ANTONIO BLAZQUEZ GAMEZ

Categoría
Catedrático de Universidad

Contacto

Correo electrónico
Área
Mecánica de Medios Continuos y T. de Estructuras

Investigación

Grupo de investigación

ELASTICIDAD Y RESISTENCIA DE MATERIALES (ELASTICIDAD Y RESISTENCIA DE M)

Proyectos y contratos de investigación

PREDICCIÓN DE FALLO EN MATERIALES COMPUESTOS USADOS EN LA INDUSTRIA AERONÁUTICA APLICANDO LA MECÁNICA DE LA FRACTURA DE GRIETAS DE INTERFASE (EXC/2005/TEP-1207 - Investigador/a)
DESARROLLO DE MODELOS COHESIVOS Y DE MECÁNICA DE LA FRACTURA PARA EL ESTUDIO DE UNIONES COCURADAS Y COPEGADAS DE MATERIALES COMPUESTOS (P06-TEP-02045 - Investigador/a)
PREDICCIÓN DE DAÑO Y FRACTURA EN PANELES DE MATERIALES COMPUESTOS USADOS EN LA INDUSTRIA AERONÁUTICA EN RÉGIMEN DE POSTPANDEO (TRA2006-08077 - Investigador/a)
GENERACIÓN DIRECTA DE VAPOR A MÁS DE 500 ºC (GDV-500-PLUS) ELASTICIDAD Y RESISTENCIA DE MATERIALES (GDV-500-PLUS - Responsable)
DAICA ALA-EADS (PI-0016/2008 - Investigador/a)
RENFE TUNEL ABDALAJIS (PI-0105/2008 - Investigador/a)
PANELES RIGIDIZADOS DE FIBRA DE CARBONO (PI-0675/2008 - Responsable)
ACTIVE (PI-1754/13/2017 - Investigador/a)
DOVER (SI-1782/13/2018 - Investigador/a)
Becario F.P.I. ( - Participante)
Modelo probabilístico para cálculo de placas de vidrio laminado: propuesta de norma para edificación (BIA2005-03143 - Investigador/a)
Caracterización de uniones adhesivas metal-metal, metal-composite y composite-composite (MAT2003-03315 - Investigador/a)
Estudio numérico con elementos de contorno de las condiciones de los ensayos para la determinación de la tenacidad a fractura en modo II y modo mixto (ANGI 2003/06 - Responsable)
Desarrollo de criterios de fallo de materiales compuestos fibrosos basados en mecanismos de fallo. Estudio micromecánico (MAT2000-1115 - Investigador/a)
Comportamiento de las grietas de interface entre materiales anisótropos diferentes sometidos a cargas térmicas y mecánicas transitorias (PB98-1118 - Investigador/a)
GDV-500-PLUS: Generación directa de vapor a por encima de 500ºC (PI-0004/13/07 - Investigador Principal Consolidado)
Estudio numérico y experimental de tensiones y deformaciones residuales en chapas soldadas. predicción y alivio (MAT97-0564 - Investigador/a)
Análisis tensional de materiales no isótropos con el método de los elementos de contorno. consideración de problemas de contacto y singularidades (PB96-1335 - Investigador/a)
Evaluación de la viabilidad de estudiar uniones soldadas no coplanarias mediante modelos de barras con inclusión de la fluencia lenta (MAT96-2361-E - Investigador/a)
Estudio de la interface para mejora de las propiedades en materiales compuestos de fibra de carbono (MAT95-1672-E - Investigador/a)
Determinación del Módulo de cizalladura intralaminar G12 en materiales compuestos grafito-epoxy (IN94-0610 - Investigador/a)
Determinación del módulo de cizalladura intralaminar G12 en materiales compuestos grafito-epoxi mediante los ensayos Off-axis e Iosipescu (MAT94-0480 - Investigador/a)
Sistema integrado de diseño óptimo de componentes mecánicos mediante el M.E.C (1495 - Investigador/a)
Advanced and Low Cost Aircraft Structures (ALCAS) (AIP-4-CT-2005-516092 - Investigador Principal Consolidado)
ELBENet -- Europe Latin-American Boundary Element Network (AML/B7-311/97/0666/II-0235-A - Investigador/a)
Plasma polymerised coating and interphases for improved performance of carbon fibre composite (PLASMA CFRP) (BRE2-0453/BE5542 - Investigador/a)
DUPLEXFIN_ACERINOX (PI-1685/13/2017 - Investigador/a)
GAIN (Grading upo Aerostructures for improved Nacells) (PI-1548/13/2016 - Investigador/a)
ESTENEA (EStudio de TEcNologías de bajo costE y Altas cadencias en composites) (ES-1492/13/2015 - Investigador/a)
SAFE (desarrollo de Sistemas Avanzados de certificación sobre paneles de FuselajE) (ES-1491/13/2015 - Investigador/a)
NUREMCO (Nuevas Tecnologías de Refuerzo en Materiales Compuestos) (PI-1198/2013 - Responsable)
Diseño y Comprobación de una estructura de Aluminio (PI-0896/2011 - Responsable)
Proyecto DEPLA (PI-0848/2011 - Investigador/a)
Nuevos Enfoques de la Mecánica de la Fractura Computacional para la Caracterización de Inicio y Crecimiento de Grietas en Materiales Compuestos en Dif (MAT2015-71036-P - Responsable)
Elementos Laminares Avanzados para Análisis no Lineales de Paneles de Material Compuesto (DPI2012-37187 - Responsable)
Análisis del Comportamiento de Paneles Rigidizados de Material Compuesto en Régimen de Postpandeo (P11-TEP-7093 - Responsable)
ESTENEA (EStudio de TEcNologías de bajo costE y Altas cadencias en composites) (ES-1492/13/2015 - Investigador/a)
Modelling multiple transverse cracking in composite laminates (IE141234 - Investigador/a)
Proyecto DEPLA (PI-0848/2011 - Investigador/a)
Análisis del Comportamiento de Paneles Rigidizados de Material Compuesto en Régimen de Postpandeo (P11-TEP-7093 - Responsable)
Elementos Laminares Avanzados para Análisis no Lineales de Paneles de Material Compuesto (DPI2012-37187 - Responsable)
Análisis numérico de las causas de agrietamiento de un molde para ánados (Investigador/a)

Libros publicados

Blázquez-Gámez, Antonio M.:
ESTRUCTURAS DE ACERO. LÓPEZ & DA VINCI. 2004. 84-95416-08-5
Blázquez-Gámez, Antonio M.:
TEORÍA DE ESTRUCTURAS. CÁLCULO MATRICIAL. MÉTODO DIRECTO DE RIGIDEZ. LÓPEZ & DA VINCI. 2004. 84-95416-06-9
Blázquez-Gámez, Antonio M.:
PLACAS. LÓPEZ & DA VINCI. 2004. 84-95416-07-7
Cañas-Delgado, José;Paris-Carballo, Federico;Blázquez-Gámez, Antonio M.:
PROBLEMAS DE EXÁMENES DE ELASTICIDAD. ESCUELA SUPERIOR DE INGENIEROS. UNIVERSIDAD DE SEVILLA. 1996. 84-88783-17-5

Capítulos en Libros

Reinoso-Cuevas, José Antonio;Blázquez-Gámez, Antonio M.;Paris-Carballo, Federico:
Damage simulations in Composite Structures in the Presence of Stress Gradients.. Pág. 391-424. Woodhead Publishing (Elsevier). Woodhead Publishing (Elsevier). 2016.
Paris-Carballo, Federico;Blázquez-Gámez, Antonio M.;Graciani-Díaz, Enrique;Correa-Montoto, Elena;Mantic-Lescisin, Vladislav:
PROBLEMAS DE CONTACTO EN EL ESTUDIO DEL DAÑO EN MATERIALES COMPUESTOS FIBROSOS. SECRETARIADO DE PUBLICACIONES DE LA UNIVERSIDAD DE VALLADOLID. SECRETARIADO DE PUBLICACIONES DE LA UNIVERSIDAD DE VALLADOLID. 2007.
Mantic-Lescisin, Vladislav;Blázquez-Gámez, Antonio M.;Correa-Montoto, Elena;Paris-Carballo, Federico:
ANALYSIS OF INTERFACE CRACKS WITH CONTACT IN COMPOSITES BY 2D BEM. Pág. 189-248. En: 1. Wit Press. Wit Press. 2006.
Reinoso-Cuevas, José Antonio;Paggi, Marco;Blázquez-Gámez, Antonio M.:
A modeling framework for the analysis of instabilities and delamination in composite shells..

Participación en congresos

Blázquez-Gámez, Antonio M.:
10th World Conference on Computation Mechanics. Campinas, Sao Paulo, Brasil. 2012

Asistencia a congresos

Barroso-Caro, Alberto;Sánchez-Carmona, Serafín;Velasco, María Luisa;Blázquez-Gámez, Antonio M.;Cañas-Delgado, José;Paris-Carballo, Federico;Ponce, Benito;Cerrato, Roberto:
Testing of composite stiffened panels made by Resin Infusion. Ponencia en Congreso. 11th International Conference on Composites Testing and Model Identification. Girona. 2023
Blázquez-Gámez, Antonio M.;Barroso-Caro, Alberto;Velasco, María Luisa;Sánchez-Carmona, Serafín;Paris-Carballo, Federico;Ponce, Benito;Cerrato, Roberto:
Ensayo de flexión en 7 puntos sobre paneles rigidizados fabricados por infusión. Ponencia en Congreso. XIV Congreso Nacional de Materiales Compuestos. Escuela Técnica Superior de Ingeniería UNIVERSIDAD DE SEVILLA. 2022
Távara-Mendoza, Luis;Reinoso-Cuevas, José Antonio;Blázquez-Gámez, Antonio M.;Mantic-Lescisin, Vladislav:
A computational implementation of 3D mixed-mode fracture criteria which are invariant with respect to the reference system. Ponencia en Congreso. 22nd European Conference on Fracture. Belgrado, BELGRADE, BELGRADE (SERBIA). 2018
Blázquez-Gámez, Antonio M.;Justo-Estebaranz, Jesús;Reinoso-Cuevas, José Antonio;Paris-Carballo, Federico:
Procedure for the Estimation of the Shape Imperfections of a Composite Panel in order to Reproduce its Postbuckling Evolution. Ponencia en Congreso. 18th European Conference on Composite Materials. Atenas, Grecia. 2018
Estefani-Morales, Alejandro;Blázquez-Gámez, Antonio M.;Cañas-Delgado, José;Paris-Carballo, Federico:
Ensayos numéricos de uniones adhesivas composite-composite para la determinación de la tenacidad a la fractura. Ponencia en Congreso. CONGRESO BIENAL DE MATERIALES COMPUESTOS. - San Sebastián, Donosti. 2017
Graciani-Díaz, Enrique;Blázquez-Gámez, Antonio M.;Justo-Estebaranz, Jesús;Paris-Carballo, Federico:
Modelling thermal deformations in curved composite laminates using standard shell finite elements. Ponencia en Congreso. 17th European Conference on Composite Materials. Alemania, MÜNCHEN (MUNICH), ALEMANIA. 2016
Blázquez-Gámez, Antonio M.;Reinoso-Cuevas, José Antonio;Paris-Carballo, Federico:
Damage simulations in a composite ¿-stiffened panel in postbuckling regime. Comunicación en congreso. 17th European Conference on Composite Materials (ECCM17). MUNICH (GERMANY). 2016
Reinoso-Cuevas, José Antonio;Paggi, M;Blázquez-Gámez, Antonio M.:
A finite thickness interface element for composite delamination. Comunicación en congreso. 17th European Conference on Composite Materials (ECCM17). MUNICH (GERMANY). 2016
Reinoso-Cuevas, José Antonio;Blázquez-Gámez, Antonio M.;Paris-Carballo, Federico:
Análisis de postpandeo de un panel rigidizado de material compuesto mediante técnicas de modelado mul-ti-global-local incluyendo daño interlaminar. Comunicación en congreso. XI Congreso Nacional de Materiales Compuestos. Móstoles (Madrid). 2015
Blázquez-Gámez, Antonio M.;Justo-Estebaranz, Jesús;Roig, R;Paris-Carballo, Federico:
Experimental postbuckling study of pre-conformed composite plates. Comunicación en congreso. 20th International Conference on Composite Materials. Copenhagen, Dinamarca. 2015
Pastorino-junquero, Daniel;Blázquez-Gámez, Antonio M.;López, B.;Correa-Montoto, Elena;Paris-Carballo, Federico;Montes, A.:
Stress analysis of finite anisotropic plates with cutouts under displacement boundary conditions. Comunicación en congreso. XI Congreso Nacional de Materiales Compuestos. Móstoles (Madrid). 2015
Mesa, M. J.;Naranjo, J.;Macías, M.;León-godino, Rafael;Justo-Estebaranz, Jesús;Blázquez-Gámez, Antonio M.;Paris-Carballo, Federico;Cañas-Delgado, José;Escriba, S.:
Caracterización de uniones material compuesto-hormigón mediante ensayos de pelado, tracción plana y cortadura. Comunicación en congreso. XI Congreso Nacional de Materiales Compuestos. Móstoles (Madrid). 2015
Roig, Rafael;Justo-Estebaranz, Jesús;Blázquez-Gámez, Antonio M.;Paris-Carballo, Federico:
Estudio experimental de placas preconformadas en postpandeo. Comunicación en congreso. XI Congreso Nacional de Materiales Compuestos. Móstoles (Madrid). 2015
Pastorino, Daniel;Blázquez-Gámez, Antonio M.;Reinoso-Cuevas, José Antonio;Paris-Carballo, Federico:
Composite plates modeling strategies for the estimation of transverse stresses. Comunicación en congreso. 16th European Conference on Composite Materials ECCM16. Seville, Spain. 2014
Estefani-Morales, Alejandro;Blázquez-Gámez, Antonio M.;Reinoso-Cuevas, José Antonio;Paris-Carballo, Federico;Cañas-Delgado, José:
Failure analysis of a CFRP run-out configuration with butt-strap joint. Comunicación en congreso. 16th European Conference on Composite Materials. . 2014
Gómez, Blanca;Reinoso-Cuevas, José Antonio;Justo-Estebaranz, Jesús;Blázquez-Gámez, Antonio M.:
Failure analysis of skin-stringer interfaces. Comunicación en congreso. 16th European Conference on Composite Materials, ECCM 2014. Sevilla. 2014
González-cantero, Juan Manuel;Graciani-Díaz, Enrique;Blázquez-Gámez, Antonio M.;Paris-Carballo, Federico:
Analytic evaluation of radial stresses in unfolding failure of composite materials. Comparison with numerical solutions. Comunicación en congreso. 16th European Conference on Composite Materials ECCM16. Seville, Spain. 2014
Graciani-Díaz, Enrique;Blázquez-Gámez, Antonio M.;Cañas-Delgado, José;Paris-Carballo, Federico:
Analytical and numerical models for predicting unfolding failure in composite beams. Comunicación en congreso. 16th European Conference on Composite Materials ECCM16. Seville, Spain. 2014
Graciani-Díaz, Enrique;Blázquez-Gámez, Antonio M.;Cañas-delgado, Jose;Paris-Carballo, Federico:
Modelos analíticos y numéricos para la predicción del fallo por unfolding en vigas de material compuesto. Comunicación en congreso. X CONGRESO NACIONAL DE MATERIALES COMPUESTOS. Algeciras, Cádiz. 2013
Blázquez-Gámez, Antonio M.;Paris-Carballo, Federico:
Postbuckling analysis of a composite cylindrical panel with frames and omega stringers. Comunicación en congreso. 19th International Conference on Composite Materials. Montreal, Canada. 2013
Blázquez-Gámez, Antonio M.;Reinoso-Cuevas, José Antonio;Cañas-Delgado, José;Paris-Carballo, Federico:
Análisis de la capacidad postpandeo de un panel rigidizado ante cargas de presión.. Comunicación en congreso. X CONGRESO NACIONAL DE MATERIALES COMPUESTOS. ALgeciras, Cádiz. 2013
Reinoso-Cuevas, José Antonio;Blázquez-Gámez, Antonio M.;Paris-Carballo, Federico;Irslinger, J;Ramm, E:
On different shell modeling in numerical analyses of a composite stiffened panel under uniform pressure. Comunicación en congreso. 10th World Conference on Computation Mechanics. Campinas, Sao Paulo, Brasil. 2012
Távara-Mendoza, Luis;Blázquez-Gámez, Antonio M.;Mantic-Lescisin, Vladislav;Graciani-Díaz, Enrique;Paris-Carballo, Federico:
STUDY OF TRANSVERSE AND DELAMINATION CRACKS IN [0/90] SYMMETRIC LAMINATES BY MEANS OF THE CLASSICAL LEFM AND THE LINEAR ELASTIC BRITTLE INTERFACE FORM. Ponencia en Congreso. 15th EUROPEAN CONFERENCE ON COMPOSITE MATERIALS. VENECIA, ITALIA. 2012
García-García, Israel;Mantic-Lescisin, Vladislav;Blázquez-Gámez, Antonio M.;Paris-Carballo, Federico:
Size effect on transverse crack initiation in cross-ply laminates. Application of a coupled stress and energy criterion. Ponencia en Congreso. 15th European Conference on Composite Materials. VENECIA, ITALIA. 2012
Reinoso-Cuevas, José Antonio;Blázquez-Gámez, Antonio M.;Paris-Carballo, Federico:
On the use of three dimensional material laws in the analyses of functionally graded shells. Ponencia en Congreso. 15th EUROPEAN CONFERENCE ON COMPOSITE MATERIALS. VENECIA, ITALIA. 2012
Reinoso-Cuevas, José Antonio;Blázquez-Gámez, Antonio M.;Estefani-Morales, Alejandro;Paris-Carballo, Federico;Cañas-Delgado, José;Arevalo, E;Cruz, Francisco:
Mechanical response of a composite stiffner runout specimen including damge processes at the skin-stringer interfaces. Comunicación en congreso. 1st International Conference on Mechanics of Nano Micro and Macro Composite Structures. Turín, Italia. 2012
Blázquez-Gámez, Antonio M.;Reinoso-Cuevas, José Antonio;Paris-Carballo, Federico;Estefani-Morales, Alejandro;Arévalo, E;Cruz, F:
Analysis of a stringer run-out concept including damage initiation and evolution at the interfaces. Ponencia en Congreso. 15th EUROPEAN CONFERENCE ON COMPOSITE MATERIALS. VENECIA, ITALIA. 2012
Mantic-Lescisin, Vladislav;Blázquez-Gámez, Antonio M.;Graciani-Díaz, Enrique;Paris-Carballo, Federico:
ESTUDIO DE GRIETAS TRANSVERSALES Y DE DELAMINACION EN LAMINADOS SIMETRICOS [0/90] DE MATERIAL COMPUESTO USANDO LA FORMULACION DE INTERFASE ELASTICA LI. Ponencia en Congreso. XXIX Encuentro del Grupo Español de Fractura. BILBAO. 2012
Blázquez-Gámez, Antonio M.;Reinoso-Cuevas, José Antonio;Paris-Carballo, Federico;Cañas-Delgado, José:
Análisis de postpandeo de un panel rigidizado de material compuesto sometido a carga de presión. Comunicación en congreso. IX CONGRESO NACIONAL DE MATERIALES COMPUESTOS. BARCELONA-GERONA. 2011
García-García, Israel;Mantic-Lescisin, Vladislav;Blázquez-Gámez, Antonio M.;Paris-Carballo, Federico:
Aplicación de un criterio acoplado de tensión y energía al inicio de una grieta transversal en laminados [0m,90n]S sometidos a tensión longitudinal. Comunicación en congreso. 9º Congreso Nacional de Materiales Compuestos . Girona (España). 2011
Reinoso-Cuevas, José Antonio;París-carballo, Federico;Cruz, Francisco;Blázquez-Gámez, Antonio M.:
Influence of the modelization of frames on the analysis of a compressed cylindrical stiffened panel. Comunicación en congreso. International Conference in composite Structures 16. Oporto, Portugal. 2011
Reinoso-Cuevas, José Antonio;Blázquez-Gámez, Antonio M.;Paris-Carballo, Federico;Ramm, E:
Implementation of composite 7-parameters formulation of shell elements applying user subroutine UEL. Comunicación en congreso. 16th International Conference on Composite Structures. Oporto, Portugal. 2011
Graciani-Díaz, Enrique;Varna, Janis;Mantic-Lescisin, Vladislav;Blázquez-Gámez, Antonio M.;Paris-Carballo, Federico:
Influence of transverse properties in the modeling of debond propagation in single carbon fiber composites. Ponencia en Congreso. 32nd Risoe International Symposium on Material Science. Roskilde, Dinamarca. 2011
Reinoso-Cuevas, José Antonio;Blázquez-Gámez, Antonio M.;Estefani-Morales, Alejandro;Paris-Carballo, Federico;Cruz-Domínguez,Francisco:
COMPARACIÓN DE LAS OPCIONES SUBMODELING Y COUPLING SHELL-TO-SOLID EN ANÁLISIS GLOBAL-LOCAL DE UN ELEMENTO DE MATERIAL COMPUESTO INCLUYENDO LA DEGRADAC. Comunicación en congreso. REUNIÓN DE USUARIOS DE SIMULIA (15) (15.2010.MADRID). . 2010
Graciani-Díaz, Enrique;Blázquez-Gámez, Antonio M.;Paris-Carballo, Federico;Varna, Janis:
Numerical analysis of the single fibre fragmentation test using cohesive elements. Ponencia en Congreso. 14th European Conference on Composite Materials. Budapest, Hungría. 2010
Mccartney-,N.L.;Blázquez-Gámez, Antonio M.:
DELAMINATION MODEL FOR CROSS-PLY LAMINATES SUBJECT TO TRIAXIAL LOADING AND THERMAL STRESSES. Comunicación en congreso. INTERNATIONAL CONFERENCE ON COMPOSITE MATERIALS (17) (17.2009.EDIMBURGO (REINO UNIDO)). EDIMBURGO (REINO UNIDO). 2009
Reinoso-Cuevas, José Antonio;Blázquez-Gámez, Antonio M.;Paris-Carballo, Federico:
ANALISIS NUMERICO DE PANDEO DE PANELES RIGIDIZADOS DE MATERIAL COMPUESTO. Comunicación en congreso. COMATCOMP 09 (8) (8.2009.SAN SEBASTIAN). SAN SEBASTIAN. 2009
Blázquez-Gámez, Antonio M.;Paris-Carballo, Federico;Barroso-Caro, Alberto;Mantic-Lescisin, Vladislav;Mccartney, L. Neil:
Evaluation of the elastic Energy Release Rates of transverse and delamination cracks in [0/90] carbon-epoxy symmetric laminates. Comunicación en congreso. ICCM-17 17Th INTERNATIONAL CONFERENCE ON COMPOSITE MATERIALS. EDINBURGH , UK. 2009
Blázquez-Gámez, Antonio M.;Paris-Carballo, Federico;Mantic-Lescisin, Vladislav;Mccartney-,N.L.:
EVALUATION OF THE ELASTIC ENERGY RELEASE RATE OF TRANSVERSE AND DELAMINATION CRACKS IN [0/90]S CARBON-APOXY SYMMETRIC LAMINATES. Comunicación en congreso. INTERNATIONAL CONFERENCE ON COMPOSITE MATERIALS (17) (17.2009.EDIMBURGO (REINO UNIDO)). EDIMBURGO (REINO UNIDO). 2009
Real-,Mª M.;Blázquez-Gámez, Antonio M.;Graciani-Díaz, Enrique;Cañas-Delgado, José;Paris-Carballo, Federico:
SIMULACION NUMERICA Y RESULTADOS EXPERIMENTALES DEL ENSAYO A TRACCION DE UN PANEL RIGIDIZADO DE MATERIAL COMPUESTO. Comunicación en congreso. COMATCOMP 09 (8) (8.2009.SAN SEBASTIAN). SAN SEBASTIAN. 2009
Mccartney-,N.L.;Blázquez-Gámez, Antonio M.:
VALIDATING, USING BEM, A MODEL FOR PLY CRACKS IN CROSS-PLY LAMINATES SUBJECT TO COMBINED IN-PLANE LOADING AND OUT-OF-PLANE BENDING. Comunicación en congreso. 10TH INTERNATIONAL CONFERENCE ON BOUNDARY ELEMENT TECHNIQUES. BETEQ-2009 () (.2009.ATENAS (GRECIA)). ATENAS (GRECIA). 2009
Curiel-,F.;Graciani-Díaz, Enrique;Blázquez-Gámez, Antonio M.;Paris-Carballo, Federico:
ANALISIS NUMERICO DEL ENSAYO DE FRAGMENTACIÓN DE FIBRA UNICA, EMPLEANDO ELEMENTOS COHESIVOS.. Ponencia en Congreso. COMATCOMP 09 (8) (8.2009.SAN SEBASTIAN). SAN SEBASTIAN. 2009
Blázquez-Gámez, Antonio M.;Paris-, Federico:
SMALL-DISPLACEMENT CONTACT PROBLEMS WHERE NON-CONFORMING ALGORITHMS ARE NEEDED. Comunicación en congreso. 10TH INTERNATIONAL CONFERENCE ON BOUNDARY ELEMENT TECHNIQUES. BETEQ-2009 () (.2009.ATENAS (GRECIA)). ATENAS (GRECIA). 2009
Reinoso-Cuevas, José Antonio;Blázquez-Gámez, Antonio M.;Paris-Carballo, Federico:
ANALISIS NUMERICO DE POSTPANDEO DE PANELES RIGIDIZADOS DE MATERIAL COMPUESTO. Comunicación en congreso. COMATCOMP 09 (8) (8.2009.SAN SEBASTIAN). SAN SEBASTIAN. 2009
Paris-Carballo, Federico;Blázquez-Gámez, Antonio M.;Mantic-Lescisin, Vladislav;Mccartney-,N.L.:
EVALUATION OF THE ELASTIC ENERGY RELEASE RATE OF DELAMINATION CRACKS IN [0/90] SYMMETRIC LAMINATES. Comunicación en congreso. EUROPEAN CONFERENCE ON COMPOSITE MATERIALS (13) (13.2008.ESTOCOLMO (SUECIA)). ESTOCOLMO (SUECIA). 2008
Estefani-Morales, Alejandro;Cañas-Delgado, José;Blázquez-Gámez, Antonio M.;Paris-Carballo, Federico:
ESTUDIOS PRELIMINARES PARA DEFINIR UN NUEVO ENSAYO DE PELADO EN UNIONES ADHESIVAS COMPOSITE-COMPOSITE.. Ponencia en Congreso. MATERIALES COMPUESTOS 07 () (.2007.VALLADOLID). VALLADOLID. 2007
Paris-Carballo, Federico;Blázquez-Gámez, Antonio M.;Graciani-Díaz, Enrique;Correa-Montoto, Elena;Mantic-Lescisin, Vladislav:
PROBLEMAS DE CONTACTO EN EL ESTUDIO DEL DAÑO EN MATERIALES COMPUESTOS FIBROSOS.. Ponencia en Congreso. AVANCES EN MECÁNICA DE MEDIOS CONTINUOS SIMPOSIUM EN HONOR AL PROFESOR J.A. GARRIDO GARCÍA. () (.2007.VALLADOLID). VALLADOLID. 2007
Blázquez-Gámez, Antonio M.;Picón-Carrizosa, Rafael:
MODELOS ANALITICOS Y NUMERICOS DEL POSTPANDEO DE PLACAS ORTÓTROPAS.. Comunicación en congreso. MATERIALES COMPUESTOS 07 () (.2007.VALLADOLID). VALLADOLID. 2007
Fernández, D;Kalthoff, J.f.;Blázquez-Gámez, Antonio M.;Fernández- Canteli, A:
Singular Stress Fields Situations in Mode-II and Mixed-Mode Loaded Cracks. Ponencia en Congreso. 16th European Conference of Fracture. Proceedings. ALEXANDROUPOLIS, GRECIA. 2006
Blázquez-Gámez, Antonio M.;Mantic-Lescisin, Vladislav;Paris-Carballo, Federico:
A PROCEDURE TO SOLVE GENERALIZED PLANE PROBLEMS WITH CONTACT USING A 2D BEM CODE.. Ponencia en Congreso. ADVANCES IN BOUNDARY ELEMENT TECHNIQUES VII, BETEQ () (.2006.PARIS, FRANCIA). PARIS, FRANCIA. 2006
Paris-Carballo, Federico;Correa-Montoto, Elena;Blázquez-Gámez, Antonio M.;Mantic-Lescisin, Vladislav:
APPLICATION OF INTERFACIAL FRACTURE MECHANICS TO THE FAILURE OF FIBROUS COMPOSITE BY BEM.. Ponencia en Congreso. SIMULACIÓN Y MODELADO EN INGENIERÍA Y CIENCIAS (SOCIEDAD VENEZOLANA DE MÉTODOS NUMÉRICOS EN INGENIERÍA), CONFERENCIA PLENARIA. () (.2006.ISLA MARGARIT. ISLA MARGARITA, VENEZUELA. 2006
Fernández-Zúñiga,Daniel;Blázquez-Gámez, Antonio M.;Kalthoff-,J.F.;Fdez.-Canteli,A.:
CAMPOS DE TENSIÓN SINGULARES Y CONDICIONES DE INESTABILIDAD EN MODO-II. Comunicación en congreso. ENCUENTRO DEL GRUPO ESPAÑOL DE FRACTURA () (.2005.ALMAGRO). ALMAGRO. 2005
Paris-Carballo, Federico;Mantic-Lescisin, Vladislav;Blázquez-Gámez, Antonio M.;Correa-Montoto, Elena:
INTERFACIAL FRACTURE MECHANICS IN COMPOSITE MATERIALS.. Comunicación en congreso. 9TH PORTUGUESE CONFERENCE ON FRACTURE. () (.2004.SETÚBAL, PORTUGAL). SETÚBAL, PORTUGAL. 2004
Kalthoff-,J.F.;Palomino-Marín,Mª Isabel;Fdez.-Canteli,A.;Blázquez-Gámez, Antonio M.:
APPLICATION OF THE BEM FOR DETERMINING SINGULAR STRESS FIELDS FOR THE CONDITIONS OF FAILING MODE-II CRACKS (INVITED PAPER). Comunicación en congreso. FIFTH INTERNATIONAL CONFERENCE ON BOUNDARY ELEMENT TECHNIQUES () (.2004.LISBOA, PORTUGAL). LISBOA, PORTUGAL. 2004
Paris-Carballo, Federico;Blázquez-Gámez, Antonio M.;Mantic-Lescisin, Vladislav:
CARACTERIZACIÓN DEL DAÑO DE ACUERDO A LA MECÁNICA DE LA FRACTURA EN LAMINADOS 0/90.. Comunicación en congreso. XXI ENCUENTRO DEL GRUPO ESPAÑOL DE FRACTURA () (.2004.PUNTA UMBRIA (HUELVA)). PUNTA UMBRIA (HUELVA). 2004
Blázquez-Gámez, Antonio M.;Kalthoff-,J.F.;Palomino-Marín,Mª Isabel;Fdez.-Canteli,A.:
NUMERICAL CALCULATIONS OF THE SINGULAR STRESS FIELDS OF FAILING MODE-II CRACKS IN COMPARISON TO EXPERIMENTS. Comunicación en congreso. INTERNATIONAL CONFERENCE ON COMPUTATIONAL & EXPERIMENTAL ENGINEERING & SCIENCE . ICCES'04 () (.2004.MADEIRA, PORTUGAL). MADEIRA, PORTUGAL. 2004
Morales, P;Blázquez-Gámez, Antonio M.;Fernández, D;Kalthoff, J.f.:
Investigation on the suitability of a test method for determining mode-II fracture tougnesses using boundary element analysis. Comunicación en congreso. International Conference in Boundary Element Techniques. Granada (España). 2003
Paris-Carballo, Federico;Mantic-Lescisin, Vladislav;Blázquez-Gámez, Antonio M.;Mccartney-,N.L.:
EVALUACIÓN DEL ÍNDICE DE LIBERACIÓN DE ENERGÍA EN GRIETAS DE DELAMINACIÓN EN LAMINADOS 0/90 SIMÉTRICOS.. Comunicación en congreso. CO0NGRESO NACIONAL DE MATERIALES COMPUESTOS (5.2003.ZARAGOZA). . 2003
Blázquez-Gámez, Antonio M.;Morales-Ortiz,Pilar;Fernández-Zúñiga,Daniel;Kalthoff-,J.F.:
INVESTIGACION ON THE SUITABILITY OF A TEST METHOD FOR DETERMINING MODE-II FRACTURE TOUGNESSES USING BOUNDARY ELEMENT ANALYSIS. Comunicación en congreso. INTERNATIONAL CONFERENCE ON BOUNDARY ELEMENT TECHNIQUES (4.2003.GRANADA). GRANADA. 2003
Vodicka-,R.;Blázquez-Gámez, Antonio M.;Paris-Carballo, Federico;Mantic-Lescisin, Vladislav:
COMPARING THE CONVENTIONAL DISPLACEMENT, FIRST-KIND AND SECOND-KIND BIES IN FRICTIONLESS CONTACT PROBLEMS. Ponencia en Congreso. INTERNATIONAL CONFERENCE ON THE BOUNDARY ELEMENT METHOD (24.2002.SINTRA, PORTUGAL). SINTRA, PORTUGAL. 2002
Mantic-Lescisin, Vladislav;Blázquez-Gámez, Antonio M.;Paris-Carballo, Federico;Mccartney-,N.L.:
ANALYSIS OF DELAMINATION CRACKS IN 0/90 SYMMETRIC LAMINATES BY BEM.. Ponencia en Congreso. IABEM 2002 () (.2002.AUSTIN, USA). AUSTIN, USA. 2002
Paris-Carballo, Federico;Blázquez-Gámez, Antonio M.;Mantic-Lescisin, Vladislav;Mccartney-,N.L.:
CARACTERIZACION DE GRIETAS DE DELAMINACION EN LAMINADOS 0-90 SIMETRICOS.. Ponencia en Congreso. MATERIALES COMPUESTOS 01 (1.2001.GIJON). GIJON. 2001
Marín-Vallejo, Juan Carlos;Cañas-Delgado, José;Paris-Carballo, Federico;Blázquez-Gámez, Antonio M.;Morton-,J.:
EFFECT OF GRIPPING SYSTEM ON THE OFF-AXIS SPECIMEN IN FIBROUS COMPOSITES. Ponencia en Congreso. PROGRESS IN STRUCTURAL MECHANICS (1.2000.SEVILLA, ESPAÑA). Santander (ESPAÑA). 2000
Paris-Carballo, Federico;Blázquez-Gámez, Antonio M.;Cañas-Delgado, José;Mantic-Lescisin, Vladislav:
A COMPARISON BETWEEN NON-CONFORMING NODE-TO-POINT AND WEAK APPROACHES IN CONTACT PROBLEMS BY BEM.. Comunicación en congreso. BOUNDARY ELEMENTS XX (1.1998.ORLANDO, ESTADOS UNIDOS). ORLANDO, ESTADOS UNIDOS. 1998
Paris-Carballo, Federico;Blázquez-Gámez, Antonio M.;Cañas-Delgado, José;Mantic-Lescisin, Vladislav:
BEM ANALYSIS OF THE CONTACT PROBLEM IN FIBRES DEBONDED OF A MATRIZ: EFFECTS OF CURING STRESSES.. Comunicación en congreso. BOUNDARY ELEMENTS XX (1.1998.ORLANDO, ESTADOS UNIDOS). ORLANDO, ESTADOS UNIDOS. 1998
Cañas-Delgado, José;Picón-Carrizosa, Rafael;Paris-Carballo, Federico;Marín-Vallejo, Juan Carlos;Blázquez-Gámez, Antonio M.:
Sobre los criterios de agotamiento de uniones en ángulo sometidas a solicitaciones estáticas. Comunicación en congreso. XII Jornadas Técnicas de Soldadura. Asociación Española de Soldadura y Tecnologías de Unión. Madrid, España. 1998
Blázquez-Gámez, Antonio M.;Paris-Carballo, Federico:
INFLUENCE OF THE LOCATION OF THE CONTACT POINT IN NODE-TO-POINT CONTACT APPROACHES USING NON CONFORMING BOUNDARY ELEMENT DISCRETIZATIONS.. Comunicación en congreso. CONTACT MECHANICS III. () (.1997.MADRID, ESPAÑA). . 1997
Blázquez-Gámez, Antonio M.;Paris-Carballo, Federico:
INFLUENCIA DE LA FRICCIÓN EN LA EVALUACIÓN DEL MÓDULO DE CIZALLADURA INTRALAMINAR EN EL ENSAYO IOSIPESCU.. Comunicación en congreso. II CONGRESO NACIONAL DE MATERIALES COMPUESTOS (2.1997.MADRID). . 1997
Blázquez-Gámez, Antonio M.;Paris-Carballo, Federico;Cañas-Delgado, José:
UN ALGORITMO VARIACIONAL BASADO EN EL MEC PARA RESOLVER PROBLEMAS DE CONTACTO CON DISCRETIZACIONES NO CONFORMES.. Comunicación en congreso. CONGRESO DE METODOS NUMERICOS EN INGENIERIA (.1996.ZARAGOZA). . 1996
Blázquez-Gámez, Antonio M.;Paris-Carballo, Federico;Cañas-Delgado, José:
ANÁLISIS DEL ENSAYO LOSIPESCU PARA LA DETERMINACIÓN DEL G12 CON EL MÉTODO DE LOS ELEMENTOS DE CONTORNO.. Comunicación en congreso. CONGRESO NACIONAL DE MATERIALES COMPUESTOS (1.1996.SEVILLA,ESPAÑA). SEVILLA,ESPAÑA. 1995
Cañas-Delgado, José;Marín-Vallejo, Juan Carlos;Paris-Carballo, Federico;Blázquez-Gámez, Antonio M.:
ESTUDIO EXPERIMENTAL MEDIANTE INTERFEROMETRÍA MOIRÉ DEL EFECTO DE LAS MORDAZAS EN EL ENSAYO OFF-AXIS.. Comunicación en congreso. CONGRESO NACIONAL DE MATERIALES COMPUESTOS (1.1996.SEVILLA,ESPAÑA). SEVILLA,ESPAÑA. 1995
Paris-Carballo, Federico;Blázquez-Gámez, Antonio M.;Cañas-Delgado, José:
CONTACT PROBLEMS TESTING COMPOSITE MATERIALS BY THE BOUNDARY ELEMENT METHOD.. Comunicación en congreso. CONTACT MECHANICS-II () (.1995.FERRARA). FERRARA. 1995
Paris-Carballo, Federico;Blázquez-Gámez, Antonio M.;Cañas-Delgado, José;Mantic-Lescisin, Vladislav:
ANALYSIS OF SINGULARITIES IN COMPOSITE MATERIALS BY BEM.. Comunicación en congreso. BEM-17 () (.1995.MADISON, WISCONSIN, EEUU). MADISON, WISCONSIN, EEUU. 1995
Blázquez-Gámez, Antonio M.;Paris-Carballo, Federico;Cañas-Delgado, José:
Análisis del ensayo Iosipescu para la determinación de G12 con el método de los elementos de contorno. Comunicación en congreso. CONGRESO NACIONAL DE MATERIALES COMPUESTOS (1.1996.SEVILLA,ESPAÑA). SEVILLA,ESPAÑA. 1995
Cañas-Delgado, José;Picón-Carrizosa, Rafael;Paris-Carballo, Federico;Marín-,J.;Blázquez-Gámez, Antonio M.:
SOBRE LOS CRITERIOS DE AGOTAMIENTO DE UNIONES EN ÁNGULO SOMETIDAS A SOLICITACIONES ESTÁTICAS.. Comunicación en congreso. WORKSHOP ON VITAMINA D (7.2000.HUELVA). HUELVA. 1995
Blázquez-Gámez, Antonio M.;Paris-Carballo, Federico;Cañas-Delgado, José:
FRICTIONAL CONTACT PROBLEMS WITH NON CONFORMING DISCRETIZATIONS USING BEM.. Comunicación en congreso. BEM XVI () (.1994.SOUTHAMPTON). SOUTHAMPTON. 1994
Paris-Carballo, Federico;Cañas-Delgado, José;Blázquez-Gámez, Antonio M.;Morton-,J.:
BOUNDARY ELEMENTS ANALYSIS OF THE OFF-AXIS SPECIMEN.. Comunicación en congreso. INTERNATIONAL CONFERENCE OF COMPOSITE MATERIALS/9 () (.1993.MADRID). . 1993
Blázquez-Gámez, Antonio M.;Paris-Carballo, Federico;Cañas-Delgado, José;Garrido-,J.A.:
AN ALGORITHM FOR FRICTIONLESS CONTACT PROBLEMS WITH NON-CONFORMING DISCRETIZATIONS USING BEM.. Comunicación en congreso. BOUNDARY ELEMENT XIV (.1992.ENGLAND). ENGLAND. 1992

Artículos publicados

Cañas-Delgado, José;Blázquez-Gámez, Antonio M.;Estefani-Morales, Alejandro;Távara-Mendoza, Luis:
Accurate determination of the stiffness properties for an elastic interface under peeling conditions between homogeneous materials. Composite Structures. 2022. Vol: 285. Pág. 1-13. https://doi.org/10.1016/j.compstruct.2021.115106.
Pastorino, Daniel;Blázquez-Gámez, Antonio M.;López-romano, Bernardo;Paris-Carballo, Federico:
Closed-form methodology for the bending of symmetric composite plates with cutouts and non-uniform lay-up. Composite Structures. 2021. Vol: 271. Pág. 1-11. https://doi.org/10.1016/j.compstruct.2021.114052.
Cepero-mejías, Fernando;Curiel-sosa, José Luis;Blázquez-Gámez, Antonio M.;Yu, Tiantang;Kerrigan, Kevin;Phadnis, Vaibhav A.:
Review of recent developments and induced damage assessment in the modelling of the machining of long fibre reinforced polymer composites. Composite Structures. 2020. Vol: 240. https://doi.org/10.1016/j.compstruct.2020.112006.
Reinoso-Cuevas, José Antonio;Paggi, Marco; Areias, Pedro;Blázquez-Gámez, Antonio M.:
Surface-based and solid shell formulations of the 7-parameter shell model for layered CFRP and functionally graded power-based composite structures. Mechanics of Advanced Materials and Structures. 2019. Vol: 26. Núm: 15. Pág. 1271-1289. 10.1080/15376494.2018.1432802.
Távara-Mendoza, Luis;Reinoso-Cuevas, José Antonio;Blázquez-Gámez, Antonio M.;Mantic-Lescisin, Vladislav:
On the 3D extension of failure models for adhesive joints under mixed-mode fracture conditions: LEBIM and CZM. Theoretical and Applied Fracture Mechanics. 2019. Vol: 100. Pág. 362-376. https://doi.org/10.1016/j.tafmec.2019.01.004.
Pastorino-junquero, Daniel;Blázquez-Gámez, Antonio M.;López-romano, Bernardo;Paris-Carballo, Federico:
Closed-form methodology for stress analysis of composite plates with cutouts and non-uniform lay-up . Composite Structures. 2019. Vol: 212. Pág. 389-397. https://doi.org/10.1016/j.compstruct.2019.01.013.
Távara-Mendoza, Luis;Reinoso-Cuevas, José Antonio;Blázquez-Gámez, Antonio M.;Mantic-Lescisin, Vladislav:
ASPECTOS ASOCIADOS A LA EXTENSIÓN 3D DE MODELOS DE INTERFASE: CZM Y LEBIM. Anales de Mecánica de la Fractura. 2018. Vol: 35. Pág. 415-420.
Cañas-Delgado, José;Távara-Mendoza, Luis;Blázquez-Gámez, Antonio M.;Estefani-Morales, Alejandro:
Overview of Gc Tests Used to Evaluate Composite-Composite Adhesive Joints. Journal of Multiscale Modeling. 2018. Vol: 9. Núm: 3. 10.1142/S1756973718420027.
Cañas-Delgado, José;Távara-Mendoza, Luis;Blázquez-Gámez, Antonio M.;Estefani-Morales, Alejandro;Santacruz, Gloria:
A new in situ peeling test for the characterisation of composite bonded joints. Composites. Part A, Applied Science and Manufacturing. 2018. Vol: 113. Pág. 298-310. https://doi.org/10.1016/j.compositesa.2018.07.014.
García-García, Israel;Mantic-Lescisin, Vladislav;Blázquez-Gámez, Antonio M.:
The effect of residual thermal stresses on transverse cracking in cross-ply laminates: an application of the coupled criterion of the finite fracture . International Journal of Fracture. 2018. 10.1007/s10704-018-0276-9.
Justo-Estebaranz, Jesús;Reinoso-Cuevas, José Antonio;Blázquez-Gámez, Antonio M.:
Experimental failure investigation of pull-off tests of single T-stiffened composite specimens. Composite Structures. 2017. https://doi.org/10.1016/j.compstruct.2017.04.070.
Reinoso-Cuevas, José Antonio;Paggi, M;Blázquez-Gámez, Antonio M.:
A nonlinear finite thickness cohesive interface element for modeling delamination in fibre-reinforced composite laminates. Composites Part B: Engineering. 2017. Vol: 109. Pág. 116-128. http://dx.doi.org/10.1016/j.compositesb.2016.10.042.
Reinoso-Cuevas, José Antonio;Catalanotti, G;Blázquez-Gámez, Antonio M.;Areias, P;Camanho, P.p.;Paris-Carballo, Federico:
A consistent anisotropic damage model for laminated fiber-reinforced composites using the 3D-version of the Puck failure criterion. International Journal of Solids and Structures. 2017. Vol: 126-127. Pág. 37-53. 10.1016/j.ijsolstr.2017.07.023 .
Estefani-Morales, Alejandro;Távara-Mendoza, Luis;Blázquez-Gámez, Antonio M.;Cañas-Delgado, José;Paris-Carballo, Federico:
Ensayos numéricos de uniones adhesivas composite-composite para la determinación de la tenacidad a la fractura. Materiales Compuestos. 2017. Vol: 2. Núm: 4. Pág. 94-99.
Justo-Estebaranz, Jesús;Reinoso-Cuevas, José Antonio;Blázquez-Gámez, Antonio M.;Gómez, B.:
Ensayos de pull-off sobre probetas con rigidizadores en T. Materiales Compuestos. 2017. Vol: 1. Pág. 135-141.
Távara-Mendoza, Luis;Reinoso-Cuevas, José Antonio;Estefani-Morales, Alejandro;Blázquez-Gámez, Antonio M.;Mantic-Lescisin, Vladislav;Paris-Carballo, Federico:
MODELO DE INTERFASE ELASTICA LINEAL FRAGIL (MIELF) APLICADO A PROBLEMAS TRIDIMENSIONALES CON CRECIMIENTO DE GRIETAS EN MODO MIXTO. Anales de Mecánica de la Fractura. 2016. Vol: 33. Pág. 1-6.
Reinoso-Cuevas, José Antonio;Blázquez-Gámez, Antonio M.:
Geometrically nonlinear analysis of functionally graded power-based and carbon nanotubes reinforced composites using a fully integrated solid shell el. Composite Structures. 2016. Vol: 152. Pág. 277-294. http://dx.doi.org/10.1016/j.compstruct.2016.05.036.
Reinoso-Cuevas, José Antonio;Blázquez-Gámez, Antonio M.;Távara-Mendoza, Luis;Paris-Carballo, Federico;Arellano, Carlos:
Damage tolerance of composite runout panels under tensile loading. Composites Part B: Engineering. 2016. Vol: 96. Pág. 79-93. http://dx.doi.org/10.1016/j.compositesb.2016.03.083.
Reinoso-Cuevas, José Antonio;Blázquez-Gámez, Antonio M.:
Application and finite element implementation of 7-parameter shell element for geometrically nonlinear analysis of layered CFRP composites. Composite Structures. 2016. Vol: 139. Pág. 263-276. http://dx.doi.org/10.1016/j.compstruct.2015.12.009.
Gonzalez-cantero, Juan Manuel;Graciani-Díaz, Enrique;Blázquez-Gámez, Antonio M.;Paris-Carballo, Federico:
A new analytical model for evaluating interlaminar stresses in the unfolding failure of composite laminates. Composite Structures. 2016. Vol: 147. Pág. 260-273. 10.1016/j.compstruct.2016.03.025.
Mantic-Lescisin, Vladislav;Távara-Mendoza, Luis;Blázquez-Gámez, Antonio M.;Graciani-Díaz, Enrique;Paris-Carballo, Federico:
A linear elastic - brittle interface model: Application to the onset and propagation of a fibre-matrix interface crack under biaxial transverse loads. International Journal of Fracture. 2015. Vol: 195. Pág. 15-38. 10.1007/S10704-015-0043-0.
García-García, Israel;Mantic-Lescisin, Vladislav;Blázquez-Gámez, Antonio M.;Paris-Carballo, Federico:
Transverse crack onset and growth in cross-ply [0/90]s laminates under tension. Application of a coupled stress and energy criterion. International Journal of Solids and Structures. 2014. Vol: 51. Núm: 23. Pág. 3844-3856. doi:10.1016/j.ijsolstr.2014.06.015.
Reinoso-Cuevas, José Antonio;Blázquez-Gámez, Antonio M.;Estefani-Morales, Alejandro;Paris-Carballo, Federico;Cañas-Delgado, José:
A composite runout specimen subjected to tension-compression loading conditions: Experimental and global¿local finite element analysis. Composite Structures. 2013. Vol: 101. Pág. 274-289. http://dx.doi.org/10.1016/j.compstruct.2012.12.056.
Blázquez-Gámez, Antonio M.;Estefani-Morales, Alejandro;Paris-Carballo, Federico;Cañas-Delgado, José;Arévalo, E.;Cruz, F.:
Experimental and three-dimensional global-local finite element analysis of a composite component including degradation process at the interfaces. Composites Part B: Engineering. 2012. Vol: 43. Núm: 4. Pág. 1929-1942. 10.1016/j.compositesb.2012.02.010.
Blázquez-Gámez, Antonio M.;Paris-Carballo, Federico;Cañas-Delgado, José;Meléndez, J.c.:
Postbuckling behaviour of a pressurized stiffened composite panel ¿ Part I: Experimental study.. Composite Structures. 2012. Vol: 94. Núm: 5. Pág. 1533-1543. 10.1016/j.compstruct.2011.12.014.
Távara-Mendoza, Luis;Mantic-Lescisin, Vladislav;Blázquez-Gámez, Antonio M.;Graciani-Díaz, Enrique;Paris-Carballo, Federico:
Estudio de grietas transversales y de delaminación en laminados simétricos [0/90] de material compuesto usando la formulación de interfase elástica li. Anales de Mecánica de la Fractura. 2012. Vol: 29. Núm: 2. Pág. 491-496.
Mccartney, L. Neil;Blázquez-Gámez, Antonio M.;Paris-Carballo, Federico:
Energy-based delamination theory for biaxial loading in the presence of thermal stresses. Composites Science and Technology. 2012. Vol: 72. Núm: 14. Pág. 1753-1766. 10.1016/j.compscitech.2012.06.015.
Blázquez-Gámez, Antonio M.;Paris-Carballo, Federico;Cañas-Delgado, José:
Postbuckling behaviour of a pressurized stiffened composite panel ¿ Part II: Numerical analysis. Effect of the geometrical imperfections . Composite Structures. 2012. Vol: 94. Núm: 5. Pág. 1544-1554. 10.1016/j.compstruct.2011.12.013.
Graciani-Díaz, Enrique;Varna, Janis;Mantic-Lescisin, Vladislav;Blázquez-Gámez, Antonio M.;Paris-Carballo, Federico:
Evaluation of interfacial fracture toughness and friction coefficient in the single fiber fragmentation test. Procedia Engineering. 2011. Vol: 10. Pág. 2478-2483. http://dx.doi.org/10.1016/j.proeng.2011.04.408.
Távara-Mendoza, Luis;Mantic-Lescisin, Vladislav;Graciani-Díaz, Enrique;Blázquez-Gámez, Antonio M.;Paris-Carballo, Federico:
CARACTERIZACIÓN DEL INICIO Y CRECIMIENTO DE GRIETAS DE INTERFAZ ENTRE FIBRA Y MATRIZ BAJO CARGAS TRANSVERSALES BIAXIALES USANDO EL MODELO DE INTERFAZ . Anales de Mecánica de la Fractura. 2011. Vol: 28. Pág. 565-570.
Blázquez-Gámez, Antonio M.;Paris-Carballo, Federico:
EFFECT OF NUMERICAL ARTIFICIAL CORNERS APPEARING WHEN USING BEM ON CONTACT STRESSES. Engineering Analysis With Boundary Elements. 2011. Vol: 35. Núm: 9. Pág. 1029-1037.
Blázquez-Gámez, Antonio M.;Picón-Carrizosa, Rafael:
ANALYTICAL AND NUMERICAL MODELS OF POSTBUCKLING OF ORTHOTROPIC SYMMETRIC PLATES. Journal of engineering mechanics. 2010. Vol: 136. Núm: 10. Pág. 1299-1308.
Paris-Carballo, Federico;Blázquez-Gámez, Antonio M.;Mccartney-,N.L.;Barroso-Caro, Alberto:
CHARACTERIZATION AND EVOLUTION OF MATRIX AND INTERFACE RELATED DAMAGE IN [0/90]S LAMINATES UNDER TENSION. PART II: EXPERIMENTAL EVIDENCE. Composites Science and Technology. 2010. Vol: 70. Pág. 1176-1183. 10.1016/j.compscitech.2010.03.006 .
Paris-Carballo, Federico;Blázquez-Gámez, Antonio M.;Mccartney-,N.L.;Mantic-Lescisin, Vladislav:
CHARACTERIZATION AND EVOLUTION OF MATRIX AND INTERFACE RELATED DAMAGE IN [0/90]S LAMINATES UNDER TENSION. PART I: NUMERICAL PREDICTIONS. Composites Science and Technology. 2010. Vol: 70. Pág. 1168-1175.
Blázquez-Gámez, Antonio M.;Mantic-Lescisin, Vladislav;Paris-Carballo, Federico;Mccartney-,N.L.:
BEM ANALYSIS OF DAMAGE PROGRESS IN 0/90 LAMINATES. Engineering Analysis With Boundary Elements. 2009. Vol: 33. Núm: 6. Pág. 762-769.
Correa-Montoto, Elena;Blázquez-Gámez, Antonio M.;Estefani-Morales, Alejandro;Paris-Carballo, Federico;Cañas-Delgado, José:
EFFECTS OF THE STRESS STATE GENERATED DURING THE MANUFACTURING PROCESS OF COPPER ANODES ON THE MOULDS: WARPING AND CRACKING. Engineering Failure Analysis. 2009. Vol: 16. Núm: 1. Pág. 309-320.
Blázquez-Gámez, Antonio M.;Correa-Montoto, Elena;Estefani-Morales, Alejandro;Paris-Carballo, Federico;Cañas-Delgado, José:
FABRICATION STRESSES INDUCING CRACKING OF A MOULD MADE OF COPPER. Engineering Failure Analysis. 2009. Vol: 16. Núm: 1. Pág. 358-370.
Blázquez-Gámez, Antonio M.;Paris-Carballo, Federico:
ON THE NECESSITY OF NON-CONFORMING ALGORITHMS FOR 'SMALL DISPLACEMENT' CONTACT PROBLEMS AND CONFORMING DISCRETIZATIONS BY BEM. Engineering Analysis With Boundary Elements. 2009. Vol: 33. Núm: 2. Pág. 184-190.
Blázquez-Gámez, Antonio M.;Mantic-Lescisin, Vladislav;Paris-Carballo, Federico;Mccartney-,N.L.:
STRESS STATE CHARACTERIZATION OF DELAMINATION CRACKS IN [0/90] SYMMETRIC LAMINATES BY BEM. International Journal of Solids and Structures. 2008. Vol: 45. Núm: 6. Pág. 1632-1662.
Kalthoff-,J.F.;Fdez.-Canteli,A.;Blázquez-Gámez, Antonio M.;Fernández-Zúñiga,Daniel:
SINGULAR STRESS FIELDS AND INSTABILITY CONDITIONS FOR MODE-II AND MIXED-MODE LOADED CRACKS. Strength, Fracture and Complexity. 2006. Vol: 4. Pág. 141-160.
Blázquez-Gámez, Antonio M.;Mantic-Lescisin, Vladislav;Paris-Carballo, Federico:
APPLICATION OF BEM TO GENERALIZED PLANE PROBLEMS FOR ANISOTROPIC ELASTIC MATERIALS IN PRESENCE OF CONTACT. Engineering Analysis With Boundary Elements. 2006. Vol: 30. Núm: 6. Pág. 489-502.
Graciani-Díaz, Enrique;Mantic-Lescisin, Vladislav;Paris-Carballo, Federico;Blázquez-Gámez, Antonio M.:
WEAK FORMULATION OF AXI-SYMMETRIC FRICTIONLESS CONTACT PROBLEMS WITH BOUNDARY ELEMENTS: APPLICATION TO INTERFACE CRACKS. Computers & Structures. 2005. Vol: 83. Núm: 10-11. Pág. 836-855.
Fernández-Zúñiga,Daniel;Blázquez-Gámez, Antonio M.;Kalthoff-,J.F.;Fdez.-Canteli,A.:
CAMPOS DE TENSIÓN SINGULARES Y CONDICIONES DE INESTABILIDAD EN MODO-II. Anales de Mecánica de la Fractura. 2005. Vol: 22. Pág. 482-489.
Paris-Carballo, Federico;Blázquez-Gámez, Antonio M.;Mantic-Lescisin, Vladislav:
CARACTERIZACIÓN DEL DAÑO DE ACUERDO A LA MECÁNICA DE LA FRACTURA EN LAMINADOS 0/90. Anales de Mecánica de la Fractura. 2004. Vol: 21. Pág. 368-373.
Blázquez-Gámez, Antonio M.;Vodicka-,R.;Paris-Carballo, Federico;Mantic-Lescisin, Vladislav:
COMPARING THE CONVENTIONAL DISPLACEMENT BIE AND THE BIE FORMULATIONS OF THE FIRST AND SECOND KIND IN FRICTIONLESS CONTACT PROBLEMS. Engineering Analysis With Boundary Elements. 2002. Vol: 26. Núm: 10. Pág. 815-826.
Cañas-Delgado, José;Picón-Carrizosa, Rafael;Paris-Carballo, Federico;Marín-,J.;Blázquez-Gámez, Antonio M.:
SOBRE LOS CRITERIOS DE AGOTAMIENTO DE UNIONES EN ÁNGULO SOMETIDAS A SOLICITACIONES ESTÁTICAS.. Soldadura y Tecnologías de Unión. 2000. Vol: 11. Núm: 62. Pág. 13-20.
Blázquez-Gámez, Antonio M.;Paris-Carballo, Federico;Cañas-Delgado, José:
INTERPRETATION OF THE PROBLEMS FOUND IN APPLYING CONTACT CONDITIONS IN NODE-TO-POINT SCHEMES WITH BOUNDARY ELEMENT NON- CONFORMING DISCRETIZATIONS. Engineering Analysis With Boundary Elements. 1998. Vol: 21. Núm: 4. Pág. 361-375.
Blázquez-Gámez, Antonio M.;Paris-Carballo, Federico;Mantic-Lescisin, Vladislav:
BEM SOLUTION OF TWO-DIMENSIONAL CONTACT PROBLEMS BY WEAK APPLICATION OF CONTACT CONDITIONS WITH NON-CONFORMING DISCRETIZATIONS. International Journal of Solids and Structures. 1998. Vol: 35. Pág. 3259-3278.
Cañas-Delgado, José;Picón-Carrizosa, Rafael;Paris-Carballo, Federico;Blázquez-Gámez, Antonio M.;Marín-Vallejo, Juan Carlos:
A SIMPLIFIED NUMERICAL ANALYSIS OF RESIDUAL STRESS IN ALUMINUN WELDED PLATES. Computers & Structures. 1996. Vol: 58. Núm: 1. Pág. 59-69.
Blázquez-Gámez, Antonio M.;Mantic-Lescisin, Vladislav;Paris-Carballo, Federico;Cañas-Delgado, José:
ON THE REMOVAL OF RIGID BODY MOTIONS IN THE SOLUTION OF ELASTOSTATIC PROBLEMS BY DIRECT BEM. International Journal for Numerical Methods in Engineering. 1996. Vol: 39. Núm: 23. Pág. 4021-4038.
Paris-Carballo, Federico;Blázquez-Gámez, Antonio M.;Cañas-Delgado, José:
CONTACT PROBLEMS WITH NONCONFORMING DISCRETIZATIONS USING BOUNDARY-ELEMENT METHOD. Computers & Structures. 1995. Vol: 57. Núm: 5. Pág. 829-839.
Paris-Carballo, Federico;Blázquez-Gámez, Antonio M.:
ON THE DISPLACEMENT AND LOAD SCALING TECHNIQUES IN CONTACT PROBLEMS USING BEM.. Boundary Element Communications. 1994. Vol: 5. Núm: 1. Pág. 15-17.
Blázquez-Gámez, Antonio M.;Paris-Carballo, Federico;Cañas-Delgado, José:
APLICACIÓN DEL MÉTODO DE LOS ELEMENTOS DE CONTORNO AL PROBLEMA DE CONTACTO SIN FRICCIÓN UTILIZANDO DISCRETIZACIÓN NO CONFORMES.. Anales de Ingeniería Mecánica. 1992. Núm: 1. Pág. 205-208.

Patentes

Blázquez-Gámez, Antonio M.: Análisis de las tuberías Feeders, Risers y Downcomers de la central térmica ¿los Barrios¿. Número de patente:
Blázquez-Gámez, Antonio M.: Análisis numérico sobre las posibles causas tensionales del agrietamiento de un molde para la fabricación de ánodos¿. Número de patente:
Paris-Carballo, Federico;Cañas-Delgado, José;Távara-Mendoza, Luis;Blázquez-Gámez, Antonio M.;Estefani-Morales, Alejandro;Santacruz, Gloria;Stoven, Timo: Equipo de ensayo para la determinación in situ de la tenacidad a la fractura de uniones encoladas. Número de patente: