Directorio
GABRIEL CENTENO BAEZ
Categoría
Catedrático de Universidad
Departamento
Área
Ingeniería de los Procesos de Fabricación
Docencia
Asignaturas que imparte
- Procesos de Fabricación Aeronáutica
- Sistemas Integrados de Fabricación
- Sistemas Integrados de Fabricación
- Sistemas Integrados de Fabricación
- Sistemas Integrados de Fabricación
- Sistemas Integrados de Fabricación
- Sistemas Integrados de Fabricación
- Sistemas Integrados de Fabricación
- Sistemas Integrados de Fabricación
Investigación
Grupo de investigación
INGENIERIA MECANICA (INGENIERIA MECANICA)
Proyectos y contratos de investigación
TRANSMISIONES CONTINUAS VARIABLES AUTOADAPTABLES DINÁMICAMENTE (TRA2006-15070-C02-01 - Investigador/a)
ANÁLISIS DEL EFECTO COMBINADO TRACCIÓN-FLEXIÓN EN PROCESOS DE CONFORMADO DE CHAPA METÁLICA.DPI2009-13335 (DPI2009-13335 - Investigador/a)
Jigless Techniques & Flexible Tooling for Assembly Applications (NEBULA+) (PI-1842/20/2018 - Investigador/a)
Nébula - Nueva generación de sistemas de ensamblaje flexibles ultraligeros (Feder Innterconecta - MC2) (PI-1602/20/2016 - Investigador/a)
Nuevos Desarrolos Industriales de Tecnologías de Conformado de Chapa Metálica (PI-1792/20/2018 - Investigador/a)
Digital Manufacturing and Virtual factory in the Aeronautical Industry using 3DExperience (PI-1753/20/2017 - Investigador/a)
Nébula - Nueva generación de sistemas de ensamblaje flexibles ultraligeros (Feder Innterconecta - AIRBUS DS) (PI-1601/20/2016 - Investigador/a)
Digital Manufacturing and Virtual Factory in the Aeronautical Industry using 3DExperience (PI-1753/20/2017 - Investigador/a)
Nébula - Nueva generación de sistemas de ensamblaje flexibles ultraligeros (Feder Innterconecta - MC2) (PI-1602/20/2016 - Investigador/a)
Nébula - Nueva generación de sistemas de ensamblaje flexibles ultraligeros (Feder Innterconecta - AIRBUS DS) (PI-1601/20/2016 - Investigador/a)
Value Chain: From IDMU to LEAN documentation for assembly (ARIADNE) (PI-1498/20/2016 - Investigador/a)
Estudio de Materiales y Dimensonamiento para la Fabricación de una Unidad de Recuperación y Neutralización de Vapores (2691/0813 - Responsable)
Desarrollo de un nuevo método de realización de puntos de conexión a masa y retorno de corriente (AMASA) (PI-1212/20/2013 - Investigador/a)
Desarrollo e Investigación de Nuevas Tecnologías para la Automatización de los Procesos de Montaje Aeronáutico (PI-1035/2012 - Investigador/a)
Desarrollo e Investigación de Nuevas Tecnologías para la Automatización de los Procesos de Montaje Aeronáutico (PI-1033/2012 - Investigador/a)
Proceso de Conformado Incremental para el Rebordeado de Chapas de Aluminio de Ductilidad Reducida y Láminas Poliméricas: Mejora de la Conformabilidad (DPI2015-64047-R - Responsable)
Análisis del Proceso de Conformado Incremental Mono-Punto de Chapa y su Aplicación al Rebordeado de Agujeros (Hole Flanging) (DPI2012-32913 - Investigador/a)
Desarrollo e Investigación de Nuevas Tecnologías para la Automatización de los Procesos de Montaje Aeronáutico (PI-1033/2012 - Investigador/a)
Desarrollo de un nuevo método de realización de puntos de conexión a masa y retorno de corriente (AMASA) (PI-1212/20/2013 - Investigador/a)
Análisis del Proceso de Conformado Incremental Mono-Punto de Chapa y su Aplicación al Rebordeado de Agujeros (Hole Flanging) (DPI2012-32913 - Investigador/a)
Capítulos en Libros
Bagudanch, Isabel;G. Centeno;Vallellano-Martin, Carpoforo;García-romeu, María Luisa:
Towards the Manufacturing of Near Net Shape Medical Prostheses in Polymeric Sheet by Incremental Sheet Forming. Pág. 1-33. Springer. Springer. 2019.
Towards the Manufacturing of Near Net Shape Medical Prostheses in Polymeric Sheet by Incremental Sheet Forming. Pág. 1-33. Springer. Springer. 2019.
González-pérez-somarriba, Borja;G. Centeno;Vallellano-Martin, Carpoforo;Gonzalez-Perez, Luis Miguel:
Complications following Total TemporoMandibular Joint Prosthetic Replacement. Pág. 1-13. Open Acces eBooks. Open Acces eBooks. 2018.
Complications following Total TemporoMandibular Joint Prosthetic Replacement. Pág. 1-13. Open Acces eBooks. Open Acces eBooks. 2018.
Gonzalez-Perez, Luis Miguel;González-pérez-somarriba, Borja;G. Centeno;Vallellano-Martin, Carpoforo;Egea-Guerrero, Juan Jose:
Advanced Materials and Threedimensional Computer-aided Surgical Workflow in Cranio-maxillofacial Reconstruction. Pág. 407-434. WILEY ONLINE LIBRARY. WILEY ONLINE LIBRARY. 2016.
Advanced Materials and Threedimensional Computer-aided Surgical Workflow in Cranio-maxillofacial Reconstruction. Pág. 407-434. WILEY ONLINE LIBRARY. WILEY ONLINE LIBRARY. 2016.
G. Centeno;Martínez-Donaire, Andrés Jesús;Morales-Palma, Domingo;Vallellano-Martin, Carpoforo;Silva, M. Beatriz;Martins, Paulo A. F.:
Novel experimental techniques for the determination of the forming limits at necking and fracture. Pág. 1-24. Woodhead/Elsevier. Woodhead/Elsevier. 2015.
Novel experimental techniques for the determination of the forming limits at necking and fracture. Pág. 1-24. Woodhead/Elsevier. Woodhead/Elsevier. 2015.
Asistencia a congresos
Rosa-sainz, Ana;G. Centeno;Silva, Beatriz;Vallellano-Martin, Carpoforo:
On the assessment of the failure strains in conventional and incremental forming of polymer sheets. Poster en Congreso. 10th Manufacturing Engineering Society International Conference. ESCUELA TECNICA SUPERIOR DE INGENIERIA DE SEVILLA. 2023
On the assessment of the failure strains in conventional and incremental forming of polymer sheets. Poster en Congreso. 10th Manufacturing Engineering Society International Conference. ESCUELA TECNICA SUPERIOR DE INGENIERIA DE SEVILLA. 2023
Rosa-sainz, Ana;Ferrer, Ines;Garcia Romeu, Maria Luisa;Silva, Beatriz;G. Centeno:
On the manufacturing of a cranial PEEK implant using SPIF . Ponencia en Congreso. 10th Manufacturing Engineering Society International Conference. ESCUELA TECNICA SUPERIOR DE INGENIERIA DE SEVILLA. 2023
On the manufacturing of a cranial PEEK implant using SPIF . Ponencia en Congreso. 10th Manufacturing Engineering Society International Conference. ESCUELA TECNICA SUPERIOR DE INGENIERIA DE SEVILLA. 2023
Suntaxi, Carlos;G. Centeno;Rosa-sainz, Ana;Morales-Palma, Domingo;Vallellano-Martin, Carpoforo:
Numerical Modelling of Conventional and Incremental Forming of Thin-Walled Tube. Ponencia en Congreso. 25th International Conference on Material Forming. BRAGA PORTUGAL. 2022
Numerical Modelling of Conventional and Incremental Forming of Thin-Walled Tube. Ponencia en Congreso. 25th International Conference on Material Forming. BRAGA PORTUGAL. 2022
Garcia Romeu, Maria Luisa;Ferrer, Ines;Pasotti, C;Coma, Joan;Rosa-sainz, Ana;G. Centeno:
Preliminary study on the use of 3D printed biodegradable polymeric sheet for the manufacturing of medical prostheses by SPIF. Ponencia en Congreso. V CIRP Conference on Biomanufacturing. CALABRIA. 2022
Preliminary study on the use of 3D printed biodegradable polymeric sheet for the manufacturing of medical prostheses by SPIF. Ponencia en Congreso. V CIRP Conference on Biomanufacturing. CALABRIA. 2022
Rosa-sainz, Ana;Magrinho, Joao;Silva, Beatriz;G. Centeno;Martínez-Donaire, Andrés Jesús;Vallellano-Martin, Carpoforo:
Experimental research of formability limits in different thicknesses of polycarbonate sheets. Ponencia en Congreso. International Deep-Drawing Research Group Conference . STUGGART, ALEMANIA. 2021
Experimental research of formability limits in different thicknesses of polycarbonate sheets. Ponencia en Congreso. International Deep-Drawing Research Group Conference . STUGGART, ALEMANIA. 2021
Flores, G.;Palomo, David;Martínez-Donaire, Andrés Jesús;Borrego, Marcos;López-fernández, José Andrés;Morales-Palma, Domingo;G. Centeno;Vallellano-Martin, Carpoforo:
Design for FDM of flexible tooling for manufacturing aeronautical components by incremental sheet forming. Ponencia en Congreso. 9th Manufacturing Engineering Society International Conference. Gijón, Spain. 2021
Design for FDM of flexible tooling for manufacturing aeronautical components by incremental sheet forming. Ponencia en Congreso. 9th Manufacturing Engineering Society International Conference. Gijón, Spain. 2021
Morales-Palma, Domingo;Borrego, Marcos;López-fernández, José Andrés;Martínez-Donaire, Andrés Jesús;G. Centeno;Vallellano-Martin, Carpoforo:
Numerical analysis of necking in stretch-bending based on modified maximum force criteria. Poster en Congreso. 9th Manufacturing Engineering Society International Conference. Gijón, Spain. 2021
Numerical analysis of necking in stretch-bending based on modified maximum force criteria. Poster en Congreso. 9th Manufacturing Engineering Society International Conference. Gijón, Spain. 2021
Borrego, Marcos;Morales-Palma, Domingo;López-fernández, José Andrés;Martínez-Donaire, Andrés Jesús;G. Centeno;Vallellano-Martin, Carpoforo:
Revisiting flangeability in hole-flanging by single-stage incremental forming and conventional process. Ponencia en Congreso. 24th International Conference on Material Forming. Liège, Belgium. 2021
Revisiting flangeability in hole-flanging by single-stage incremental forming and conventional process. Ponencia en Congreso. 24th International Conference on Material Forming. Liège, Belgium. 2021
Borrego, Marcos;Morales-Palma, Domingo;López-fernández, José Andrés;Martínez-Donaire, Andrés Jesús;G. Centeno;Vallellano-Martin, Carpoforo:
Hole-flanging of AA7075-O sheets: conventional process versus SPIF. Ponencia en Congreso. The 18th International Conference on Metal Forming 2020. Krakow, Poland. 2020
Hole-flanging of AA7075-O sheets: conventional process versus SPIF. Ponencia en Congreso. The 18th International Conference on Metal Forming 2020. Krakow, Poland. 2020
Rosa-sainz, Ana;G. Centeno;Silva, Beatriz;Vaz, Fatima;Vallellano-Martin, Carpoforo:
On the assessment of formability and failure of polycarbonate sheet deformed by single point incremental forming. Poster en Congreso. Manufacturing Engenieering Society International Conference . GIJON , ESPAÑA. 2020
On the assessment of formability and failure of polycarbonate sheet deformed by single point incremental forming. Poster en Congreso. Manufacturing Engenieering Society International Conference . GIJON , ESPAÑA. 2020
López-fernández, José A.;G. Centeno;Borrego, Marcos;Martínez-Donaire, Andrés Jesús;Morales-Palma, Domingo;Vallellano-Martin, Carpoforo:
Numerical study of formability and failure prediction in shrink and stretch flanging by SPIF. Ponencia en Congreso. The 13th International Conference on Numerical Methods in Industrial Forming Processes. Portsmouth, New Hampshire, USA. 2019
Numerical study of formability and failure prediction in shrink and stretch flanging by SPIF. Ponencia en Congreso. The 13th International Conference on Numerical Methods in Industrial Forming Processes. Portsmouth, New Hampshire, USA. 2019
Martínez-Donaire, Andrés Jesús;Morales-Palma, Domingo;Borrego, Marcos;López_fernández, José A.;G. Centeno;Vallellano-Martin, Carpoforo:
Analysis of stress triaxiality on the formability of hole-flanged parts by SPIF. Ponencia en Congreso. The 13th International Conference on Numerical Methods in Industrial Forming Processes. Portsmouth, New Hampshire, USA. 2019
Analysis of stress triaxiality on the formability of hole-flanged parts by SPIF. Ponencia en Congreso. The 13th International Conference on Numerical Methods in Industrial Forming Processes. Portsmouth, New Hampshire, USA. 2019
Morales-Palma, Domingo;Borrego, Marcos;Martínez-Donaire, Andrés Jesús;G. Centeno;Vallellano-Martin, Carpoforo:
Numerical study on the thickness homogenization in hole-flanging by single-point incremental forming. Ponencia en Congreso. The 11th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes. Tokyo, Japan. 2018
Numerical study on the thickness homogenization in hole-flanging by single-point incremental forming. Ponencia en Congreso. The 11th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes. Tokyo, Japan. 2018
Martínez-Donaire, Andrés Jesús;Borrego, Marcos;Morales-Palma, Domingo;G. Centeno;Vallellano-Martin, Carpoforo:
Hole Expansion of A High Strength Steel Sheet. Comunicación en congreso. The 11th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes. Tokyo, Japan. 2018
Hole Expansion of A High Strength Steel Sheet. Comunicación en congreso. The 11th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes. Tokyo, Japan. 2018
G. Centeno;Martínez-Donaire, Andrés Jesús;Morales-Palma, Domingo;Vallellano-Martin, Carpoforo:
Experimental and numerical analysis of the flanging process by SPIF. Ponencia en Congreso. The 11th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes. Tokyo, Japan. 2018
Experimental and numerical analysis of the flanging process by SPIF. Ponencia en Congreso. The 11th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes. Tokyo, Japan. 2018
Martínez-Donaire, Andrés Jesús;Morales-Palma, Domingo;Borrego, Marcos;G. Centeno;Vallellano-Martin, Carpoforo:
On the effect of stress state on the failure limits of hole- flanged parts formed by SPIF. Ponencia en Congreso. The 11th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes. Tokyo, Japan. 2018
On the effect of stress state on the failure limits of hole- flanged parts formed by SPIF. Ponencia en Congreso. The 11th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes. Tokyo, Japan. 2018
Morales-Palma, Domingo;Borrego, Marcos;Martínez-Donaire, Andrés Jesús;G. Centeno;Vallellano-Martin, Carpoforo:
Preliminary investigation on homogenization of the thickness distribution in hole-flanging by SPIF. Ponencia en Congreso. 7th Manufacturing Engineering Society International Conference. Vigo (España). 2017
Preliminary investigation on homogenization of the thickness distribution in hole-flanging by SPIF. Ponencia en Congreso. 7th Manufacturing Engineering Society International Conference. Vigo (España). 2017
Martínez-Donaire, Andrés Jesús;Morales-Palma, Domingo;Borrego, Marcos;G. Centeno;Vallellano-Martin, Carpoforo:
Numerical Explicit Analysis of Hole Flanging by Single-Stage Incremental Forming. Ponencia en Congreso. 7th Manufacturing Engineering Society International Conference. Vigo (España). 2017
Numerical Explicit Analysis of Hole Flanging by Single-Stage Incremental Forming. Ponencia en Congreso. 7th Manufacturing Engineering Society International Conference. Vigo (España). 2017
Serrano-González, Javier;Barragán-Villarejo, Manuel;García-lópez, Francisco De Paula;Marano-Marcolini, Alejandro;G. Centeno;Alvarado-Barrios, Lázaro:
Multidisciplinary Learning in Master's Dissertations on Wind Energy Integration in Microgrids and Electricity Markets. Comunicación en congreso. V Congreso Internacional de Docencia Universitaria. Vigo. 2017
Multidisciplinary Learning in Master's Dissertations on Wind Energy Integration in Microgrids and Electricity Markets. Comunicación en congreso. V Congreso Internacional de Docencia Universitaria. Vigo. 2017
G. Centeno;Bagudanch, Isabel;Morales-Palma, Domingo;García-romeu, María Luisa;González-pérez-somarriba, Borja;Martínez-Donaire, Andrés Jesús;Gonzalez-Perez, Luis Miguel;Vallellano-Martin, Carpoforo:
Recent approaches for the manufacturing of polymeric cranial prostheses by incremental sheet forming. Ponencia en Congreso. 17th International Conference on Sheet Metal. Palermo (Italia). 2017
Recent approaches for the manufacturing of polymeric cranial prostheses by incremental sheet forming. Ponencia en Congreso. 17th International Conference on Sheet Metal. Palermo (Italia). 2017
Morales-Palma, Domingo;Martínez-Donaire, Andrés Jesús;G. Centeno;Borrego, Marcos;Vallellano-Martin, Carpoforo:
Experiencia docente de simulación de procesos de fabricación en máquinas de control numérico. Comunicación en congreso. 24 Congreso de Innovación Educativa en las Enseñanzas Técnicas (2016). Cádiz, España. 2016
Experiencia docente de simulación de procesos de fabricación en máquinas de control numérico. Comunicación en congreso. 24 Congreso de Innovación Educativa en las Enseñanzas Técnicas (2016). Cádiz, España. 2016
Vallellano-Martin, Carpoforo;Morales-Palma, Domingo;G. Centeno;Borrego, Marcos:
Teaching & learning of sheet metal forming processes using DEFORM-3D. Ponencia en Congreso. 24th University Educational Innovation Congress on Technical Education. Cadiz. 2016
Teaching & learning of sheet metal forming processes using DEFORM-3D. Ponencia en Congreso. 24th University Educational Innovation Congress on Technical Education. Cadiz. 2016
Martínez-Donaire, Andrés Jesús;Morales-Palma, Domingo;G. Centeno;Borrego, Marcos;Vallellano-Martin, Carpoforo:
Enseñanza-Aprendizaje de Procesos de Conformado de Chapa Mediante DEFORM-3D. Ponencia en Congreso. 24 Congreso de Innovación Educativa en las Enseñanzas Técnicas (2016). Cádiz, España. 2016
Enseñanza-Aprendizaje de Procesos de Conformado de Chapa Mediante DEFORM-3D. Ponencia en Congreso. 24 Congreso de Innovación Educativa en las Enseñanzas Técnicas (2016). Cádiz, España. 2016
Vallellano-Martin, Carpoforo;Morales-Palma, Domingo;G. Centeno;Borrego, Marcos:
Teaching and learning of manufacturing engineering through virtualization of processes on CNC machines. Ponencia en Congreso. 24th University Educational Innovation Congress on Technical Education. Cadiz. 2016
Teaching and learning of manufacturing engineering through virtualization of processes on CNC machines. Ponencia en Congreso. 24th University Educational Innovation Congress on Technical Education. Cadiz. 2016
Morales-Palma, Domingo;Martínez-Donaire, Andrés Jesús;G. Centeno;Vallellano-Martin, Carpoforo:
Teaching experience for the virtualization of machine tools and simulation of manufacturing operations. Comunicación en congreso. 22nd Symposium on New Frontiers in Materials Processing and Manufacturing Engineering Training and Learning. ALMADÉN (CIUDAD REAL). 2016
Teaching experience for the virtualization of machine tools and simulation of manufacturing operations. Comunicación en congreso. 22nd Symposium on New Frontiers in Materials Processing and Manufacturing Engineering Training and Learning. ALMADÉN (CIUDAD REAL). 2016
G. Centeno;Martínez-Donaire, Andrés Jesús;Morales-Palma, Domingo;Borrego, Marcos;Vallellano-Martin, Carpoforo:
Multidisciplinary learning of manufacturing engineering through bachelor and master theses in incremental sheet forming. Comunicación en congreso. 22nd Symposium on New Frontiers in Materials Processing and Manufacturing Engineering Training and Learning. ALMADÉN (CIUDAD REAL). 2016
Multidisciplinary learning of manufacturing engineering through bachelor and master theses in incremental sheet forming. Comunicación en congreso. 22nd Symposium on New Frontiers in Materials Processing and Manufacturing Engineering Training and Learning. ALMADÉN (CIUDAD REAL). 2016
G. Centeno;Morales-Palma, Domingo;Martínez-Donaire, Andrés Jesús;Borrego, Marcos;Vallellano-Martin, Carpoforo:
A numerical study of the stress/strain evolution in single-point incremental forming of AA2024-T3 sheets. Comunicación en congreso. Advances in Materials & Processing Technologies. Leganés (Madrid), España. 2015
A numerical study of the stress/strain evolution in single-point incremental forming of AA2024-T3 sheets. Comunicación en congreso. Advances in Materials & Processing Technologies. Leganés (Madrid), España. 2015
Silva, Maria Beatriz;Martínez-Donaire, Andrés Jesús;G. Centeno;Morales-Palma, Domingo;Vallellano-Martin, Carpoforo;Firmé-martins, Paulo Antonio:
Forming limits by necking and fracture in sheet metal forming. Comunicación en congreso. 6th Manufacturing Engineering Society International Conference. Barcelona (España). 2015
Forming limits by necking and fracture in sheet metal forming. Comunicación en congreso. 6th Manufacturing Engineering Society International Conference. Barcelona (España). 2015
Borrego, Marcos;Morales-Palma, Domingo;Martínez-Donaire, Andrés Jesús;G. Centeno;Vallellano-Martin, Carpoforo:
On the study of the single-stage hole flanging process by SPIF. Ponencia en Congreso. 6th Manufacturing Engineering Society International Conference. Barcelona (Spain). 2015
On the study of the single-stage hole flanging process by SPIF. Ponencia en Congreso. 6th Manufacturing Engineering Society International Conference. Barcelona (Spain). 2015
Silva, María Beatriz;Martínez-Donaire, Andrés Jesús;G. Centeno;Vallellano-Martin, Carpoforo:
Recent Approaches for the Determination of Forming Limits by Necking and Fracture in Sheet Metal Forming. Comunicación en congreso. 6th Manufacturing Engineering Society International Conference. Barcelona (España). 2015
Recent Approaches for the Determination of Forming Limits by Necking and Fracture in Sheet Metal Forming. Comunicación en congreso. 6th Manufacturing Engineering Society International Conference. Barcelona (España). 2015
Morales-Palma, Domingo;Martínez-Donaire, Andrés Jesús;G. Centeno;Vallellano-Martin, Carpoforo:
Experiencia docente de fabricación en máquinas de control numérico. Ponencia en Congreso. 22 Congreso de Innovación Educativa en las Enseñanzas Técnicas. ALMADÉN (CIUDAD REAL). 2014
Experiencia docente de fabricación en máquinas de control numérico. Ponencia en Congreso. 22 Congreso de Innovación Educativa en las Enseñanzas Técnicas. ALMADÉN (CIUDAD REAL). 2014
G. Centeno;Martínez-Donaire, Andrés Jesús;Morales-Palma, Domingo;Borrego, Marcos;Vallellano-Martin, Carpoforo:
Aprendizaje Multidisciplinar de Tecnologías de Fabricación en Trabajos de Fin de Estudios en el Ámbito de los Procesos de Conformado Incremental. Ponencia en Congreso. 22 Congreso de Innovación Educativa en las Enseñanzas Técnicas. ALMADÉN (CIUDAD REAL). 2014
Aprendizaje Multidisciplinar de Tecnologías de Fabricación en Trabajos de Fin de Estudios en el Ámbito de los Procesos de Conformado Incremental. Ponencia en Congreso. 22 Congreso de Innovación Educativa en las Enseñanzas Técnicas. ALMADÉN (CIUDAD REAL). 2014
G. Centeno;Martínez-Donaire, Andrés Jesús;Vallellano-Martin, Carpoforo;Martínez-palmeth, Luis Humberto;Morales-Palma, Domingo;Suntaxi, Carlos;Garcia-Lomas-Jung, Francisco Javier:
Experimental Study on the Evaluation of Necking and Fracture Strains in Sheet Metal Forming Processes. Ponencia en Congreso. 5th Manufacturing Engineering Society International Conference. Zaragoza, España. 2013
Experimental Study on the Evaluation of Necking and Fracture Strains in Sheet Metal Forming Processes. Ponencia en Congreso. 5th Manufacturing Engineering Society International Conference. Zaragoza, España. 2013
Bagudanch, Isabel;G. Centeno;Vallellano-Martin, Carpoforo;García-romeu, M.l.:
Forming force in Single Point Incremental Forming under different bending conditions . Comunicación en congreso. Fith Manufacturing Engineering Society International Conference. Zaragoza. 2013
Forming force in Single Point Incremental Forming under different bending conditions . Comunicación en congreso. Fith Manufacturing Engineering Society International Conference. Zaragoza. 2013
Martínez-palmeth, Luis Humberto;Martínez-Donaire, Andrés Jesús;Vallellano-Martin, Carpoforo;G. Centeno;Garcia-Lomas-Jung, Francisco Javier:
Formability of Automotive H240LA Steel Sheets in Stretch Bending. Ponencia en Congreso. Manufacturing Engineering Society International Conference, 5th MESIC 2013. Zaragoza (Spain). 2013
Formability of Automotive H240LA Steel Sheets in Stretch Bending. Ponencia en Congreso. Manufacturing Engineering Society International Conference, 5th MESIC 2013. Zaragoza (Spain). 2013
G. Centeno;Bagudanch, Isabel;García-romeu, M. Luisa;Vallellano-Martin, Carpoforo;Martínez-Donaire, Andrés Jesús:
Experimental Study on the Overall Spifability of AISI 304 Sheets under Different Bending Conditions. Ponencia en Congreso. The 16th International Esaform Conference On Material Forming. AVEIRO (PORTUGAL). 2013
Experimental Study on the Overall Spifability of AISI 304 Sheets under Different Bending Conditions. Ponencia en Congreso. The 16th International Esaform Conference On Material Forming. AVEIRO (PORTUGAL). 2013
Martínez-palmeth, Luis Humberto;Martínez-Donaire, Andrés Jesús;Vallellano-Martin, Carpoforo;G. Centeno;Garcia-Lomas-Jung, Francisco Javier:
Experimental Study of the Formability of H240LA Steel Sheets Under Stretch-bending Conditions. Ponencia en Congreso. International Conference on Sheet Metal, SheMet 13. BELFAST, NORTHERN IRELAND. 2013
Experimental Study of the Formability of H240LA Steel Sheets Under Stretch-bending Conditions. Ponencia en Congreso. International Conference on Sheet Metal, SheMet 13. BELFAST, NORTHERN IRELAND. 2013
Morales-Palma, Domingo;Vallellano-Martin, Carpoforo;Martínez-Donaire, Andrés Jesús;G. Centeno;Garcia-Lomas-Jung, Francisco Javier:
INFLUENCE OF PUNCH RADIUS ON THE FORMABILITY OF AA7075-O SHEETS. Ponencia en Congreso. THE 14TH INTERNATIONAL CONFERENCE ON METAL FORMING. CRACOVIA, POLONIA. 2012
INFLUENCE OF PUNCH RADIUS ON THE FORMABILITY OF AA7075-O SHEETS. Ponencia en Congreso. THE 14TH INTERNATIONAL CONFERENCE ON METAL FORMING. CRACOVIA, POLONIA. 2012
Vallellano-Martin, Carpoforo;G. Centeno;Martínez-Donaire, Andrés Jesús;Doblas-Charneco, Francisco Javier;Estevez-Urra, Aida;Garcia-Lomas-Jung, Francisco Javier:
Experiencia docente en procesos de conformado plástico mediante casos prácticos. Poster en Congreso. XX Congreso Universitario de Innovación Educativa en las Enseñanzas Técnicas. LAS PALMAS DE GRAN CANARIA, ESPAÑA. 2012
Experiencia docente en procesos de conformado plástico mediante casos prácticos. Poster en Congreso. XX Congreso Universitario de Innovación Educativa en las Enseñanzas Técnicas. LAS PALMAS DE GRAN CANARIA, ESPAÑA. 2012
G. Centeno;Vallellano-Martin, Carpoforo;Doblas-Charneco, Francisco Javier;Martínez-Donaire, Andrés Jesús;Estévez, Antonio;Garcia-Lomas-Jung, Francisco Javier:
Self-evaluation e-learning system for manufacturing engineering subjects. Comunicación en congreso. 3rd Especial Symposium on New Frontiers in Manufacturing Engineering and Materials Processing Training and Learning. Las Palmas de Gran Canaria. 2012
Self-evaluation e-learning system for manufacturing engineering subjects. Comunicación en congreso. 3rd Especial Symposium on New Frontiers in Manufacturing Engineering and Materials Processing Training and Learning. Las Palmas de Gran Canaria. 2012
G. Centeno;Vallellano-Martin, Carpoforo;Doblas-Charneco, Francisco Javier;Martínez-Donaire, Andrés Jesús;Estevez-Urra, Aida;Garcia-Lomas-Jung, Francisco Javier:
Sistema de autoevaluación continua en la asignatura Tecnología de Fabricación. Ponencia en Congreso. XX Congreso Universitario de Innovación Educativa en las Enseñanzas Técnicas. Las Palmas de Gran Canaria (España). 2012
Sistema de autoevaluación continua en la asignatura Tecnología de Fabricación. Ponencia en Congreso. XX Congreso Universitario de Innovación Educativa en las Enseñanzas Técnicas. Las Palmas de Gran Canaria (España). 2012
Martínez-Donaire, Andrés Jesús;Vallellano-Martin, Carpoforo;G. Centeno;Morales-Palma, Domingo;Doblas-Charneco, Francisco Javier;Garcia-Lomas-Jung, Francisco Javier:
TIME-DEPENDENT METHODOLOGY FOR THE EXPERIMENTAL EVALUATION OF THE ONSET OF NECKING UNDER THROUGH THICKNESS STRAIN GRADIENTS. Ponencia en Congreso. Forming Technology Forum 12. ZURICH, SUIZA. 2012
TIME-DEPENDENT METHODOLOGY FOR THE EXPERIMENTAL EVALUATION OF THE ONSET OF NECKING UNDER THROUGH THICKNESS STRAIN GRADIENTS. Ponencia en Congreso. Forming Technology Forum 12. ZURICH, SUIZA. 2012
G. Centeno;Vázquez-Valeo, Jesús;Morales-Palma, Domingo;Martínez-Donaire, Andrés Jesús;Garcia-Lomas-Jung, Francisco Javier;Vallellano-Martin, Carpoforo:
Numerical analysis of the deformation mechanisms in incremental forming of aa2024-t3 sheets. Ponencia en Congreso. 4th Manufacturing Engineering Society Internacional Conference (2011). - CÁDIZ, ESPAÑA. 2011
Numerical analysis of the deformation mechanisms in incremental forming of aa2024-t3 sheets. Ponencia en Congreso. 4th Manufacturing Engineering Society Internacional Conference (2011). - CÁDIZ, ESPAÑA. 2011
G. Centeno;Vallellano-Martin, Carpoforo;Morales-Palma, Domingo;Garcia-Lomas-Jung, Francisco Javier:
NUMERICAL ANALYSIS OF THE DEFORMATION MECHANISM IN INCREMENTAL SHEET FORMING VS. STRETCH-BENDING. Comunicación en congreso. INTERNATIONAL CONFERENCE ON TECHNOLOGY OF PLASTICITY (10) (10.2011.AACHEN, ALEMANIA). AACHEN, ALEMANIA. 2011
NUMERICAL ANALYSIS OF THE DEFORMATION MECHANISM IN INCREMENTAL SHEET FORMING VS. STRETCH-BENDING. Comunicación en congreso. INTERNATIONAL CONFERENCE ON TECHNOLOGY OF PLASTICITY (10) (10.2011.AACHEN, ALEMANIA). AACHEN, ALEMANIA. 2011
G. Centeno;Vallellano-Martin, Carpoforo;Doblas-Charneco, Francisco Javier;Martínez-Donaire, Andrés Jesús;Garcia-Lomas-Jung, Francisco Javier:
ANÁLISIS DE UNA METODOLOGÍA DE AUTOEVALUACIÓN ONLINE PARA ASIGNATURAS TÉCNICAS EN ESTUDIOS UNIVERSITARIOS DE INGENIERÍA. Comunicación en congreso. CONGRESO INTERNACIONAL DE DOCENCIA UNIVERSITARIA (2) (2.2011.VIGO, ESPAÑA). VIGO, ESPAÑA. 2011
ANÁLISIS DE UNA METODOLOGÍA DE AUTOEVALUACIÓN ONLINE PARA ASIGNATURAS TÉCNICAS EN ESTUDIOS UNIVERSITARIOS DE INGENIERÍA. Comunicación en congreso. CONGRESO INTERNACIONAL DE DOCENCIA UNIVERSITARIA (2) (2.2011.VIGO, ESPAÑA). VIGO, ESPAÑA. 2011
Doblas-Charneco, Francisco Javier;G. Centeno;Morales-Palma, Domingo;Garcia-Lomas-Jung, Francisco Javier:
OPTIMIZACIÓN DE PROCESOS DE TREFILADO MULTI-ETAPA MEDIANTE MÉTODOS DE BÚSQUEDA DIRECTA.. Ponencia en Congreso. IX CONGRESO IBEROAMERICANO DE INGENIERÍA MECÁNICA (2009).LAS PALMAS DE GRAN CANARIA). LAS PALMAS DE GRAN CANARIA. 2009
OPTIMIZACIÓN DE PROCESOS DE TREFILADO MULTI-ETAPA MEDIANTE MÉTODOS DE BÚSQUEDA DIRECTA.. Ponencia en Congreso. IX CONGRESO IBEROAMERICANO DE INGENIERÍA MECÁNICA (2009).LAS PALMAS DE GRAN CANARIA). LAS PALMAS DE GRAN CANARIA. 2009
Silva, M.b. ;G. Centeno;Vallellano-Martin, Carpoforo;Martins, P.a.f.:
Forming Limits by Necking and Fracture in Sheet Metal Forming. Comunicación en congreso. . .
Forming Limits by Necking and Fracture in Sheet Metal Forming. Comunicación en congreso. . .
Borrego, Marcos;G. Centeno;Vallellano-Martin, Carpoforo:
On the Study of the Single-stage Hole-Flanging Process by SPIF. Comunicación en congreso. . .
On the Study of the Single-stage Hole-Flanging Process by SPIF. Comunicación en congreso. . .
Artículos publicados
Rosa-sainz, Ana;G. Centeno;Silva, Beatriz;Vallellano-Martin, Carpoforo:
Experimental Investigation of Polycarbonate Sheets Deformed by SPIF: Formability, Micro-mechanisms of Failure and Temperature Analysis. Journal of Materials Research and Technology. 2023. Vol: 25. Pág. 7546-7565. 10.1016/j.jmrt.2023.07.075.
Experimental Investigation of Polycarbonate Sheets Deformed by SPIF: Formability, Micro-mechanisms of Failure and Temperature Analysis. Journal of Materials Research and Technology. 2023. Vol: 25. Pág. 7546-7565. 10.1016/j.jmrt.2023.07.075.
Rosa-sainz, Ana;Garcia Romeu, Maria Luisa;Ferrer, Inés;Silva, Beatriz;G. Centeno:
On the effective peek application for customized cranio-maxillofacial prostheses: an experimental formability analysis. Journal of Manufacturing Processes. 2023. Vol: 86. Pág. 66-84. 10.1016/j.jmapro.2022.12.044.
On the effective peek application for customized cranio-maxillofacial prostheses: an experimental formability analysis. Journal of Manufacturing Processes. 2023. Vol: 86. Pág. 66-84. 10.1016/j.jmapro.2022.12.044.
Rosa-sainz, Ana;Silva, Maria Beatriz;Beltrán-Custodio, Ana María;G. Centeno;Vallellano-Martin, Carpoforo:
Assessing Formability and Failure of UHMWPE Sheets through SPIF: A Case Study in Medical Applications. Polymers. 2023. Vol: 15. Pág. 3560,1-3560,21. 10.3390/polym15173560.
Assessing Formability and Failure of UHMWPE Sheets through SPIF: A Case Study in Medical Applications. Polymers. 2023. Vol: 15. Pág. 3560,1-3560,21. 10.3390/polym15173560.
Rosa-sainz, Ana;Silva, Beatriz;G. Centeno;Vallellano-Martin, Carpoforo:
Assessing Formability and Failure of UHMWPE Sheets through SPIF: A Case Study in Medical Applications. Polymers. 2023. Vol: 15. Núm: 17. 10.3390/polym15173560.
Assessing Formability and Failure of UHMWPE Sheets through SPIF: A Case Study in Medical Applications. Polymers. 2023. Vol: 15. Núm: 17. 10.3390/polym15173560.
Suntaxi, Carlos;G. Centeno;Rosa-sainz, Ana;Morales-Palma, Domingo;Vallellano-Martin, Carpoforo:
Numerical Modelling of Conventional and Incremental Forming of Thin-Walled Tube. Key Engineering Materials. 2022. Vol: 926. Pág. 768-775. 10.4028/p-dp1242.
Numerical Modelling of Conventional and Incremental Forming of Thin-Walled Tube. Key Engineering Materials. 2022. Vol: 926. Pág. 768-775. 10.4028/p-dp1242.
López-fernández, José Andrés;G. Centeno;Martínez-Donaire, Andrés Jesús;Morales-Palma, Domingo;Vallellano-Martin, Carpoforo:
Stretch-flanging of AA2024-T3 sheet by single-stage SPIF. Thin-Walled Structures. 2021. Vol: 160. Núm: 107338. 10.1016/j.tws.2020.107338.
Stretch-flanging of AA2024-T3 sheet by single-stage SPIF. Thin-Walled Structures. 2021. Vol: 160. Núm: 107338. 10.1016/j.tws.2020.107338.
Morales-Palma, Domingo;Borrego, Marcos;López-fernández, Jo¿e Andrés;Martínez-Donaire, Andrés Jesús;G. Centeno;Vallellano-Martin, Carpoforo:
Numerical analysis of necking in stretch-bending based on modified maximum force criteria. IOP Conference Series: Materials Science and Engineering. 2021. Vol: 1193. Núm: 012081. 10.1088/1757-899X/1193/1/012081.
Numerical analysis of necking in stretch-bending based on modified maximum force criteria. IOP Conference Series: Materials Science and Engineering. 2021. Vol: 1193. Núm: 012081. 10.1088/1757-899X/1193/1/012081.
Rosa-sainz, Ana;G. Centeno;Silva, Beatriz;Vallellano-Martin, Carpoforo:
Experimental failure analysis in polycarbonate sheet deformed by spif. Journal of Manufacturing Processes. 2021. Vol: 64. Núm: 1153. 10.1016/j.jmapro.2021.01.047.
Experimental failure analysis in polycarbonate sheet deformed by spif. Journal of Manufacturing Processes. 2021. Vol: 64. Núm: 1153. 10.1016/j.jmapro.2021.01.047.
Flores, G.;Palomo, David;Martínez-Donaire, Andrés Jesús;Borrego, Marcos;López-fernández, José Andrés;Morales-Palma, Domingo;G. Centeno;Vallellano-Martin, Carpoforo:
Design for FDM of flexible tooling for manufacturing aeronautical components by incremental sheet forming. IOP Conference Series: Materials Science and Engineering. 2021. Vol: 1193. Núm: 012042. 10.1088/1757-899X/1193/1/012042.
Design for FDM of flexible tooling for manufacturing aeronautical components by incremental sheet forming. IOP Conference Series: Materials Science and Engineering. 2021. Vol: 1193. Núm: 012042. 10.1088/1757-899X/1193/1/012042.
Rosa-sainz, Ana;G. Centeno;Silva, Beatriz;López-fernandez, Jose Andrés;Martínez-Donaire, Andrés Jesús;Vallellano-Martin, Carpoforo:
On the Determination of Forming Limits in Polycarbonate Sheets. Materials. 2020. Vol: 13. Núm: 4. 10.3390/ma13040928.
On the Determination of Forming Limits in Polycarbonate Sheets. Materials. 2020. Vol: 13. Núm: 4. 10.3390/ma13040928.
Rosa-sainz, Ana;G. Centeno;Silva, M.b.;López-fernández, J.a.;Martínez-Donaire, Andrés Jesús;Vallellano-Martin, Carpoforo:
On the determination of forming limits in polycarbonate sheets. Materials. 2020. Vol: 13. Núm: 928. 10.3390/ma13040928.
On the determination of forming limits in polycarbonate sheets. Materials. 2020. Vol: 13. Núm: 928. 10.3390/ma13040928.
Lopez-fernandez, J. A.;G. Centeno;Martínez-Donaire, Andrés Jesús;Morales-Palma, Domingo;Vallellano-Martin, Carpoforo:
Critical evaluation of the formability of AA2024-T3 sheet deformed by single-point incremental forming. Dyna. 2019. Vol: 94. Núm: 5. Pág. 523-529. http://dx.doi.org/10.6036/9141.
Critical evaluation of the formability of AA2024-T3 sheet deformed by single-point incremental forming. Dyna. 2019. Vol: 94. Núm: 5. Pág. 523-529. http://dx.doi.org/10.6036/9141.
Borrego, Marcos;Morales-Palma, Domingo;Martínez-Donaire, Andrés Jesús;G. Centeno;Vallellano-Martin, Carpoforo:
Analysis of formability in conventional hole flanging of AA7075-O sheets: punch edge radius effect and limitations of the FLC. International Journal of Material Forming. 2019. 10.1007/s12289-019-01487-2.
Analysis of formability in conventional hole flanging of AA7075-O sheets: punch edge radius effect and limitations of the FLC. International Journal of Material Forming. 2019. 10.1007/s12289-019-01487-2.
Martínez-Donaire, Andrés Jesús;Borrego, Marcos;Morales-Palma, Domingo;G. Centeno;Vallellano-Martin, Carpoforo:
Analysis of the influence of stress triaxiality on formability of hole-flanging by single-stage SPIF. International Journal of Mechanical Sciences. 2019. Vol: 151. Pág. 76-84. 10.1016/j.ijmecsci.2018.11.006.
Analysis of the influence of stress triaxiality on formability of hole-flanging by single-stage SPIF. International Journal of Mechanical Sciences. 2019. Vol: 151. Pág. 76-84. 10.1016/j.ijmecsci.2018.11.006.
Cristino, Valentino;Magrinho, João;G. Centeno;Silva, M. Beatriz;Martins, Paulo:
A digital image correlation based methodology to characterize formability in tube forming. Journal of Strain Analysis for Engineering Design. 2019. https://doi.org/10.1177/0309324718823629.
A digital image correlation based methodology to characterize formability in tube forming. Journal of Strain Analysis for Engineering Design. 2019. https://doi.org/10.1177/0309324718823629.
Morales-Palma, Domingo;Borrego, Marcos;Martínez-Donaire, Andrés Jesús;G. Centeno;Vallellano-Martin, Carpoforo:
Optimization of Hole-Flanging by Single Point Incremental Forming in Two Stages. Materials. 2018. Vol: 11. Núm: 2029. 10.3390/ma11102029.
Optimization of Hole-Flanging by Single Point Incremental Forming in Two Stages. Materials. 2018. Vol: 11. Núm: 2029. 10.3390/ma11102029.
Martínez-Donaire, Andrés Jesús;Morales-Palma, Domingo;Borrego, Marcos;G. Centeno;Vallellano-Martin, Carpoforo:
On the effect of stress state on the failure limits of hole-flanged parts formed by SPIF. Journal of Physics: Conference Series. 2018. Vol: 1063. Pág. 1-6. 10.1088/1742-6596/1063/1/012151.
On the effect of stress state on the failure limits of hole-flanged parts formed by SPIF. Journal of Physics: Conference Series. 2018. Vol: 1063. Pág. 1-6. 10.1088/1742-6596/1063/1/012151.
Morales-Palma, Domingo;Borrego, Marcos;Martínez-Donaire, Andrés Jesús;G. Centeno;Vallellano-Martin, Carpoforo:
Numerical study on the thickness homogenization in hole-flanging by single-point incremental forming. Journal of Physics: Conference Series. 2018. Vol: 1063. Pág. 1-6. 10.1088/1742-6596/1063/1/012183.
Numerical study on the thickness homogenization in hole-flanging by single-point incremental forming. Journal of Physics: Conference Series. 2018. Vol: 1063. Pág. 1-6. 10.1088/1742-6596/1063/1/012183.
G. Centeno;Martínez-Donaire, Andrés Jesús;Morales-Palma, Domingo;Vallellano-Martin, Carpoforo:
Experimental and numerical analysis of the flanging process by SPIF. Journal of Physics: Conference Series. 2018. Vol: 1063. Pág. 1-6. 10.1088/1742-6596/1063/1/012086.
Experimental and numerical analysis of the flanging process by SPIF. Journal of Physics: Conference Series. 2018. Vol: 1063. Pág. 1-6. 10.1088/1742-6596/1063/1/012086.
González-pérez-somarriba, Borja;G. Centeno;Gonzalez-Perez, Luis Miguel;Vallellano-Martin, Carpoforo:
On the Analysis of the Contact Conditions in Temporomandibular Joint Prostheses. Advances in Materials Science and Engineering. 2018. Vol: 2018. Núm: 2687864. Pág. 1-10. https://doi.org/10.1155/2018/2687864.
On the Analysis of the Contact Conditions in Temporomandibular Joint Prostheses. Advances in Materials Science and Engineering. 2018. Vol: 2018. Núm: 2687864. Pág. 1-10. https://doi.org/10.1155/2018/2687864.
Martínez-Donaire, Andrés Jesús;Morales-Palma, Domingo;Caballero, A;Borrego, Marcos;G. Centeno;Vallellano-Martin, Carpoforo:
Numerical explicit analysis of hole flanging by single-stage incremental forming. Procedia Manufacturing. 2017. Vol: 13. Pág. 132-138. 10.1016/j.promfg.2017.09.019.
Numerical explicit analysis of hole flanging by single-stage incremental forming. Procedia Manufacturing. 2017. Vol: 13. Pág. 132-138. 10.1016/j.promfg.2017.09.019.
Martínez-Donaire, Andrés Jesús;Morales-Palma, Domingo;G. Centeno;Borrego, Marcos;Vallellano-Martin, Carpoforo:
Teaching & Learning of Sheet Metal Forming Processes Using DEFORM-3D. Materials Science Forum. 2017. Vol: 903. Pág. 48-55. 10.4028/www.scientific.net/MSF.903.48.
Teaching & Learning of Sheet Metal Forming Processes Using DEFORM-3D. Materials Science Forum. 2017. Vol: 903. Pág. 48-55. 10.4028/www.scientific.net/MSF.903.48.
Morales-Palma, Domingo;Borrego, Marcos;Martínez-Donaire, Andrés Jesús;G. Centeno;Vallellano-Martin, Carpoforo:
Preliminary investigation on homogenization of the thickness distribution in hole-flanging by SPIF. Procedia Manufacturing. 2017. Vol: 13. Pág. 124-131. 10.1016/j.promfg.2017.09.101 .
Preliminary investigation on homogenization of the thickness distribution in hole-flanging by SPIF. Procedia Manufacturing. 2017. Vol: 13. Pág. 124-131. 10.1016/j.promfg.2017.09.101 .
Serrano-González, Javier;G. Centeno:
A Market-Based Analysis on the Main Characteristics of Gearboxes Used in Onshore Wind Turbines. Energies. 2017. Vol: 10. Núm: 11. 10.3390/en10111686.
A Market-Based Analysis on the Main Characteristics of Gearboxes Used in Onshore Wind Turbines. Energies. 2017. Vol: 10. Núm: 11. 10.3390/en10111686.
Isabel, Bagudanch;G. Centeno;Vallellano-Martin, Carpoforo;García-romeu, M.l.:
Revisiting formability and failure of polymeric sheets deformed by Single Point Incremental Forming. Polymer Degradation and Stability. 2017. Vol: 144. Pág. 366-377. 10.1016/j.polymdegradstab.2017.08.021 .
Revisiting formability and failure of polymeric sheets deformed by Single Point Incremental Forming. Polymer Degradation and Stability. 2017. Vol: 144. Pág. 366-377. 10.1016/j.polymdegradstab.2017.08.021 .
Morales-Palma, Domingo;Martínez-Donaire, Andrés Jesús;G. Centeno;Borrego, Marcos;Vallellano-Martin, Carpoforo:
Teaching and Learning of Manufacturing Engineering through Virtualization of Processes on CNC Machines. Materials Science Forum. 2017. Vol: 903. Pág. 112-119. 10.4028/www.scientific.net/MSF.903.112.
Teaching and Learning of Manufacturing Engineering through Virtualization of Processes on CNC Machines. Materials Science Forum. 2017. Vol: 903. Pág. 112-119. 10.4028/www.scientific.net/MSF.903.112.
G. Centeno;Martínez-Donaire, Andrés Jesús;Bagudanch, Isabel;Morales-Palma, Domingo;Garcia-romeu, Maria Luisa;Vallellano-Martin, Carpoforo:
Revisiting Formability and Failure of AISI304 Sheets in SPIF: Experimental Approach and Numerical Validation. Metals. 2017. Vol: 7. Núm: 12. 10.3390/met7120531.
Revisiting Formability and Failure of AISI304 Sheets in SPIF: Experimental Approach and Numerical Validation. Metals. 2017. Vol: 7. Núm: 12. 10.3390/met7120531.
G. Centeno;Morales-Palma, Domingo;González Pérez Somarriba, B.;Bagudanch, I.;Egea Guerrero, J.j.;González Pérez, L.m.;García Romeu, M.l.;Vallellano-Martin, Carpoforo:
A Functional Methodology on the Manufacturing of Customized Polymeric Cranial Prostheses from CAT using SPIF. Rapid Prototyping Journal. 2017. Vol: 23. Núm: 4.
A Functional Methodology on the Manufacturing of Customized Polymeric Cranial Prostheses from CAT using SPIF. Rapid Prototyping Journal. 2017. Vol: 23. Núm: 4.
Borrego, Marcos;Morales-Palma, Domingo;Martínez-Donaire, Andrés Jesús;G. Centeno;Vallellano-Martin, Carpoforo:
Experimental study of hole-flanging by single-stage incremental sheet forming. Journal of Materials Processing Technology. 2016. Vol: 237. Pág. 320-330. http://dx.doi.org/10.1016/j.jmatprotec.2016.06.026.
Experimental study of hole-flanging by single-stage incremental sheet forming. Journal of Materials Processing Technology. 2016. Vol: 237. Pág. 320-330. http://dx.doi.org/10.1016/j.jmatprotec.2016.06.026.
G. Centeno;Silva, Maria Beatriz;Alves, Luis M.;Vallellano-Martin, Carpoforo;Martins, Paulo A.f.:
Towards the characterization of fracture in thin-walled tube forming. International Journal of Mechanical Sciences. 2016. Vol: 119. Pág. 12-22. 10.1016/j.ijmecsci.2016.10.001.
Towards the characterization of fracture in thin-walled tube forming. International Journal of Mechanical Sciences. 2016. Vol: 119. Pág. 12-22. 10.1016/j.ijmecsci.2016.10.001.
G. Centeno;Martínez-Donaire, Andrés Jesús;Morales-Palma, Domingo;Borrego, Marcos;Vallellano-Martin, Carpoforo:
Multidisciplinary learning of manufacturing engineering through bachelor and master theses in incremental sheet forming. Materials Science Forum. 2016. Vol: 853. Pág. 58-63. http://dx.doi.org/10.4028/www.scientific.net/MSF.853.58.
Multidisciplinary learning of manufacturing engineering through bachelor and master theses in incremental sheet forming. Materials Science Forum. 2016. Vol: 853. Pág. 58-63. http://dx.doi.org/10.4028/www.scientific.net/MSF.853.58.
Gonzalez-Perez, Luis Miguel;González-pérez, Borja;G. Centeno;Vallellano-Martin, Carpoforo;Montes, J:
Evaluation of total alloplastic temporo-mandibular joint replacement with two different types of prostheses: A three-year prospective study. Medicina Oral, Patología Oral y Cirugía Bucal. 2016. Vol: 21. Núm: 6. Pág. 766-775. 10.4317/medoral.21189 .
Evaluation of total alloplastic temporo-mandibular joint replacement with two different types of prostheses: A three-year prospective study. Medicina Oral, Patología Oral y Cirugía Bucal. 2016. Vol: 21. Núm: 6. Pág. 766-775. 10.4317/medoral.21189 .
Morales-Palma, Domingo;Martínez-Donaire, Andrés Jesús;G. Centeno;Vallellano-Martin, Carpoforo:
Teaching experience for the virtualization of machine tools and simulation of manufacturing operations. Materials Science Forum. 2016. Vol: 853. Pág. 79-84. http://dx.doi.org/10.4028/www.scientific.net/MSF.853.79.
Teaching experience for the virtualization of machine tools and simulation of manufacturing operations. Materials Science Forum. 2016. Vol: 853. Pág. 79-84. http://dx.doi.org/10.4028/www.scientific.net/MSF.853.79.
Silva, M. Beatriz;Martínez-Donaire, Andrés Jesús;G. Centeno;Morales-Palma, Domingo;Vallellano-Martin, Carpoforo;Martins, Paulo A. F.:
Recent Approaches for the Determination of Forming Limits by Necking and Fracture in Sheet Metal Forming. Procedia Engineering. 2015. Vol: 132. Pág. 342-349. http://dx.doi.org/10.1016/j.proeng.2015.12.504.
Recent Approaches for the Determination of Forming Limits by Necking and Fracture in Sheet Metal Forming. Procedia Engineering. 2015. Vol: 132. Pág. 342-349. http://dx.doi.org/10.1016/j.proeng.2015.12.504.
Bagudanch, Isabel;Garcia-romeu, María Luisa;G. Centeno;Elías-zúñiga, Alex;Ciurana, Joaquim:
Forming force and temperature effects on single point incremental forming of polyvinylchloride. Journal of Materials Processing Technology. 2015. Vol: 219. Pág. 221-229. 10.1016/j.jmatprotec.2014.12.004.
Forming force and temperature effects on single point incremental forming of polyvinylchloride. Journal of Materials Processing Technology. 2015. Vol: 219. Pág. 221-229. 10.1016/j.jmatprotec.2014.12.004.
Borrego, Marcos;Morales-Palma, Domingo;Martínez-Donaire, Andrés Jesús;G. Centeno;Vallellano-Martin, Carpoforo:
On the Study of the Single-stage Hole-flanging Process by SPIF. Procedia Engineering. 2015. Vol: 132. Pág. 290-297. http://dx.doi.org/10.1016/j.proeng.2015.12.497.
On the Study of the Single-stage Hole-flanging Process by SPIF. Procedia Engineering. 2015. Vol: 132. Pág. 290-297. http://dx.doi.org/10.1016/j.proeng.2015.12.497.
G. Centeno;Bagudanch, Isabel;Martínez-Donaire, Andrés Jesús;Garcia-romeu, Maria Luisa;Vallellano-Martin, Carpoforo:
Critical analysis of necking and fracture limit strains and forming forces in single-point incremental forming. Materials & Design. 2014. Vol: 63. Pág. 20-29. 10.1016/j.matdes.2014.05.066.
Critical analysis of necking and fracture limit strains and forming forces in single-point incremental forming. Materials & Design. 2014. Vol: 63. Pág. 20-29. 10.1016/j.matdes.2014.05.066.
Martínez-palmeth, Luis Humberto;Martínez-Donaire, Andrés Jesús;G. Centeno;Garcia-Lomas-Jung, Francisco Javier;Vallellano-Martin, Carpoforo:
Formability of Automotive H240LA Steel Sheets in Stretch-Bending Processes. Procedia Engineering. 2013. Vol: 63. Pág. 669-677.
Formability of Automotive H240LA Steel Sheets in Stretch-Bending Processes. Procedia Engineering. 2013. Vol: 63. Pág. 669-677.
Martínez-palmeth, Luis Humberto;Martínez-Donaire, Andrés Jesús;Vallellano-Martin, Carpoforo;G. Centeno;Garcia-Lomas-Jung, Francisco Javier:
Experimental Study of the Formability of H240LA Steel Sheets under Stretch-Bending Conditions. Key Engineering Materials. 2013. Vol: 549. Pág. 349-355.
Experimental Study of the Formability of H240LA Steel Sheets under Stretch-Bending Conditions. Key Engineering Materials. 2013. Vol: 549. Pág. 349-355.
G. Centeno;Bagudanch, Isabel;Garcia-romeu, Maria Luisa;Martínez-Donaire, Andrés Jesús;Vallellano-Martin, Carpoforo:
Experimental Study on the Overall Spifability of AISI 304 Sheets under Different Bending Conditions. Key Engineering Materials. 2013. Vol: 554-557. Pág. 2293-2298.
Experimental Study on the Overall Spifability of AISI 304 Sheets under Different Bending Conditions. Key Engineering Materials. 2013. Vol: 554-557. Pág. 2293-2298.
G. Centeno;Martínez-Donaire, Andrés Jesús;Vallellano-Martin, Carpoforo;Martínez-palmeth, Luis Humberto;Morales-Palma, Domingo;Suntaxi, Carlos;Garcia-Lomas-Jung, Francisco Javier:
Experimental Study on the Evaluation of Necking and Fracture Strains in Sheet Metal Forming Processes . Procedia Engineering. 2013. Vol: 63. Pág. 650-658.
Experimental Study on the Evaluation of Necking and Fracture Strains in Sheet Metal Forming Processes . Procedia Engineering. 2013. Vol: 63. Pág. 650-658.
Morales-Palma, Domingo;G. Centeno;Vallellano-Martin, Carpoforo;Doblas-Charneco, Francisco Javier;Martínez-Donaire, Andrés Jesús;Estevez-Urra, Aida;Garcia-Lomas-Jung, Francisco Javier:
Self-Evaluation E-Learning System for Manufacturing Engineering Subjects. Materials Science Forum. 2013. Vol: 759. Pág. 121-128. 10.4028/www.scientific.net/MSF.759.121.
Self-Evaluation E-Learning System for Manufacturing Engineering Subjects. Materials Science Forum. 2013. Vol: 759. Pág. 121-128. 10.4028/www.scientific.net/MSF.759.121.
Estevez-Urra, Aida;Doblas-Charneco, Francisco Javier;Vallellano-Martin, Carpoforo;Morales-Palma, Domingo;G. Centeno;Martínez-Donaire, Andrés Jesús;Garcia-Lomas-Jung, Francisco Javier:
Teaching Experience on Metal Forming Processes through Case Study Methodology. Materials Science Forum. 2013. Vol: 759. Pág. 39-46. 10.4028/www.scientific.net/MSF.759.39.
Teaching Experience on Metal Forming Processes through Case Study Methodology. Materials Science Forum. 2013. Vol: 759. Pág. 39-46. 10.4028/www.scientific.net/MSF.759.39.
Bagudanch, Isabel;G. Centeno;Vallellano-Martin, Carpoforo;García-romeu, M.l.:
Forming Force in Single Point Incremental Forming under Different Bending Conditions. Procedia Engineering. 2013. Vol: 63. Pág. 354-360. 10.1016/j.proeng.2013.08.207 .
Forming Force in Single Point Incremental Forming under Different Bending Conditions. Procedia Engineering. 2013. Vol: 63. Pág. 354-360. 10.1016/j.proeng.2013.08.207 .
G. Centeno;Silva, Maria Beatriz;Cristino, Valentino;Vallellano-Martin, Carpoforo;Martins, Paulo A.f.:
Hole-flanging by incremental sheet forming. International Journal of Machine Tools and Manufacture. 2012. Vol: 59. Pág. 46-54.
Hole-flanging by incremental sheet forming. International Journal of Machine Tools and Manufacture. 2012. Vol: 59. Pág. 46-54.
Morales-Palma, Domingo;Vallellano-Martin, Carpoforo;Martínez-Donaire, Andrés Jesús;G. Centeno;Garcia-Lomas-Jung, Francisco Javier:
Influence of Punch Radius on the Formability of AA7075-O Sheets. Steel Research International. 2012. Vol: Sp.Ed. Metal Forming. Pág. 247-250.
Influence of Punch Radius on the Formability of AA7075-O Sheets. Steel Research International. 2012. Vol: Sp.Ed. Metal Forming. Pág. 247-250.
G. Centeno;Doblas-Charneco, Francisco Javier;Martinez-palmeth, Luis H.;Martínez-Donaire, Andrés Jesús;Vallellano-Martin, Carpoforo:
FEA of the bending in the formability of metal sheets via incremental forming. Steel Research International. 2012. Vol: Metal Forming Sp. Ed.. Pág. 447-450.
FEA of the bending in the formability of metal sheets via incremental forming. Steel Research International. 2012. Vol: Metal Forming Sp. Ed.. Pág. 447-450.
G. Centeno;Silva, Beatriz;Vallellano-Martin, Carpoforo;Martins, Paulo:
Manufacturing of sheet metal flanged parts using multi-stage spif. Steel Research International. 2012. Vol: Metal Forming Sp. Ed.. Pág. 271-274.
Manufacturing of sheet metal flanged parts using multi-stage spif. Steel Research International. 2012. Vol: Metal Forming Sp. Ed.. Pág. 271-274.
G. Centeno;Vallellano-Martin, Carpoforo;Vázquez-Valeo, Jesús;Doblas-Charneco, Francisco Javier;Martínez-Donaire, Andrés Jesús;Garcia-Lomas-Jung, Francisco Javier:
Numerical Analysis of the Stress/Strain Evolution in Incremental Sheet Forming and Stretch-bending Processes. Materials Science Forum. 2012. Vol: 713. Pág. 103-108.
Numerical Analysis of the Stress/Strain Evolution in Incremental Sheet Forming and Stretch-bending Processes. Materials Science Forum. 2012. Vol: 713. Pág. 103-108.
G. Centeno;Morales-Sanchez, Francisco Jose;Perez-Guerrero, Francisco De Borja;Garcia-Benitez, Francisco:
CONTINUOUS VARIABLE TRANSMISSION WITH AN INERTIA-REGULATING SYSTEM. Journal of Mechanical Design. 2010. Vol: 132. Pág. 051004-1-051004-13.
CONTINUOUS VARIABLE TRANSMISSION WITH AN INERTIA-REGULATING SYSTEM. Journal of Mechanical Design. 2010. Vol: 132. Pág. 051004-1-051004-13.
Centeno-Baez, Gabriel;Garcia-Benitez, Francisco;Wideberg-, Johan:
EXPERIMENTAL STUDY OF IMPACT ON SMC COMPOSITES USED IN THE AUTOMOTIVE INDUSTRY. International Journal of Vehicle Design. 2007. Vol: 44. Núm: 3-4. Pág. 282-292.
EXPERIMENTAL STUDY OF IMPACT ON SMC COMPOSITES USED IN THE AUTOMOTIVE INDUSTRY. International Journal of Vehicle Design. 2007. Vol: 44. Núm: 3-4. Pág. 282-292.
Patentes
Martínez-Donaire, Andrés Jesús;G. Centeno;Vallellano-Martin, Carpoforo;Morales-Palma, Domingo;Beltran-calero, Juan;Gil-báez, Pedro;Cala-romero, Antonio: Arandela para Establecer Continuidad Eléctrica. Número de patente: ES 2552589 B2
Garcia-Benitez, Francisco;G. Centeno;Perez-Guerrero, Francisco De Borja;Morales-Sanchez, Francisco Jose: SISTEMA DE TRANSMISIÓN CONTINUAMENTE VARIABLE. Número de patente: WO 2010/070158 A1
Garcia-Benitez, Francisco;Perez-Guerrero, Francisco De Borja;Morales-Sanchez, Francisco Jose;G. Centeno: SISTEMA DE TRANSMISIÓN CONTINUAMENTE VARIABLE. Número de patente:
Tesis dirigidas o codirigidas
Bagudanch, Isabel:
Incremental Sheet Forming technologies for manufacturing biocompatible polymer prostheses. Tesis Doctoral. 2017
Incremental Sheet Forming technologies for manufacturing biocompatible polymer prostheses. Tesis Doctoral. 2017
