASTIAN. 2009
Reinoso-Cuevas, José Antonio;Blázquez-Gámez, Antonio M.;Paris-Carballo, Federico:
ANALISIS NUMERICO DE PANDEO DE PANELES RIGIDIZADOS DE MATERIAL COMPUESTO. Comunicación en congreso. COMATCOMP 09 (8) (8.2009.SAN SEBASTIAN). SAN SEBASTIAN. 2009

Artículos publicados

Dean, Aamir;Reinoso-Cuevas, José Antonio;Kha, Niraj;Mahdi, E;Rolfes, R.:
A phase field approach for ductile fracture of short fibre reinforced composites. Theoretical and Applied Fracture Mechanics. 2020. Vol: 106. Núm: 102495. https://doi.org/10.1016/j.tafmec.2020.102495.
Fantoni, Francesca;Bacigalupo, A;Paggi, Marco;Reinoso-Cuevas, José Antonio:
A phase field approach for damage propagation in periodic microstructured materials. International Journal of Fracture. 2020. Vol: 223. Núm: 1-2. Pág. 53-76. https://link.springer.com/article/10.1007%2Fs10704-019-00400-x.
García, Lorenzo;Reinoso-Cuevas, José Antonio;Valverde-gonzález, Ángel;Martínez-pañeda, Emilio;Távara-Mendoza, Luis:
Numerical study of interface cracking in composite structures using a novel geometrically nonlinear Linear Elastic Brittle Interface Model: Mixed-mode. Composite Structures. 2020. Vol: 248. Núm: 112495. https://doi.org/10.1016/j.compstruct.2020.112495.
Guillén-hernández, Teresa;Reinoso-Cuevas, José Antonio;Paggi, Marco:
Phase field model for fracture analysis of functionally graded power-based shell structures. Mechanics of Advanced Materials and Structures. 2020. https://doi.org/10.1080/15376494.2020.1751354.
García, Lorenzo;Reinoso-Cuevas, José Antonio;Távara-Mendoza, Luis;Paris-Carballo, Federico:
A consistent finite displacement and rotation formulation of the Linear Elastic Brittle Interface Model for triggering interlaminar damage in fiber-re. Theoretical and Applied Fracture Mechanics. 2020. Vol: 108. Núm: 102644. https://doi.org/10.1016/j.tafmec.2020.102644.
Aranda, María Teresa;García-García, Israel;Reinoso-Cuevas, José Antonio;Mantic-Lescisin, Vladislav;Paggi, Marco:
Crack arrest through branching at curved weak interfaces: An experimental and numerical study. Theoretical and Applied Fracture Mechanics. 2020. Vol: 105. Núm: 102389. https://doi.org/10.1016/j.tafmec.2019.102389.
Dean, Aamir;Asur Vijaya Kumar, Pavan Kumar;Reinoso-Cuevas, José Antonio;Gerendt, Christian ;Paggi, Marco;Mahdi, Elsadig :
A multi phase-field fracture model for long fiber reinforced composites based on the Puck theory of failure. . Composite Structures. 2020. Núm: 112446. https://doi.org/10.1016/j.compstruct.2020.112446.
Quintanas-corominas, A.;Turón, A.;Reinoso-Cuevas, José Antonio;Casoni, E.;Paggi, Marco;Mayugo, J.a. :
A phase field approach enhanced with a cohesive zone model for modeling delamination induced by matrix cracking Open Access . Computer Methods in Applied Mechanics and Engineering. 2020. Vol: 358. Núm: 112618. https://doi.org/10.1016/j.cma.2019.112618.
Guillén-hernández, Teresa;Quintana-corominas, Adrià;García-García, Israel;Reinoso-Cuevas, José Antonio;Paggi, Marco;Turón, Albert:
In-situ strength effects in long fibre reinforced composites: A micro-mechanical analysis using the phase field approach of fracture. Theoretical and Applied Fracture Mechanics. 2020. Vol: 108. Núm: 102621. https://doi.org/10.1016/j.tafmec.2020.102621.
Dehghani, Hamidreza ;Desena-galarza, D. ;Jha, Niraj Kumar ;Reinoso-Cuevas, José Antonio;Merodio, Jose :
Bifurcation and post-bifurcation of an inflated and extended residually-stressed circular cylindrical tube with application to aneurysms initiation an. Finite Elements In Analysis And Design. 2019. Vol: 161. Pág. 51-60. https://doi.org/10.1016/j.finel.2019.04.004.
Areias, Pedro;Carrilho Lopes, José ;Santos, M. P. ;Rabczuk, Timon ;Reinoso-Cuevas, José Antonio:
Finite strain analysis of limestone / basaltic magma interaction and fracture: Low order mixed tetrahedron and remeshing. European Journal of Mechanics A: Solids. 2019. Vol: 73. Pág. 235-247. https://doi.org/10.1016/j.euromechsol.2018.09.003.
Reinoso-Cuevas, José Antonio;Durand-Neyra, Percy;Ramaiah-budarapu, Pattabhi ;Paggi, Marco:
Crack Patterns in Heterogenous Rocks Using a Combined Phase Field-Cohesive Interface Modeling Approach: A Numerical Study. Energies. 2019. Vol: 12. Núm: 965. Pág. 1-28. 10.3390/en12060965.
Mariggiò, Gregorio ;Reinoso-Cuevas, José Antonio;Corrado, Mauro;Paggi, Marco:
Peeling of thick adhesive interfaces: The role of dynamics and geometrical nonlinearity. Mechanics Research Communications. 2019. Vol: 94. Pág. 21-27. https://doi.org/10.1016/j.mechrescom.2018.08.018.
Jha, Niraj Kumar ;Reinoso-Cuevas, José Antonio;Merodio, Jose:
A general non-local constitutive relation for residually stressed solids. Mechanics Research Communications. 2019. Vol: 101. Núm: 103421. https://doi.org/10.1016/j.mechrescom.2019.103421.
Jha, Niraj Kumar ;Reinoso-Cuevas, José Antonio;Dehghani, Hamidreza ;Merodio, Jose:
A computational model for fiber-reinforced composites: hyperelastic constitutive formulation including residual stresses and damage. Computational Mechanics. 2019. Vol: 63. Pág. 931-948. https://doi.org/10.1007/s00466-018-1630-5.
Guillén-hernández, Teresa;García-García, Israel;Reinoso-Cuevas, José Antonio;Paggi, Marco:
A micromechanical analysis of inter-fiber failure in long reinforced composites based on the phase field approach of fracture combined with the cohesi. International Journal of Fracture. 2019. Vol: 220. Núm: 2. Pág. 181-203. https://doi.org/10.1007/s10704-019-00384-8.
Arteiro, Albertino;Catalanotti, Giuseppe ;Reinoso-Cuevas, José Antonio;Linde, Peter;Camanho, Pedro P. :
Simulation of the mechanical response of thin-ply composites: from computational micro-mechanics to structural analysis. Archives of Computational Methods in Engineering. 2019. Vol: 26. Pág. 1445-1487. https://doi.org/10.1007/s11831-018-9291-2.
Jha, Niraj Kumar ;Reinoso-Cuevas, José Antonio;Dehghani, Hamidreza ;Merodio, Jose :
Constitutive modeling framework for residually stressed viscoelastic solids at finite strains. Mechanics Research Communications. 2019. Vol: 95. Pág. 79-84. https://doi.org/10.1016/j.mechrescom.2019.01.003.
Reinoso-Cuevas, José Antonio;Paggi, Marco; Areias, Pedro;Blázquez-Gámez, Antonio M.:
Surface-based and solid shell formulations of the 7-parameter shell model for layered CFRP and functionally graded power-based composite structures. Mechanics of Advanced Materials and Structures. 2019. Vol: 26. Núm: 15. Pág. 1271-1289. 10.1080/15376494.2018.1432802.
Távara-Mendoza, Luis;Reinoso-Cuevas, José Antonio;Blázquez-Gámez, Antonio M.;Mantic-Lescisin, Vladislav:
On the 3D extension of failure models for adhesive joints under mixed-mode fracture conditions: LEBIM and CZM. Theoretical and Applied Fracture Mechanics. 2019. Vol: 100. Pág. 362-376. https://doi.org/10.1016/j.tafmec.2019.01.004.
Areias, Pedro;Reinoso-Cuevas, José Antonio;Camanho, Pedro Ponces;César Sá, Jose;Rabczuk, Timon:
Effective 2D and 3D crack propagation with local mesh refinement and the screened Poisson equation. Engineering Fracture Mechanics. 2018. Vol: 189. Pág. 339-360. 10.1016/j.engfracmech.2017.11.017.
Areias, Pedro;Jorge, Renato Natal;Cesar Sa, Jose ;Rabczuk, Timon;Reinoso-Cuevas, José Antonio:
General constitutive updating for finite strain formulations based on assumed strains and the Jacobian. Finite Elements In Analysis And Design. 2018. Vol: 143. Pág. 32-45. 10.1016/j.finel.2018.01.006.
Carollo, Valerio ;Reinoso-Cuevas, José Antonio;Paggi, Marco:
Modeling complex crack paths in ceramic laminates: A novel variational framework combining the phase field method of fracture and the cohesive zone m. Journal of the European Ceramic Society. 2018. 10.1016/j.jeurceramsoc.2018.01.035.
Távara-Mendoza, Luis;Reinoso-Cuevas, José Antonio;Castillo, David;Mantic-Lescisin, Vladislav:
Mixed-mode failure of interfaces studied by the 2D Linear Elastic-Brittle Interface Model: macro- and micro-mechanical finite element applications in . The Journal of Adhesion. 2018. Vol: 94. Núm: 8. Pág. 627-656. http://dx.doi.org/10.1080/00218464.2017.1320988.
García, Lorenzo;Távara-Mendoza, Luis;Reinoso-Cuevas, José Antonio;Justo-Estebaranz, Jesús;Paris-Carballo, Federico:
Analysis of 3D Printed Trapezoidal Interfaces by Means of a Novel Cohesive-Based Analytical Approach. Journal of Multiscale Modeling. 2018. Vol: 9. Núm: 3. 10.1142/S1756973718420015.
Paggi, Marco;Corrado, Mauro;Reinoso-Cuevas, José Antonio:
Fracture of solar-grade anisotropic polycrystalline Silicon: A combined phase field¿cohesive zone model approach. Computer Methods in Applied Mechanics and Engineering. 2018. Vol: 330. Pág. 123-148. 10.1016/j.cma.2017.10.021.
García, Lorenzo;Távara-Mendoza, Luis;Reinoso-Cuevas, José Antonio;Justo-Estebaranz, Jesús;Paris-Carballo, Federico:
Influencia de las interfases estructuradas en la tenacidad a la fractura de uniones adhesivas en especímenes DCB fabricados mediante impresión 3D: est. Anales de Mecánica de la Fractura. 2018. Vol: 35. Pág. 427-432.
García, Lorenzo;Távara-Mendoza, Luis;Reinoso-Cuevas, José Antonio;Justo-Estebaranz, Jesús;Paris-Carballo, Federico:
Fracture resistance of 3D printed adhesively bonded DCB composite specimens using structured interfaces: Experimental and theoretical study. Composite Structures. 2018. Vol: 188. Pág. 173-184. 10.1016/j.compstruct.2017.12.055.
Távara-Mendoza, Luis;Reinoso-Cuevas, José Antonio;Blázquez-Gámez, Antonio M.;Mantic-Lescisin, Vladislav:
ASPECTOS ASOCIADOS A LA EXTENSIÓN 3D DE MODELOS DE INTERFASE: CZM Y LEBIM. Anales de Mecánica de la Fractura. 2018. Vol: 35. Pág. 415-420.
García Guzmán, L;Távara-Mendoza, Luis;Reinoso-Cuevas, José Antonio;Justo-Estebaranz, Jesús;Paris-Carballo, Federico:
Estudio experimental de interfases no convencionales con patrones trapezoidales. Materiales Compuestos. 2017. Vol: 1. Pág. 92-98.
Reinoso-Cuevas, José Antonio;Paggi, Marco;Linder, Christian:
Phase field modeling of brittle fracture for enhanced assumed strain shells at large deformations: formulation and finite element implementation. Computational Mechanics. 2017. Vol: 59. Núm: 6. Pág. 981-1001.
Areias, P;Rabczuk, T;Reinoso-Cuevas, José Antonio;De Sa, J César :
Finite-strain low order shell using least-squares strains and two-parameter thickness extensibility. European Journal of Mechanics A: Solids. 2017. Vol: 61. Pág. 293-314. http://dx.doi.org/10.1016/j.euromechsol.2016.10.008.
Justo-Estebaranz, Jesús;Reinoso-Cuevas, José Antonio;Blázquez-Gámez, Antonio M.:
Experimental failure investigation of pull-off tests of single T-stiffened composite specimens. Composite Structures. 2017. https://doi.org/10.1016/j.compstruct.2017.04.070.
Dean, A;Sahraee, S;Özenc, K;Reinoso-Cuevas, José Antonio;Rolfes, R;Kaliske, M:
A thermodynamically consistent framework to couple damage and plasticity microplane-based formulations for fracture modeling: development and algorith. International Journal of Fracture. 2017. Vol: 203. Núm: 1. Pág. 115-134. 10.1007/s10704-016-0131-9.
Reinoso-Cuevas, José Antonio;Arteiro, Albertino;Paggi, Marco;Camanho, Pedro Ponces:
Strength prediction of notched thin ply laminates using finite fracture mechanics and the phase field approach. Composites Science and Technology. 2017. Vol: 150. Pág. 205-216. 10.1016/j.compscitech.2017.07.020.
Justo-Estebaranz, Jesús;Reinoso-Cuevas, José Antonio;Blázquez-Gámez, Antonio M.;Gómez, B.:
Ensayos de pull-off sobre probetas con rigidizadores en T. Materiales Compuestos. 2017. Vol: 1. Pág. 135-141.
Reinoso-Cuevas, José Antonio;Catalanotti, G;Blázquez-Gámez, Antonio M.;Areias, P;Camanho, P.p.;Paris-Carballo, Federico:
A consistent anisotropic damage model for laminated fiber-reinforced composites using the 3D-version of the Puck failure criterion. International Journal of Solids and Structures. 2017. Vol: 126-127. Pág. 37-53. 10.1016/j.ijsolstr.2017.07.023 .
Paggi, Marco;Reinoso-Cuevas, José Antonio:
Revisiting the problem of a crack impinging on an interface:A modeling framework for the interaction between the phase field approach for brittle frac. Computer Methods in Applied Mechanics and Engineering. 2017. Vol: 321. Pág. 145-172. https://doi.org/10.1016/j.cma.2017.04.004.
Dean, Aamir;Sahraee , Shahab;Reinoso-Cuevas, José Antonio;Rolfes, Raimund:
A new invariant-based thermo-plastic model for finite deformation analysis of short fibre reinforced composites: Development and numerical aspects. Composites Part B: Engineering. 2017. A new invariant-based thermo-plastic model for finite deformation analysis of short fibre reinforced composites: Development and numerical aspects.
Carollo, Valerio;Reinoso-Cuevas, José Antonio;Paggi, Marco:
A 3D finite strain model for intralayer and interlayer crack simulation coupling the phase field approach and cohesive zone model. Composite Structures. 2017. Vol: 182. Pág. 636-651. 10.1016/j.compstruct.2017.08.095.
Reinoso-Cuevas, José Antonio;Paggi, M;Blázquez-Gámez, Antonio M.:
A nonlinear finite thickness cohesive interface element for modeling delamination in fibre-reinforced composite laminates. Composites Part B: Engineering. 2017. Vol: 109. Pág. 116-128. http://dx.doi.org/10.1016/j.compositesb.2016.10.042.
Haldar, Ayan;Reinoso-Cuevas, José Antonio;Jansen, Eelco;Rolfes, Raimund :
Thermally induced multistable configurations of variable stiffness composite plates: Semi-analytical and finite element investigation. Composite Structures. 2017. https://doi.org/10.1016/j.compstruct.2017.02.014.
Budarapu, Pattabhi R.;Reinoso-Cuevas, José Antonio;Paggi, Marco:
Concurrently coupled solid shell-based adaptive multiscale method for fracture. Computer Methods in Applied Mechanics and Engineering. 2017. https://doi.org/10.1016/j.cma.2017.02.023.
Dean, A;Sahraee, S.;Reinoso-Cuevas, José Antonio;Rolfes, J.:
Finite deformation model for short fibre reinforced composites: application to hybrid metal-composite clinching joints. Composite Structures. 2016. Núm: 151. Pág. 162-171. http://dx.doi.org/10.1016/j.compstruct.2016.02.045.
Borri, C;Paggi, M;Reinoso-Cuevas, José Antonio;Borodich, F M:
Adhesive behaviour of bonded paper layers: Mechanical testing and statistical modelling. Proceedings of the Institution of Mechanical Engineers. Part C, Journal of Mechanical Engineering Science. 2016. Vol: 230. Núm: 9. Pág. 1440-1448. https://doi.org/10.1177/0954406215612502.
Reinoso-Cuevas, José Antonio;Blázquez-Gámez, Antonio M.:
Application and finite element implementation of 7-parameter shell element for geometrically nonlinear analysis of layered CFRP composites. Composite Structures. 2016. Vol: 139. Pág. 263-276. http://dx.doi.org/10.1016/j.compstruct.2015.12.009.
Távara-Mendoza, Luis;Reinoso-Cuevas, José Antonio;Estefani-Morales, Alejandro;Blázquez-Gámez, Antonio M.;Mantic-Lescisin, Vladislav;Paris-Carballo, Federico:
MODELO DE INTERFASE ELASTICA LINEAL FRAGIL (MIELF) APLICADO A PROBLEMAS TRIDIMENSIONALES CON CRECIMIENTO DE GRIETAS EN MODO MIXTO. Anales de Mecánica de la Fractura. 2016. Vol: 33. Pág. 1-6.
Reinoso-Cuevas, José Antonio;Blázquez-Gámez, Antonio M.:
Geometrically nonlinear analysis of functionally graded power-based and carbon nanotubes reinforced composites using a fully integrated solid shell el. Composite Structures. 2016. Vol: 152. Pág. 277-294. http://dx.doi.org/10.1016/j.compstruct.2016.05.036.
Reinoso-Cuevas, José Antonio;Blázquez-Gámez, Antonio M.;Távara-Mendoza, Luis;Paris-Carballo, Federico;Arellano, Carlos:
Damage tolerance of composite runout panels under tensile loading. Composites Part B: Engineering. 2016. Vol: 96. Pág. 79-93. http://dx.doi.org/10.1016/j.compositesb.2016.03.083.
Reinoso-Cuevas, José Antonio;Paggi, M;Areias, P:
A finite element framework for the interplay between delamination and buckling of rubber-like bi-material systems and stretchable electronics. Journal of the European Ceramic Society. 2016. Vol: 36. Núm: 9. Pág. 2371-2382. http://dx.doi.org/10.1016/j.jeurceramsoc.2016.01.002.
Hühne, Sina;Reinoso-Cuevas, José Antonio;Jansen, Eelco;Rolfes, Raimund :
A two-way loose coupling procedure for investigating the buckling and damage behaviour of stiffened composite panels. Composite Structures. 2015.
Areias, Pedro;Reinoso-Cuevas, José Antonio;Camanho, Pedro Ponces;Rabczuk, Timon:
A constitutive-based element-by-element crack propagation algorithm with local mesh refinement. Computational Mechanics. 2015. Vol: 56 . Núm: 2. Pág. 291-315.
Reinoso-Cuevas, José Antonio;Paggi, Marco;Rolfes, Raimund:
A computational framework for the interplay between delamination and wrinkling in functionally graded thermal barrier coatings. Computational Materials Science. 2015.
Paggi, Marco;Reinoso-Cuevas, José Antonio:
AN ANISOTROPIC LARGE DISPLACEMENT COHESIVE ZONE MODEL FOR FIBRILLAR AND CRAZING INTERFACES. International Journal of Solids and Structures. 2015. Vol: 69-70. Pág. 106-120.
B.a, Behrens ;Rolfes, Raimund ;Vucetic, M;Peshekhodov, I;Reinoso-Cuevas, José Antonio;Vogler, Matthias;Grbic, Nenad:
Material characterization for FEA of the clinching process of short fiber reinforced thermoplastics with an aluminum sheet. Advanced Materials Research. 2014. Vol: 966-967. Pág. 557-568. 10.4028/www.scientific.net/AMR.966-967.557.
Reinoso-Cuevas, José Antonio;Paggi, Marco:
A CONSISTENT INTERFACE ELEMENT FORMULATION FOR GEOMETRICAL AND MATERIAL NONLINEARITIES. Computational Mechanics. 2014. Vol: 54. Núm: 6. Pág. 1569-1581.
Reinoso-Cuevas, José Antonio;Blázquez-Gámez, Antonio M.;Estefani-Morales, Alejandro;Paris-Carballo, Federico;Cañas-Delgado, José:
A composite runout specimen subjected to tension-compression loading conditions: Experimental and global¿local finite element analysis. Composite Structures. 2013. Vol: 101. Pág. 274-289. http://dx.doi.org/10.1016/j.compstruct.2012.12.056.
Reinoso-Cuevas, José Antonio;Blázquez-gámez, Antonio;Estefani-Morales, Alejandro;París-carballo, Federico;Cañas-Delgado, José;Arévalo, Elena;Cruz, Francisco:
Experimental and three-dimensional Global-Local Finite Element analysis of a composite component including degradation process at the interface. Composites Part B: Engineering. 2012. Vol: 43. Núm: 4. Pág. 1929-1942. 10.1016/j.compositesb.2012.02.010.
Reinoso-Cuevas, José Antonio;Blázquez-gámez, Anonio ;París-carballo, Federico;Cañas-Delgado, José;Meléndez, Juan Carlos:
Postbuckling behavior of a pressurized stiffened composite panel - Part I: Experimental study. Composite Structures. 2012. Vol: 94. Núm: 5. Pág. 1533-1543.
Blázquez-gámez, Antonio;Reinoso-Cuevas, José Antonio;París-carballo, Federico;Cañas-delgado, José :
Postbuckling behavior of a pressurized stiffened composite panel - Part II: Numerical analysis. Effect of the geometrical imperfections. Composite Structures. 2012. Vol: 94. Núm: 5. Pág. 1544-1554. 10.1016/j.compstruct.2011.12.013.

Tesis dirigidas o codirigidas

Guillén-hernández, Teresa:
Computational Fracture Mechanics for Reliability of Composites at the Micro and Macro Scales. Tesis Doctoral. 2020
García, Lorenzo:
Mechanical behaviour of structured joints in 3D printed composite components: experimental, analytical and numerical study. Tesis Doctoral. 2020
Quintana-corominas, Adrià:
Damage events in fobre reinforced composites: Supercomputation and novel numerical techniques. Tesis Doctoral. 2019
Carollo, Valerio :
A Variational approach to brittle fracture and cohesive delamination: modeling and technological applications. Tesis Doctoral. 2018