EVA MARIA PEREZ SORIANO

Categoría
Profesor Ayudante Doctor

Contacto

Teléfono
Correo electrónico
Área
Ciencias de Materiales e Ingeniería Metalúrgica

Investigación

Grupo de investigación

METALURGIA E INGENIERIA DE LOS MATERIALES (MIM)

Proyectos y contratos de investigación

OBTENCIÓN Y CARACTERIZACIÓN DE TITANIO CON POROSIDAD GRADIENTE MEDIANTE TÉCNICAS PULVIMETALÚRGICAS NO CONVENCIONALES (MAT2010-20855 - Investigador/a)
Implante dental poroso, procedimiento de fabricación y modificación superficial (PDC2022-133369-I00 - Investigador/a)
Fabrication of Fe-Based Porous Materials Using the Directional Solidification Technique (FePoMat) (MAT2016-76713-P - Investigador/a)
Incentivo al Grupo de Investigación TEP-123 (2017) (2017/TEP-123 - Investigador/a)
Ayudas para uso de los Servicios Generales de Investigación (CITIUS), VII Plan Propio de Investigación y Transferencia de la Universidad de Sevilla: 2 (Plan propio - Investigador/a)
Ayudas para uso de los Servicios Generales de Investigación (CITIUS), VI Plan Propio de Investigación y Transferencia de la Universidad de Sevilla: 20 (Plan propio - Investigador/a)
Ayudas para uso de los Servicios Generales de Investigación (CITIUS), VI Plan Propio de Investigación y Transferencia de la Universidad de Sevilla: 2 (PPI574/2020 - Investigador/a)
Ayudas para uso de los Servicios Generales de Investigación (CITIUS), VI Plan Propio de Investigación y Transferencia de la Universidad de Sevilla: 20 (I.5 AYUDAS PARA EL USO DE LOS SERVICIOS GENERALES DE INVESTIGACIÓN - Investigador/a)
Mirada Microscópica de los Materiales (. - Participante)
Técnicas avanzadas de caracterización de materiales compuestos de matriz metálica (MMCs) (Plan Propio - Investigador/a)
Caracterización de muestras sinterizadas (AE-1841/08/2018 - Investigador/a)
Determinación de propiedades mecánicas de muestras pulvimetalúrgicas (AE-1840/08/2018 - Investigador/a)
AYUDAS PARA EL USO DE LOS SERVICIOS GENERALES DE INVESTIGACIÓN (Universidad de Sevilla, VI Plan Propio de Investigación y Transferencia, 2018, I.5) (P2018/00000348 - Coordinador)
Ensayos de caracterización Pulvimetalurgica (AE-1822/08/2018 - Responsable)
Introspección de los materiales (Participante)
Desarrollo de Materiales Porosos y Estructuras Reticulares para Aplicaciones Aeroespaciales (PI-1170/08/2013 - Investigador/a)
Caracterización de componenetes pulvimetalúrgicos (AE-1343/2014 - Investigador/a)
Fabricación de Materiales Porosos de Base Fe Mediante la Técnica de Solidificación Direccional (MAT2016-76713-P - Investigador/a)
Incentivo al Grupo de Investigación TEP-123 (2011) (2011/TEP-123 - Investigador/a)
Incentivo al Grupo de Investigación TEP-123 (2010) (2010/TEP-123 - Investigador/a)
Estancia: Centro Tecnológico de Investigación RHP-Technology, Seibersdorf, Austria, 60 días (PP2011-05-131 - Investigador/a)
Modelado e implementación del proceso de consolidación de polvos por descarga eléctrica de condensadores (P08-TEP-03537 - Investigador/a)
MAPER (PR-00288 - Investigador/a)

Libros publicados

Perez-Soriano, Eva Maria;Arévalo-Mora, Cristina;Montealegre-Meléndez, Isabel:
Colección de problemas resueltos de Ciencia de Materiales Aeroespaciales. Universidad de Sevilla. 2018. 978-84-472-1900-1

Capítulos en Libros

Perez-Soriano, Eva Maria;Montealegre-Meléndez, Isabel;Arévalo-Mora, Cristina;Neubauer, Erich;Kitzmantel, Michael:
Effect of Processing Atmosphere and Secondary Operations on the Mechanical Properties of Additive Manufactured AISI 316L Stainless Steel by Plasma Met. Pág. 65-84. Mdpi. Mdpi. 2022.
Ariza, Enrique;Montealegre-Meléndez, Isabel;Arévalo-Mora, Cristina;Perez-Soriano, Eva Maria;Neubauer, Erich;Kitzmantel, Michael:
Plasma Metal Deposition for Metallic Materials. Pág. 1-14. IntechOpen. IntechOpen. 2021.
Montealegre-Meléndez, Isabel;Arévalo-Mora, Cristina;Beltrán-Custodio, Ana María;Kitzmantel, M;Neubauer, E;Perez-Soriano, Eva Maria:
Reaction layer analysis of in situ reinforced titanium composites: influence of the starting material composition on the mechanical properties. Pág. 191-202. Mdpi. Mdpi. 2021.
Perez-Soriano, Eva Maria;Arévalo-Mora, Cristina;Montealegre-Meléndez, Isabel:
In Situ Titanium Composites: XRD Study of Secondary Phases Tied to the Processing Conditions and Starting Materials. Pág. 1-17. INTECHOPEN. INTECHOPEN. 2019.
Perez-Soriano, Eva Maria;Montealegre-Meléndez, Isabel;Arévalo-Mora, Cristina;Neubauer, Erich;Kitzmantel, Michael:
Microstructural and XRD Analysis and Study of the Properties of the System Ti-TiAl-Ba4C Processed under Different Operational Conditions. Pág. 136-151. Mdpi. Mdpi. 2019.
Perez-Soriano, Eva Maria;Arévalo-Mora, Cristina;Montealegre-Meléndez, Isabel;Peña-muñoz, Ildefonso:
Implementation of a teaching unit from the standard secondary-school syllabus to secondary education for adults. Pág. 59-63. ScienceKNOW Conferences C.B.. ScienceKNOW Conferences C.B.. 2015.

Asistencia a congresos

García-García, Francisco José;Arévalo-Mora, Cristina;Perez-Soriano, Eva Maria;Montealegre-Meléndez, Isabel;Lozano-Suárez, Juan Gabriel:
Fabricación de cátodos para baterías de iones de litio mediante nuevas rutas sintéticas. Poster en Congreso. IX JORNADAS DE I+D+I & 1ST INTERNATIONAL WORKSHOP ON STEM. ESCUELA POLITÉCNICA SUPERIOR. 2022
Perez-Soriano, Eva Maria;Ariza-galván, Enrique;Arévalo-Mora, Cristina;Montealegre-Meléndez, Isabel;Kitzmantel, Michael;Neubauer, Erich:
Processing by Additive Manufacturing Based on Plasma Transferred Arc of Hastelloy in Air and Argon Atmosphere. Poster en Congreso. VII Jornada Investigación, Desarrollo e Innovación. Universidad de Sevilla. 2020
Montealegre-Meléndez, Isabel;Arévalo-Mora, Cristina;Ariza-galván, Enrique;Perez-Soriano, Eva Maria;Neubauer, Erich:
Desarrollo y estudio de piezas con geometrías complejas de aleaciones de titanio fabricadas a partir de polvo y alambre mediante la técnica aditiva de. Poster en Congreso. VII Jornada Investigación, Desarrollo e Innovación. Universidad de Sevilla. 2020
Ariza, Enrique;Montealegre-Meléndez, Isabel;Perez-Soriano, Eva Maria;Arévalo-Mora, Cristina;Bielik, Martin;Meuthen, John;Neubauer, Erich;Kitzmantel, Michael:
Study On Processing Nickel Alloy Hastelloy C-22 By Additive Manufacturing Technique Plasma Metal Deposition (PMD). Ponencia en Congreso. EUROPM 2020 Congress and Exhibition. ACCESO ONLINE. 2020
Ariza-galván, Enrique;Montealegre-Meléndez, Isabel;Perez-Soriano, Eva Maria;Arévalo-Mora, Cristina;Meuthen, John;Neubauer, Erich;Kitzmantel, Michael:
Processing Of 17-4PH By Additive Manufacturing Using A Plasma Metal Deposition (PMD) Technique. Poster en Congreso. EUROPM 2019. Maastricht, The Netherlands. 2019
Arévalo-Mora, Cristina;Perez-Soriano, Eva Maria;Montealegre-Meléndez, Isabel;Kitzmantel, Michael;Neubauer, Erich:
Secondary phases study in titanium matrix reinforced with TiB2. Poster en Congreso. EUROPM 2019. Maastricht, The Netherlands. 2019
Lloreda, Pedro Javier;Paúl-Escolano, Antonio;Sepúlveda-Ferrer, Ranier;Perez-Soriano, Eva Maria:
Desarrollo de Materiales Porosos de Ni a partir de Solidificación Direccional. Sesión no plenaria en Congreso. VII Congreso Español de Pulvimetalurgia y II Congreso Iberoamericano de Pulvimetalurgia. Madrid. 2019
Perez-Soriano, Eva Maria;Montealegre-Meléndez, Isabel;Arévalo-Mora, Cristina;Kitzmantel, Michael;Neubauer, Erich:
ESTUDIO COMPARATIVO DEL COMPORTAMIENTO DE DIFERENTES MATERIALES DE REFUERZO EN MATRICES DE TITANIO FABRICADOS POR RAPID SINTER PRESSING. Poster en Congreso. VII CONGRESO NACIONAL DE PULVIMETALURGIA, II CONGRESO IBEROAMERICANO DE PULVIMETALURGIA. Madrid, España. 2019
Montealegre-Meléndez, Isabel;Perez-Soriano, Eva Maria;Arévalo-Mora, Cristina;Kitzmantel, Michael;Neubauer, Erich:
PRELIMINARY STUDY OF THE PROCESSING PARAMETERS EFFECT ON THE MICROSTRUCTURE AND PROPERTIES OF TITANIUM GRADE 1 SPECIMENS FABRICATED VIA ADDITIVE MANUF. Ponencia en Congreso. METAL ADDITIVE MANUFACTURING CONFERENCE 2018. Viena, Austria / Vienna. 2018
Perez-Soriano, Eva Maria;Arévalo-Mora, Cristina;Montealegre-Meléndez, Isabel;Kitzmantel, Michael;Neubauer, Erich:
PRELIMINARY STUDY OF THE PROCESSING PARAMETERS EFFECT ON THE PROPERTIES OF Ti6Al4V SPECIMENS FABRICATED VIA ADDITIVE MANUFACTURING. Poster en Congreso. Euro PM2018 Congress & Exhibition. Bilbao, España. 2018
Montealegre-Meléndez, Isabel;Arévalo-Mora, Cristina;Perez-Soriano, Eva Maria;Neubauer, Erich;Kitzmantel, Michael:
Temperature effect on the properties of titanium matrices with 20%vol. Ti-Al, reinforced by 50% vol. of B4C. Comunicación en congreso. Euro PM2017. Milán, Italia.. 2017
Sepúlveda-Ferrer, Ranier;Perez-Soriano, Eva Maria;Lachen, Jaime;Herguido, Javier;Peña, Jose Angel:
Manufacturing of freeze-casting Fe-based porous materials assisted by a magnetic field for purifying. Sesión plenaria en Congreso. 10th International Conference on Porous Metals and Metallic Foams; Metfoam 2017. Nanjing, China.. 2017
Perez-Soriano, Eva Maria:
PIEZAS DE ALTA POROSIDAD OBTENIDAS MEDIANTE COMPACTACIÓN ISOSTÁTICA. Poster en Congreso. VI Congreso Nacional y I Congreso Iberoamericano de Pulvimetalurgia. Ciudad Real. 2017
Arévalo-Mora, Cristina;Perez-Soriano, Eva Maria;Montealegre-Meléndez, Isabel;Neubauer, E;Kitzmantel, M:
Influencia del polvo de partida en las propiedades finales de aleaciones W-Cu fabricadas mediante la técnica de rapid sinter pressing. Ponencia en Congreso. VI Congreso Nacional y I Congreso Iberoamericano de Pulvimetalurgia. Ciudad Real. 2017
Arévalo-Mora, Cristina;Neubauer, Erich;Montealegre-Meléndez, Isabel;Perez-Soriano, Eva Maria;Kitzmantel, Michael:
Influence of the particle size and raw materials in W-Cu alloys manufactured via rapid sinter pressing. Comunicación en congreso. World PM2016. Hamburgo, Alemania. 2016
Perez-Soriano, Eva Maria;Gallardo-Fuentes, Jose Maria:
Nickel sinterization with space holders: high porosity and minimum pore size. Comunicación en congreso. Advances in materials & processing technologies. - MADRID, ESPAÑA. 2015
Montealegre-Meléndez, Isabel;Arévalo-Mora, Cristina;Perez-Soriano, Eva Maria;Peña-muñoz, Ildefonso:
Approach of the Cooperative Learning method focus on students in their final year doing their degree final projects. Comunicación en congreso. International Congress of Education, Innovation and Learning Technologies (Iceilt). GRANADA SPAIN. 2015
Sepúlveda-Ferrer, Ranier;Perez-Soriano, Eva Maria;Gallardo-Fuentes, Jose Maria:
Fe-base Porous Material Created by Freeze-Casting to be Used as a LHP. Ponencia en Congreso. 9th International Conference on Porous Metals and Metallic Foams. . BARCELONA, ESPAÑA. 2015
Perez-Soriano, Eva Maria;Gallardo-Fuentes, Jose Maria:
Manufacturing nickel or stainless steel bodies with high porosity via Loose Sintering using space holders. Comunicación en congreso. 9th International Conference on Porous Metals and Metallic Foams. . BARCELONA, ESPAÑA. 2015
Perez-Soriano, Eva Maria;Gallardo-Fuentes, Jose Maria:
Fabricación de cuerpos de acero inoxidable con elevada porosidad a través de loose sintering. Comunicación en congreso. V CONGRESO NACIONAL DE PULVIMETALURGIA. GERONA, ESPAÑA. 2015
Sepúlveda-Ferrer, Ranier;Perez-Soriano, Eva Maria;Gallardo-Fuentes, Jose Maria:
Fabricación de materiales porosos base Fe mediante solidificación direccional. Poster en Congreso. V Congreso Nacional de Pulvimetalurgia. . 2015
Perez-Soriano, Eva Maria:
Determinación de porosidad en cuerpos obtenidos por Rapid Manufacturing. Ponencia en Congreso. 13º Congreso Nacional de Ensayos No Destructivos. ESCUELA TECNICA SUPERIOR DE INGENIEROS. 2015
Periñán, Antonio;Perez-Soriano, Eva Maria;Lasagni-, Fernando Adrián;Zorrilla-Fontanesi, Amadis;Calvo, Miguel;Gallardo-Fuentes, Jose Maria:
Manufacturing of porous and dense parts according the fabrication parameters by Additive Layer Manufacturing (ALM). Poster en Congreso. EUROMAT 2013 Conference. Seville, Spain. 2013
Perez-Soriano, Eva Maria;Lasagni-, Fernando Adrián;Gallardo-Fuentes, Jose Maria;Cintas-Fisico, Jesus:
Porosity Measurements in Laser Sintered Powder Parts. Comunicación en congreso. 2012 POWDER METALLURGY WORLD CONGRESS & EXHIBITION. YOKOHAMA. 2012
Neubauer, Erich;García, Luis;Perez-Soriano, Eva Maria;Kapaun, W.;Windisch, H.f.;Kitzmantel, Micahel:
A comparison of the microstructure and properties of copper-tungsten composites processed by Rapid Hot Pressing and Conventional Hot Pressing. Comunicación en congreso. EUROPM 2012 Congress and Exhibition. Basel, BASILEA (SUIZA). 2012
Perez-Soriano, Eva Maria;Gallardo-Fuentes, Jose Maria:
MÉTODOS DE CARACTERIZACIÓN DE POROSIDAD EN PIEZAS METÁLICAS OBTENIDAS POR SINTERIZACIÓN CON LÁSER. Comunicación en congreso. IV CONGRESO NACIONAL DE PULVIMETALURGIA. ETS de Ingenieros, Sevilla. 2012
Perez-Soriano, Eva Maria;Calvo, M.;Gallardo-Fuentes, Jose Maria;Lasagni-, Fernando Adrián:
ESTUDIO DE LA INFLUENCIA DE LOS PARAMETROS DE FABRICACIÓN PARA EL DESARROLLO DE CUERPOS POROSOS POR RAPID MANUFACTURING. Comunicación en congreso. IV CONGRESO NACIONAL DE PULVIMETALURGIA. ETS de Ingenieros, Sevilla. 2012
Arévalo-Mora, Cristina;Perez-Soriano, Eva Maria;Neubauer, Erich:
ESTUDIO DE LA INFLUENCIA DEL POLVO DE PARTIDA EN MATERIALES COMPUESTOS BASADOS EN MATRICES LIGERAS DE Ti6Al4V REFORZADOS CON NANOPARTICULAS. Poster en Congreso. IV CONGRESO NACIONAL DE PULVIMETALURGIA. ETS de Ingenieros, Sevilla. 2012
Perez-Soriano, Eva Maria;Gallardo-Fuentes, Jose Maria;Lasagni-, Fernando Adrián;Periñan, Antonio:
FABRICABILIDAD DE MICROESTRUCTURAS DENSAS EN AISI 316 L POR RAPID MANUFACTURING. Comunicación en congreso. IV CONGRESO NACIONAL DE PULVIMETALURGIA. ETS de Ingenieros, Sevilla. 2012
Perez-Soriano, Eva Maria;Gallardo-Fuentes, Jose Maria:
LOW DENSITY METALLIC ALLOYS BY ELECTRIC DISCHARGE SINTERING. Comunicación en congreso. VI INTERNATIONAL MATERIALS SYMPOSIUM. GUIMARAES, PORTUGAL. 2011
Perez-Soriano, Eva Maria;Gallardo-Fuentes, Jose Maria:
Observaciones sobre sinterización por descarga en condiciones de microgravedad. Poster en Congreso. III Congreso Nacional de Pulvimetalurgia. Valencia. 2010

Artículos publicados

Peceño, Begoña;Perez-Soriano, Eva Maria;Ríos, José David;Luna-Galiano, Yolanda;Cifuentes, H.;Leiva-Fernández, Carlos:
Morphological analysis of the porosity and sound absorption of sustainable materials from rice husk. Building acoustics. 2022. Vol: 29. Núm: 3. Pág. 387-399. 10.1177/1351010X2211036.
Ariza-galván, Enrique;Montealegre-Meléndez, Isabel;Perez-Soriano, Eva Maria;Neubauer, Erich;Kitzmantel, Michael;Arévalo-Mora, Cristina:
Influence of Processing Conditions on the Mechanical Properties of 17-4PH Specimens Produced by Additive Manufacturing. Machines: Machinery and Automation. 2022. Vol: 10. Núm: 11. 10.3390/machines10110976.
Elhadad, Amir A.;Alcudia, Ana;Begines, Belén;Perez-Soriano, Eva Maria;Torres-Hernández, Yadir:
A multidisciplinary perspective on the latest trends in artificial cartilage fabrication to mimic real tissue. Applied Materials Today. 2022. Vol: 29. 10.1016/j.apmt.2022.101603.
Lloreda, Pedro Javier;Perez-Soriano, Eva Maria;Paúl-Escolano, Antonio;Herguido, J.;Peña, J.a.;Sepúlveda-Ferrer, Ranier:
Doped iron oxide scaffolds with gradient porosity fabricated by freeze casting: pore morphology prediction and processing parameters. Materials Science and Technology. 2020. Vol: 36. Núm: 11. Pág. 1227-1237. 10.1080/02670836.2020.1765096.
Martinez , Guillermo;Merinero, Manuel ;Pérez-aranda, María ;Perez-Soriano, Eva Maria;Ortiz, Tamara;Villamor, Eduardo;Begines, Belén;Alcudia, Ana:
Environmental Impact of Nanoparticles: Application as an Emerging Technology: A Review. Materials. 2020. Vol: 14. Núm: 1. 10.3390/ma14010166.
Perez-Soriano, Eva Maria;Arévalo-Mora, Cristina;Montealegre-Meléndez, Isabel;Neubauer, Erich;Kitzmantel, Michael:
Influence of starting powders on the final properties of W-Cu alloys manufactured through rapid sinter pressing technique. Powder Metallurgy. 2020. Vol: 64. Pág. 75-81. 10.1080/00325899.2020.1847847.
Montealegre-Meléndez, Isabel;Arévalo-Mora, Cristina;Beltrán-Custodio, Ana María;Kitzmantel, M;Neubauer, E;Perez-Soriano, Eva Maria:
Reaction Layer Analysis of In Situ Reinforced Titanium Composites: Influence of the Starting Material Composition on the Mechanical Properties. Metals. 2020. Vol: 10. Núm: 2. doi:10.3390/met10020265.
Arévalo-Mora, Cristina;Ariza, Enrique;Perez-Soriano, Eva Maria;Kitzmantel, Michael;Neubauer, Erich;Montealegre-Meléndez, Isabel:
Effect of Processing Atmosphere and Secondary Operations on the Mechanical Properties of Additive Manufactured AISI 316L Stainless Steel by Plasma Met. Metals. 2020. Vol: 10. 10.3390/met10091125.
Perez-Soriano, Eva Maria;Ariza, Enrique;Arévalo-Mora, Cristina;Montealegre-Meléndez, Isabel;Kitzmantel, Michael;Neubauer, Erich:
Processing by Additive Manufacturing Based on Plasma Transferred Arc of Hastelloy in Air and Argon Atmosphere. Metals. 2020. Vol: 10. Núm: 2. 10.3390/met10020200.
Arévalo-Mora, Cristina;Montalegre, Isabel;Montealegre-Meléndez, Isabel;Perez-Soriano, Eva Maria;Kitzmantel, Michael;Neubauer, Erik:
Electron microscopy characterization of the reaction layer in titanium composites reinforced with B4C particles and the effect of the presence of alum. Materials Research Express. 2019. Vol: 6. https://doi.org/10.1088/2053-1591/ab450e.
Arévalo-Mora, Cristina;Montealegre-Meléndez, Isabel;Neubauer, Erich;Perez-Soriano, Eva Maria;Kitzmantel, Michael:
Powder-materials impact on nanoparticle-reinforced Ti-6Al-4V matrix composites produced via inductive hot pressing. International Journal of Materials and Product Technology. 2018. Vol: 56. Núm: 3. Pág. 207-219.
Montealegre-Meléndez, Isabel;Arévalo-Mora, Cristina;Perez-Soriano, Eva Maria;Kitzmantel, Michael;Neubauer, Erich:
Microstructural and XRD Analysis and Study of the Properties of the System Ti-TiAl-B4C Processed under Different Operational Conditions. Metals. 2018. Vol: 8. Núm: 5. 10.3390/met8050367.
Montealegre-Meléndez, Isabel;Arévalo-Mora, Cristina;Perez-Soriano, Eva Maria;Neubauer, Erich;Rubio-Escudero, Cristina;Kitzmantel, Michael:
Analysis of the Influence of Starting Materials and Processing Conditions on the Properties of W/Cu Alloys. Materials. 2017. Vol: 10. Núm: 142. Pág. 1-11. doi:10.3390/ma10020142.
Montealegre-Meléndez, Isabel;Arévalo-Mora, Cristina;Ariza, Enrique;Perez-Soriano, Eva Maria;Rubio-Escudero, Cristina;Kitzmantel, Michael;Neubauer, Erich:
Analysis of the Microstructure and Mechanical Properties of Titanium-Based Composites Reinforced by Secondary Phases and B4C Particles Produced via Di. Materials. 2017. Vol: 10. Núm: 11. 10.3390/ma10111240.
Arévalo-Mora, Cristina;Montealegre-Meléndez, Isabel;Perez-Soriano, Eva Maria;Ariza, Enrique;Kitzmantel, Michael;Neubauer, Erich:
Study of the Influence of TiB Content and Temperature in the Properties of In Situ Titanium Matrix Composites. Metals. 2017. Vol: 7. Núm: 11. Pág. 1-13. 10.3390/met7110457.

Patentes

Montes-Martos, Juan Manuel;Gallardo-Fuentes, Jose Maria;Perez-Soriano, Eva Maria: Procedimiento de fabricación de material metálico de alta porosidad en condiciones de imponderabilidad. Número de patente: ES-2506490_A1