ISABEL MONTEALEGRE MELENDEZ

Categoría
Profesor Titular de Universidad

Contacto

Teléfono
954554357
Correo electrónico
imontealegre@us.es

Departamento

Área
Ciencias de Materiales e Ingeniería Metalúrgica

Centro

Docencia

Investigación

Grupo de investigación

METALURGIA E INGENIERIA DE LOS MATERIALES (MIM)

Proyectos y contratos de investigación

ADVANCED TOOLS AND METHODS FOR HANDLING AND ASSEMBLY IN MICROTECHNOLOGY (MRTN-CT-2003-504826 - Investigador/a)
TECHNOLOGY FOR THE PRODUCTION OF MASSIVELY PARALLEL INTELLIGENT CANTILEVER: PROBE PLATFORMS FOR NANOSCALE ANALYSIS AND SYNTHESIS (NMP2-CT-2005-515739 - Investigador/a)
TOOLS AND TECHNOLOGIES FOR THE ANALYSIS AND SYNTHESIS OF NANOSTRUCTURES (P NMP4-CT-2005-516865 - Investigador/a)
TI6AL4V COMPOSITES WITH NANO-ADDITIVES (AAR/KNET - Investigador/a)
CHEMISTRY AND ADHESION AT THE INTERFACE OF CARBON-NANOTUBE REINFORCED, TI-MATRIX COMPOSITES (FWF-18952-N19 - Investigador/a)
NANO-MODIFIZIERTE BULKWERKSTOFFE FÜR LEICHTBAUANWENDUNGEN IM LUFT- UND RAUMFAHRTBEREICH (1.66.00238.0.0 - Investigador/a)
PULVERSPRIZGISSEN (POWDER INJECTION MOULDING) (1.66.00192.0.0 - Investigador/a)
RSA-RHP (1.W6.000599.0.0 - Investigador/a)
Incentivo al Grupo de Investigación TEP-123 (2017) (2017/TEP-123 - Investigador/a)
Ayudas para uso de los Servicios Generales de Investigación (CITIUS), VII Plan Propio de Investigación y Transferencia de la Universidad de Sevilla: 2 (Plan propio - Coordinador)
Ayudas para uso de los Servicios Generales de Investigación (CITIUS), VI Plan Propio de Investigación y Transferencia de la Universidad de Sevilla: 2 (PPI574/2020 - Investigador/a)
AYUDAS PARA EL USO DE LOS SERVICIOS GENERALES DE INVESTIGACIÓN (Universidad de Sevilla, VI Plan Propio de Investigación y Transferencia, 2019, I.5) (I.5 AYUDAS PARA EL USO DE LOS SERVICIOS GENERALES DE INVESTIGACIÓN - Coordinador)
Mirada Microscópica de los Materiales (. - Participante)
Técnicas avanzadas de caracterización de materiales compuestos de matriz metálica (MMCs) (Plan Propio - Investigador/a)
Caracterización de muestras sinterizadas (AE-1841/08/2018 - Responsable)
Determinación de propiedades mecánicas de muestras pulvimetalúrgicas (AE-1840/08/2018 - Investigador/a)
AYUDAS PARA EL USO DE LOS SERVICIOS GENERALES DE INVESTIGACIÓN (Universidad de Sevilla, VI Plan Propio de Investigación y Transferencia, 2018, I.5) (P2018/00000348 - Investigador/a)
Ensayos de caracterización Pulvimetalurgica (AE-1822/08/2018 - Investigador/a)
Introspección de los materiales (Participante)
Implementación caracterización y validación biológica de técnicas de modificación superficial del titanio poroso pulvimetalúrgico para aplicaciones bi (P12-TEP-1401 - Investigador/a)
Informe sobre la corrosividad de un terreno situado en Tarapacá (Chile) (ES-1371/2014 - Investigador/a)
Caracterización de componenetes pulvimetalúrgicos (AE-1343/2014 - Responsable)
IV Congreso Nacional de Pulvimetalurgia, Sevilla 2012 (MAT2011-14762-E - Responsable)
Desarrollo, Fabricación y Caracterización de Compuestos de Ti-Mg-Ag Porosos Biodegradables y Antibacterianos con un mejor Equilibrio Biomecánico y Bio (MAT2015-71284-P - Investigador/a)
Incentivo al Grupo de Investigación TEP-123 (2011) (2011/TEP-123 - Investigador/a)
Estudio de las causas de corrosión de aletas de cobre estañado pertenecientes a un aerorefrigerador (ES-1371-4/2015 - Participante)
Estudio de las causas de corrosión de tubos de cobre pertenecientes a un evaporador (ES-1371-2/2015 - Participante)

Libros publicados

Perez-Soriano, Eva Maria;Arévalo-Mora, Cristina;Montealegre-Meléndez, Isabel:
Colección de problemas resueltos de Ciencia de Materiales Aeroespaciales. Universidad de Sevilla. 2018. 978-84-472-1900-1
Montealegre-Meléndez, Isabel:
DEVELOPMENT OF TITANIUM METAL MATRIX COMPOSITES VIA POWDER METALLURGY. TECHNISCHE UNIVERSITAT WIEN. 2009.

Capítulos en Libros

Perez-Soriano, Eva Maria;Montealegre-Meléndez, Isabel;Arévalo-Mora, Cristina;Neubauer, Erich;Kitzmantel, Michael:
Effect of Processing Atmosphere and Secondary Operations on the Mechanical Properties of Additive Manufactured AISI 316L Stainless Steel by Plasma Met. Pág. 65-84. Mdpi. Mdpi. 2022.
Montealegre-Meléndez, Isabel;Arévalo-Mora, Cristina;Beltrán-Custodio, Ana María;Kitzmantel, M;Neubauer, E;Perez-Soriano, Eva Maria:
Reaction layer analysis of in situ reinforced titanium composites: influence of the starting material composition on the mechanical properties. Pág. 191-202. Mdpi. Mdpi. 2021.
Ariza, Enrique;Montealegre-Meléndez, Isabel;Arévalo-Mora, Cristina;Perez-Soriano, Eva Maria;Neubauer, Erich;Kitzmantel, Michael:
Plasma Metal Deposition for Metallic Materials. Pág. 1-14. IntechOpen. IntechOpen. 2021.
Perez-Soriano, Eva Maria;Montealegre-Meléndez, Isabel;Arévalo-Mora, Cristina;Neubauer, Erich;Kitzmantel, Michael:
Microstructural and XRD Analysis and Study of the Properties of the System Ti-TiAl-Ba4C Processed under Different Operational Conditions. Pág. 136-151. Mdpi. Mdpi. 2019.
Perez-Soriano, Eva Maria;Arévalo-Mora, Cristina;Montealegre-Meléndez, Isabel:
In Situ Titanium Composites: XRD Study of Secondary Phases Tied to the Processing Conditions and Starting Materials. Pág. 1-17. INTECHOPEN. INTECHOPEN. 2019.
Perez-Soriano, Eva Maria;Arévalo-Mora, Cristina;Montealegre-Meléndez, Isabel;Peña-muñoz, Ildefonso:
Implementation of a teaching unit from the standard secondary-school syllabus to secondary education for adults. Pág. 59-63. ScienceKNOW Conferences C.B.. ScienceKNOW Conferences C.B.. 2015.
Montealegre-Meléndez, Isabel;Neubauer-, Erich;Danninger-, Herbert;Mozden-,G.:
FABRICATION OF NANO-REINFORCED TITANIUM MATRIX COMPOSITES VIA POWDER METALLURGY.. Pág. 109-115. En: 1. WILEY VCH. WILEY VCH. 2009.

Participación en congresos

Montealegre-Meléndez, Isabel:
IV CONGRESO NACIONAL DE PULVIMETALURGIA. ETS de Ingenieros, Sevilla. 2012

Asistencia a congresos

García-García, Francisco José;Arévalo-Mora, Cristina;Perez-Soriano, Eva Maria;Montealegre-Meléndez, Isabel;Lozano-Suárez, Juan Gabriel:
Fabricación de cátodos para baterías de iones de litio mediante nuevas rutas sintéticas. Poster en Congreso. IX JORNADAS DE I+D+I & 1ST INTERNATIONAL WORKSHOP ON STEM. ESCUELA POLITÉCNICA SUPERIOR. 2022
Perez-Soriano, Eva Maria;Ariza-galván, Enrique;Arévalo-Mora, Cristina;Montealegre-Meléndez, Isabel;Kitzmantel, Michael;Neubauer, Erich:
Processing by Additive Manufacturing Based on Plasma Transferred Arc of Hastelloy in Air and Argon Atmosphere. Poster en Congreso. VII Jornada Investigación, Desarrollo e Innovación. Universidad de Sevilla. 2020
Montealegre-Meléndez, Isabel;Arévalo-Mora, Cristina;Ariza-galván, Enrique;Perez-Soriano, Eva Maria;Neubauer, Erich:
Desarrollo y estudio de piezas con geometrías complejas de aleaciones de titanio fabricadas a partir de polvo y alambre mediante la técnica aditiva de. Poster en Congreso. VII Jornada Investigación, Desarrollo e Innovación. Universidad de Sevilla. 2020
Ariza, Enrique;Montealegre-Meléndez, Isabel;Perez-Soriano, Eva Maria;Arévalo-Mora, Cristina;Bielik, Martin;Meuthen, John;Neubauer, Erich;Kitzmantel, Michael:
Study On Processing Nickel Alloy Hastelloy C-22 By Additive Manufacturing Technique Plasma Metal Deposition (PMD). Ponencia en Congreso. EUROPM 2020 Congress and Exhibition. ACCESO ONLINE. 2020
Ariza-galván, Enrique;Montealegre-Meléndez, Isabel;Perez-Soriano, Eva Maria;Arévalo-Mora, Cristina;Meuthen, John;Neubauer, Erich;Kitzmantel, Michael:
Processing Of 17-4PH By Additive Manufacturing Using A Plasma Metal Deposition (PMD) Technique. Poster en Congreso. EUROPM 2019. Maastricht, The Netherlands. 2019
Arévalo-Mora, Cristina;Perez-Soriano, Eva Maria;Montealegre-Meléndez, Isabel;Kitzmantel, Michael;Neubauer, Erich:
Secondary phases study in titanium matrix reinforced with TiB2. Poster en Congreso. EUROPM 2019. Maastricht, The Netherlands. 2019
Perez-Soriano, Eva Maria;Montealegre-Meléndez, Isabel;Arévalo-Mora, Cristina;Kitzmantel, Michael;Neubauer, Erich:
ESTUDIO COMPARATIVO DEL COMPORTAMIENTO DE DIFERENTES MATERIALES DE REFUERZO EN MATRICES DE TITANIO FABRICADOS POR RAPID SINTER PRESSING. Poster en Congreso. VII CONGRESO NACIONAL DE PULVIMETALURGIA, II CONGRESO IBEROAMERICANO DE PULVIMETALURGIA. Madrid, España. 2019
Montealegre-Meléndez, Isabel;Perez-Soriano, Eva Maria;Arévalo-Mora, Cristina;Kitzmantel, Michael;Neubauer, Erich:
PRELIMINARY STUDY OF THE PROCESSING PARAMETERS EFFECT ON THE MICROSTRUCTURE AND PROPERTIES OF TITANIUM GRADE 1 SPECIMENS FABRICATED VIA ADDITIVE MANUF. Ponencia en Congreso. METAL ADDITIVE MANUFACTURING CONFERENCE 2018. Viena, Austria / Vienna. 2018
Perez-Soriano, Eva Maria;Arévalo-Mora, Cristina;Montealegre-Meléndez, Isabel;Kitzmantel, Michael;Neubauer, Erich:
PRELIMINARY STUDY OF THE PROCESSING PARAMETERS EFFECT ON THE PROPERTIES OF Ti6Al4V SPECIMENS FABRICATED VIA ADDITIVE MANUFACTURING. Poster en Congreso. Euro PM2018 Congress & Exhibition. Bilbao, España. 2018
Beltrán-Custodio, Ana María;Martín-santana, Yaimi;Gonzalez-ruiz, Jesus;Trueba-Muñoz, Paloma;Montealegre-Meléndez, Isabel;Rodriguez-Ortiz, Jose Antonio;Torres-Hernández, Yadir:
Surface treatment of apatite coating deposited on titanium for biomedical applications. Poster en Congreso. XV Congreso Nacional de Materiales and I Iberian Meeting on Materials Science 2018. Salamanca, España. 2018
Martin-santana, Yaimi;González, J. E.;Trueba-Muñoz, Paloma;Montealegre-Meléndez, Isabel;Gotor-Martínez, Francisco José;Rodriguez-Ortiz, Jose Antonio;Torres-Hernández, Yadir:
SURFACE TREATMENT OF APATITE COATINGS DEPOSITED ON TITANIUM FOR BIO¿MEDICAL APPLICATIONS. Poster en Congreso. XV Congreso Nacional de Materiales and I Iberian Meeting on Materials Science 2018. Salamanca, España. 2018
Beltrán-Custodio, Ana María;Martin, Y;González-ruíz, Jesús Eduardo ;Montealegre-Meléndez, Isabel;Peón, Eduardo;González, E;Gotor-Martínez, Francisco José;Torres-Hernández, Yadir:
Effect of heat treatment of apatite coatings deposited on titanium surface modified by pre-calcification treatments.. Poster en Congreso. VII Congreso Internacional de Biomateriales . La Habana (Cuba). 2018
Montealegre-Meléndez, Isabel;Arévalo-Mora, Cristina;Perez-Soriano, Eva Maria;Neubauer, Erich;Kitzmantel, Michael:
Temperature effect on the properties of titanium matrices with 20%vol. Ti-Al, reinforced by 50% vol. of B4C. Comunicación en congreso. Euro PM2017. Milán, Italia.. 2017
Gonzalez, J.e.;Torres-Hernández, Yadir;Negrin, J;Beltrán-Custodio, Ana María;Montealegre-Meléndez, Isabel;Peón, E;Gotor-Martínez, Francisco José;Trueba-Muñoz, Paloma;Rodriguez-Ortiz, Jose Antonio;Dominguez, A:
Temperature influence on the thermo-chemical treatment of Ti6Al4V obtained by selective laser melting . Poster en Congreso. 4th International Conference on Titanium Powder Metallurgy & Additive Manufacturing. XIAN, CHINA. 2017
Gonzalez, Jesús;Torres-Hernández, Yadir;Beltrán-Custodio, Ana María;Montealegre-Meléndez, Isabel;Negrin, Jeidy;Peon, Eduardo;Gotor-Martínez, Francisco José;Trueba-Muñoz, Paloma;Rodriguez-Ortiz, Jose Antonio;Fernandez, Andrea:
Effect of the thermal treatment of Titanium samples fabricated by selective laser melting. Poster en Congreso. 4th International Conference on Titanium Powder Metallurgy & Additive Manufacturing. XIAN, CHINA. 2017
Negrin, J;González, Je;Montealegre-Meléndez, Isabel;Trueba-Muñoz, Paloma;Muñoz-Moreno, Sergio;Rodriguez-Ortiz, Jose Antonio;Torres-Hernández, Yadir:
Termo-chemical treatment of porous Ti6Al4V obtained by Selective laser Melting. Poster en Congreso. 10th International Conference on Porous Metals and Metallic Foams; Metfoam 2017. Nanjing, China.. 2017
Arévalo-Mora, Cristina;Perez-Soriano, Eva Maria;Montealegre-Meléndez, Isabel;Neubauer, E;Kitzmantel, M:
Influencia del polvo de partida en las propiedades finales de aleaciones W-Cu fabricadas mediante la técnica de rapid sinter pressing. Ponencia en Congreso. VI Congreso Nacional y I Congreso Iberoamericano de Pulvimetalurgia. Ciudad Real. 2017
Ternero-Fernández, Fátima;Rodriguez-Ortiz, Jose Antonio;Pavón-Palacio, Juan José;Montealegre-Meléndez, Isabel;Torres-Hernández, Yadir:
Improvement of the balance between a reduced stress shielding and bone ingrowth by bioactive coatings onto porous titanium substrates.. Comunicación en congreso. VI Congreso Nacional de Pulvimetalurgia y I Congreso Iberoamericano de Pulvimetalurgia. Ciudad Real. 2017
Arévalo-Mora, Cristina;Neubauer, Erich;Montealegre-Meléndez, Isabel;Perez-Soriano, Eva Maria;Kitzmantel, Michael:
Influence of the particle size and raw materials in W-Cu alloys manufactured via rapid sinter pressing. Comunicación en congreso. World PM2016. Hamburgo, Alemania. 2016
Rodriguez-Ortiz, Jose Antonio;Cristina Domínguez Trujillo;Montealegre-Meléndez, Isabel;Torres-Hernández, Yadir;Pavón-Palacio, Juan José;Arévalo-Mora, Cristina:
Coating and Infiltration of Porous Titanium with Bioactive Glass to Improve the Balance between Reduced Stress Shielding and Bone Ingrowth.. Poster en Congreso. Advances in Materials & Processing Technologies. - MADRID, ESPAÑA. 2015
Rodriguez-Ortiz, Jose Antonio;Cristina Domínguez Trujillo;Montealegre-Meléndez, Isabel;Torres-Hernández, Yadir;Pavón-Palacio, Juan José:
Coating of Porous Titanium with Bioactive Glass to Improve the Osseointegration and Reduced Stress Shielding.. Comunicación en congreso. International Congress BioBone Symposium. - Santiago de Compostela (A Coruña), España. 2015
Montealegre-Meléndez, Isabel;Arévalo-Mora, Cristina;Perez-Soriano, Eva Maria;Peña-muñoz, Ildefonso:
Approach of the Cooperative Learning method focus on students in their final year doing their degree final projects. Comunicación en congreso. International Congress of Education, Innovation and Learning Technologies (Iceilt). GRANADA SPAIN. 2015
Arévalo-Mora, Cristina;De Castro-Bernal, Vanessa;Montealegre-Meléndez, Isabel;Paúl-Escolano, Antonio:
Influence of Si and Ta content on the microstructure of reduced ferritic-martensitic steels. Poster en Congreso. European Congress and Exhibition on Advanced Materials and Process. Sevilla, . BARCELONA, . BARCELONA, ESPAÑA, España. 2013
Montealegre-Meléndez, Isabel;Arévalo-Mora, Cristina;Neubauer, E:
STUDY OF THE INFLUENCE OF STARTING POWDERS IN Ti6Al4V MATRIX COMPOSITES MATERIALS REINFORCED BY NANOPARTICLES. Comunicación en congreso. IV CONGRESO NACIONAL DE PULVIMETALURGIA. ETS de Ingenieros, Sevilla. 2012
Montealegre-Meléndez, Isabel;Arévalo-Mora, Cristina;Neubauer, E:
INFLUENCE OF HOT PRESSING TEMPERATURE IN TITANIUM SPECIMENS FABRICATED VIA POWDER METALLURGY FROM CPTi AND TiH2 POWDERS. Comunicación en congreso. IV CONGRESO NACIONAL DE PULVIMETALURGIA. ETS de Ingenieros, Sevilla. 2012
Montealegre-Meléndez, Isabel;Guerola-fuentes, María;Neubauer, Erich:
Effect of Mixing Parameters on the Final Properties of Titanium Composites Reinforced with Carbon Nanotubes. Comunicación en congreso. EUROPM 2011. Barcelona. 2011
Arévalo-Mora, Cristina;De Castro-Bernal, Vanessa;Montealegre-Meléndez, Isabel;Paúl, A:
Influence of Si content on the microstructure of reduced activation ferritic martensitic steels. Poster en Congreso. International Conference on Fusion Reactor Materials. CHARLESTON, CAROLINA DEL SUR, ESTADOS UNIDOS. 2011
Montealegre-Meléndez, Isabel;Neubauer-, Erich;Danninger-, Herbert;Mozden-,G.:
FABRICATION OF NANO-REINFORCED TITANIUM MATRIX COMPOSITES VIA POWDER METALLURGY. Ponencia en Congreso. 17. SYPOSIUM VERBUNDWERKSTOFFE UND WERKSTOFFVERBUNDE () (.2009.BAYREUTH, ALEMANIA). BAYREUTH, ALEMANIA. 2009
Montealegre-Meléndez, Isabel;Neubauer-, Erich;Angerer-,Paul;Danninger-, Herbert;Torralba-Castelló,Jose Manuel:
INFLUENCE OF NANO-REINFORCEMENTS ON THE MECHANICAL PROPERTIES AND MICROSTRUCTURE OF TITANIUM MATRIX COMPOSITES.. Ponencia en Congreso. EUROMAT 2009 () (.2009.GLASGOW, UK). GLASGOW, UK. 2009
Montealegre-Meléndez, Isabel;Neubauer-, Erich;Mozden-,G.;Danninger-, Herbert;Torralba-Castelló,Jose Manuel:
MICROSTRUCTURAL AND MECHANICAL PROPERTIES OF TITANIUM AND TITANIUM MATRIX COMPOSITES UNDER THE INFLUENCE OF RAW POWDERS AND PROCESSING CONDITIONS. Poster en Congreso. Junior Euromat 2008. LAUSANNE; SUIZA. 2008
Montealegre-Meléndez, Isabel;Neubauer-, Erich;Mozden-,G.;Danninger-, Herbert:
ESTIMATION OF AN OPTIMIZING MANUFACTURING OF TITANIUM AND TI-6AL-4V COMPOSITES VIA HOT PRESSING. Ponencia en Congreso. MATERIALS SCIENCE AND ENGINEERING () (.2008.NÜRNBERG, ALEMANIA). NÜRNBERG, ALEMANIA. 2008
Montealegre-Meléndez, Isabel;Neubauer-, Erich;Angerer-,Paul;Danninger-, Herbert:
INFLUENCE OF THE HOT PRESSING PARAMETERS ON MECHANICAL AND MICROSTRUCTURAL PROPERTIES OF TITANIUM MATRIX COMPOSITES.. Poster en Congreso. EURO PM2008 () (.2008.MANNHEIM, ALEMANIA). MANNHEIM, ALEMANIA. 2008
Serra, S. G;Rozynek-,Z.;Almansa, Ana;Schneider-,A.;Huq-,S. E.;Montealegre-Meléndez, Isabel;Castillo-Ruano,P.;Bou-,S.:
PRELIMINARY EXPERIMENTS FOR THE FABRICATION OF THERMALLY ACTUATED BIMORPH CANTILEVERARRAYS ON NON-SILICON WAFERS WITH VERTICAL INTERCONNECTS. Comunicación en congreso. 4M2007 CONFERENCE ON MULTI-MATERIAL MICROMANUFACTURE (3) (3.2007.BOROVETS; BULGARIA). BOROVETS; BULGARIA. 2007
Montealegre-Meléndez, Isabel;Neubauer-, Erich;Angerer-,Paul:
SINTERING BEHAVIOR AND PROPERTIES OF TITANIUM METAL MATRIX COMPOSITES. Poster en Congreso. EUROMAT 2007 () (.2007.NÜRRNBERG, ALEMANIA). NÜRRNBERG, ALEMANIA. 2007
Montealegre-Meléndez, Isabel:
Asistencia. Conferencia Congreso no publicada. I Congreso Español de Pulvimetalurgia. CARLOS II, LEGANÉS, ESPAÑA. 2006
Montealegre-Meléndez, Isabel:
Ponencia. Comunicación en congreso. . .
Montealegre-Meléndez, Isabel:
Asistencia. Conferencia Congreso no publicada. . .

Artículos publicados

Ariza-galván, Enrique;Montealegre-Meléndez, Isabel;Perez-Soriano, Eva Maria;Neubauer, Erich;Kitzmantel, Michael;Arévalo-Mora, Cristina:
Influence of Processing Conditions on the Mechanical Properties of 17-4PH Specimens Produced by Additive Manufacturing. Machines: Machinery and Automation. 2022. Vol: 10. Núm: 11. 10.3390/machines10110976.
Perez-Soriano, Eva Maria;Ariza, Enrique;Arévalo-Mora, Cristina;Montealegre-Meléndez, Isabel;Kitzmantel, Michael;Neubauer, Erich:
Processing by Additive Manufacturing Based on Plasma Transferred Arc of Hastelloy in Air and Argon Atmosphere. Metals. 2020. Vol: 10. Núm: 2. 10.3390/met10020200.
Perez-Soriano, Eva Maria;Arévalo-Mora, Cristina;Montealegre-Meléndez, Isabel;Neubauer, Erich;Kitzmantel, Michael:
Influence of starting powders on the final properties of W-Cu alloys manufactured through rapid sinter pressing technique. Powder Metallurgy. 2020. Vol: 64. Pág. 75-81. 10.1080/00325899.2020.1847847.
Arévalo-Mora, Cristina;Ariza, Enrique;Perez-Soriano, Eva Maria;Kitzmantel, Michael;Neubauer, Erich;Montealegre-Meléndez, Isabel:
Effect of Processing Atmosphere and Secondary Operations on the Mechanical Properties of Additive Manufactured AISI 316L Stainless Steel by Plasma Met. Metals. 2020. Vol: 10. 10.3390/met10091125.
Montealegre-Meléndez, Isabel;Arévalo-Mora, Cristina;Beltrán-Custodio, Ana María;Kitzmantel, M;Neubauer, E;Perez-Soriano, Eva Maria:
Reaction Layer Analysis of In Situ Reinforced Titanium Composites: Influence of the Starting Material Composition on the Mechanical Properties. Metals. 2020. Vol: 10. Núm: 2. doi:10.3390/met10020265.
Arévalo-Mora, Cristina;Montalegre, Isabel;Montealegre-Meléndez, Isabel;Perez-Soriano, Eva Maria;Kitzmantel, Michael;Neubauer, Erik:
Electron microscopy characterization of the reaction layer in titanium composites reinforced with B4C particles and the effect of the presence of alum. Materials Research Express. 2019. Vol: 6. https://doi.org/10.1088/2053-1591/ab450e.
Arévalo-Mora, Cristina;Montealegre-Meléndez, Isabel;Neubauer, Erich;Perez-Soriano, Eva Maria;Kitzmantel, Michael:
Powder-materials impact on nanoparticle-reinforced Ti-6Al-4V matrix composites produced via inductive hot pressing. International Journal of Materials and Product Technology. 2018. Vol: 56. Núm: 3. Pág. 207-219.
Cristina Domínguez Trujillo;Ternero-Fernández, Fátima;Rodriguez-Ortiz, Jose Antonio;Pavón-Palacio, Juan José;Montealegre-Meléndez, Isabel;Arévalo-Mora, Cristina;García-Moreno, Francisco Antonio;Torres-Hernández, Yadir:
Improvement of the balance between a reduced stress shielding and bone ingrowth by bioactive coatings onto porous titanium substrates.. Surface and Coatings Technology. 2018. Vol: 338. Pág. 32-37. 10.1016/j.surfcoat.2018.01.019.
Montealegre-Meléndez, Isabel;Arévalo-Mora, Cristina;Perez-Soriano, Eva Maria;Kitzmantel, Michael;Neubauer, Erich:
Microstructural and XRD Analysis and Study of the Properties of the System Ti-TiAl-B4C Processed under Different Operational Conditions. Metals. 2018. Vol: 8. Núm: 5. 10.3390/met8050367.
Arévalo-Mora, Cristina;Montealegre-Meléndez, Isabel;Perez-Soriano, Eva Maria;Ariza, Enrique;Kitzmantel, Michael;Neubauer, Erich:
Study of the Influence of TiB Content and Temperature in the Properties of In Situ Titanium Matrix Composites. Metals. 2017. Vol: 7. Núm: 11. Pág. 1-13. 10.3390/met7110457.
Arévalo-Mora, Cristina;Ariza, Enrique;Montealegre-Meléndez, Isabel;Kitzmantel, Michael;Neubauer, Erich:
Ti/B4C Composites Prepared by In Situ Reaction Using Inductive Hot Pressing. Key Engineering Materials. 2017. Vol: 742. Pág. 121-128. 10.4028/www.scientific.net/KEM.742.121.
Montealegre-Meléndez, Isabel;Arévalo-Mora, Cristina;Perez-Soriano, Eva Maria;Neubauer, Erich;Rubio-Escudero, Cristina;Kitzmantel, Michael:
Analysis of the Influence of Starting Materials and Processing Conditions on the Properties of W/Cu Alloys. Materials. 2017. Vol: 10. Núm: 142. Pág. 1-11. doi:10.3390/ma10020142.
Montealegre-Meléndez, Isabel;Arévalo-Mora, Cristina;Ariza, Enrique;Perez-Soriano, Eva Maria;Rubio-Escudero, Cristina;Kitzmantel, Michael;Neubauer, Erich:
Analysis of the Microstructure and Mechanical Properties of Titanium-Based Composites Reinforced by Secondary Phases and B4C Particles Produced via Di. Materials. 2017. Vol: 10. Núm: 11. 10.3390/ma10111240.
Arévalo-Mora, Cristina;Kitzmantel, Michael;Neubauer, Erich;Montealegre-Meléndez, Isabel:
Development of Ti-MMCs by the use of different reinforcements via conventional Hot-Pressing. Key Engineering Materials. 2016. Vol: 704. Pág. 400-405. 10.4028/www.scientific.net/KEM.704.400.
Montealegre-Meléndez, Isabel;Neubauer, Erich;Arévalo-Mora, Cristina;Rovira, Ana;Kitzmantel, Michael:
Study of Titanium Metal Matrix Composites Reinforced by Boron Carbides and Amorphous Boron Particles Produced via Direct Hot Pressing. Key Engineering Materials. 2016. Vol: 704. Pág. 85-93. 10.4028/www.scientific.net/KEM.704.85.
Neubauer, Erich;Vály, L;Kitzmantel, Michael;Grech, D;Rovira-ortega, Ana;Montealegre-Meléndez, Isabel;Arévalo-Mora, Cristina:
Titanium Matrix Composites with High Specific Stiffness. Key Engineering Materials. 2016. Vol: 704. Pág. 38-43. 10.4028/www.scientific.net/KEM.704.38.
Arévalo-Mora, Cristina;Montealegre-Meléndez, Isabel; Ariza, Enrique;Kitzmantel, Michael;Rubio-Escudero, Cristina;Neubauer, Erich:
Influence of Sintering Temperature on the Microstructure and Mechanical Properties of In Situ Reinforced Titanium Composites by Inductive Hot Pressing. Materials. 2016. Vol: 9. Núm: 11. 10.3390/ma9110919.
Rodriguez-Ortiz, Jose Antonio;Torres-Hernández, Yadir;Trueba-Muñoz, Paloma;Pavón-Palacio, Juan José;Montealegre-Meléndez, Isabel:
Designing, processing and characterisation of titanium cylinders with graded porosity: An alternative to stress-shielding solutions. . Materials & Design. 2014. Vol: 63. Pág. 316-324.
Bolzoni , Leandro;Montealegre-Meléndez, Isabel:
Microstructural evolution and mechanical properties of the Ti6Al4V alloy produced by vacuum hot-pressing. Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing. 2012. Vol: 546. Pág. 189-197. http://dx.doi.org/10.1016/j.msea.2012.03.050,.
Montealegre-Meléndez, Isabel;Neubauer-, Erich;Agerer-,Paul;Danninger-, Herbert;Torralba-Castelló,Jose Manuel:
INFLUENCE OF NANO-REINFORCEMENTS ON THE MECHANICAL PROPERTIES AND MICROSTRUCTURE OF TITANIUM MATRIX COMPOSITES. Composites Science and Technology. 2011. Vol: 71. Pág. 1154-1162.
Montealegre-Meléndez, Isabel;Neubauer-, Erich;Danninger-, Herbert:
CONSOLIDATION OF TITANIUM MATRIX COMPOSITES TO MAXIMUM DENSITY BY DIFFERENT HOT PRESSING TECHNIQUES. Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing. 2010. Pág. 4466-4473.
Montealegre-Meléndez, Isabel;Neubauer-, Erich;Danninger-, Herbert:
EFFECT OF STARTING POWDER GRADE ON SINTERING AND PROPERTIES OF PM TITANIUM METAL MATRIX COMPOSITES. Powder Metallurgy. 2009. Pág. 322-328.