ANDRES JESUS MARTINEZ DONAIRE

Categoría
Profesor Titular de Universidad

Contacto

Correo electrónico
Área
Ingeniería de los Procesos de Fabricación

Investigación

Grupo de investigación

INGENIERIA MECANICA (INGENIERIA MECANICA)

Proyectos y contratos de investigación

ANÁLISIS DEL EFECTO COMBINADO TRACCIÓN-FLEXIÓN EN PROCESOS DE CONFORMADO DE CHAPA METÁLICA.DPI2009-13335 (DPI2009-13335 - Investigador/a)
Jigless Techniques & Flexible Tooling for Assembly Applications (NEBULA+) (PI-1842/20/2018 - Responsable)
Simulación y análisis del proceso de conformado de tubos por flexión (AE-0730/2009 - Investigador/a)
Nébula - Nueva generación de sistemas de ensamblaje flexibles ultraligeros (Feder Innterconecta - MC2) (PI-1602/20/2016 - Responsable)
Digital Manufacturing and Virtual factory in the Aeronautical Industry using 3DExperience (PI-1753/20/2017 - Investigador/a)
Nébula - Nueva generación de sistemas de ensamblaje flexibles ultraligeros (Feder Innterconecta - AIRBUS DS) (PI-1601/20/2016 - Responsable)
Value Chain: From IDMU to LEAN documentation for assembly (ARIADNE) (PI-1498/20/2016 - Investigador/a)
MINERVA - Manufacturing Industrial - Means Emerging from Validated Automation (PI-1375/2015 - Investigador/a)
Modelado 3D y verificación dimensional de prototipo de caja fuerte desmontable (PI-1223/2013 - Investigador/a)
Desarrollo de un nuevo método de realización de puntos de conexión a masa y retorno de corriente (AMASA) (PI-1212/20/2013 - Investigador/a)
Desarrollo e Investigación de Nuevas Tecnologías para la Automatización de los Procesos de Montaje Aeronáutico (PI-1035/2012 - Investigador/a)
Desarrollo e Investigación de Nuevas Tecnologías para la Automatización de los Procesos de Montaje Aeronáutico (PI-1033/2012 - Investigador/a)
Experimental Survey for Analyzing the Influence of Assembly Process Parameters on the Fatigue Life of Blind Bolts Riveted Metal-Composite Joints(MTQM- (PI-0871/2011 - Investigador/a)
Proceso de Conformado Incremental para el Rebordeado de Chapas de Aluminio de Ductilidad Reducida y Láminas Poliméricas: Mejora de la Conformabilidad (DPI2015-64047-R - Investigador/a)
Análisis del Proceso de Conformado Incremental Mono-Punto de Chapa y su Aplicación al Rebordeado de Agujeros (Hole Flanging) (DPI2012-32913 - Investigador/a)
Análisis del Proceso de Conformado Incremental Mono-Punto de Chapa y su Aplicación al Rebordeado de Agujeros (Hole Flanging) (DPI2012-32913 - Investigador/a)
Análisis del Proceso de Conformado Incremental Mono-Punto de Chapa y su Aplicación al Rebordeado de Agujeros (Hole Flanging) (DPI2012-32913 - Investigador/a)
ANÁLISIS DEL EFECTO COMBINADO TRACCIÓN-FLEXIÓN EN PROCESOS DE CONFORMADO DE CHAPA METÁLICA.DPI2009-13335 (DPI2009-13335 - Investigador/a)

Capítulos en Libros

G. Centeno;Martínez-Donaire, Andrés Jesús;Morales-Palma, Domingo;Vallellano-Martin, Carpoforo;Silva, M. Beatriz;Martins, Paulo A. F.:
Novel experimental techniques for the determination of the forming limits at necking and fracture. Pág. 1-24. Woodhead/Elsevier. Woodhead/Elsevier. 2015.
Vallellano-Martin, Carpoforo;Morales-Palma, Domingo;Martínez-Donaire, Andrés Jesús;Garcia-Lomas-Jung, Francisco Javier;Vázquez-Valeo, Jesús:
Numerical analysis of the deformation mechanisms in incremental forming of AA2024-T3 sheets. Pág. 740-747. 2011.

Asistencia a congresos

Borrego, Marcos;Palomo-vázquez, David;Martínez-Donaire, Andrés Jesús;López-fernández, José Andrés;Vallellano-Martin, Carpoforo:
Ductile fracture analysis in Nakazima vs. SPIF tests. Poster en Congreso. 10th Manufacturing Engineering Society International Conference. ESCUELA TECNICA SUPERIOR DE INGENIERIA DE SEVILLA. 2023
Palomo-vázquez, David;Martínez-Donaire, Andrés Jesús;López-fernández, José Andrés;Borrego, Marcos;Vallellano-Martin, Carpoforo:
Preliminary Study on the Onset of Necking Detection Using DIT in Tensile Tests. Ponencia en Congreso. 25th International Conference on Material Forming. Portugal. 2022
Rosa-sainz, Ana;Silva, Beatriz;Lopez Fernandez, Andres;Martínez-Donaire, Andrés Jesús;Vallellano-Martin, Carpoforo:
On the Determination of the Forming Limits by Necking and Fracture of Polycarbonate Sheet. Ponencia en Congreso. Proceedings of the 13th International Conference on the Technology of Plasticity. Columbia, COLUMBUS, OHIO (EEUU). 2021
Flores, G.;Palomo, David;Martínez-Donaire, Andrés Jesús;Borrego, Marcos;López-fernández, José Andrés;Morales-Palma, Domingo;G. Centeno;Vallellano-Martin, Carpoforo:
Design for FDM of flexible tooling for manufacturing aeronautical components by incremental sheet forming. Ponencia en Congreso. 9th Manufacturing Engineering Society International Conference. Gijón, Spain. 2021
Morales-Palma, Domingo;Borrego, Marcos;López-fernández, José Andrés;Martínez-Donaire, Andrés Jesús;G. Centeno;Vallellano-Martin, Carpoforo:
Numerical analysis of necking in stretch-bending based on modified maximum force criteria. Poster en Congreso. 9th Manufacturing Engineering Society International Conference. Gijón, Spain. 2021
Rosa-sainz, Ana;Magrinho, Joao;Silva, Beatriz;G. Centeno;Martínez-Donaire, Andrés Jesús;Vallellano-Martin, Carpoforo:
Experimental research of formability limits in different thicknesses of polycarbonate sheets. Ponencia en Congreso. International Deep-Drawing Research Group Conference . STUGGART, ALEMANIA. 2021
Borrego, Marcos;Morales-Palma, Domingo;López-fernández, José Andrés;Martínez-Donaire, Andrés Jesús;G. Centeno;Vallellano-Martin, Carpoforo:
Revisiting flangeability in hole-flanging by single-stage incremental forming and conventional process. Ponencia en Congreso. 24th International Conference on Material Forming. Liège, Belgium. 2021
Borrego, Marcos;Morales-Palma, Domingo;López-fernández, José Andrés;Martínez-Donaire, Andrés Jesús;G. Centeno;Vallellano-Martin, Carpoforo:
Hole-flanging of AA7075-O sheets: conventional process versus SPIF. Ponencia en Congreso. The 18th International Conference on Metal Forming 2020. Krakow, Poland. 2020
López-fernández, José A.;G. Centeno;Borrego, Marcos;Martínez-Donaire, Andrés Jesús;Morales-Palma, Domingo;Vallellano-Martin, Carpoforo:
Numerical study of formability and failure prediction in shrink and stretch flanging by SPIF. Ponencia en Congreso. The 13th International Conference on Numerical Methods in Industrial Forming Processes. Portsmouth, New Hampshire, USA. 2019
Martínez-Donaire, Andrés Jesús;Morales-Palma, Domingo;Borrego, Marcos;López_fernández, José A.;G. Centeno;Vallellano-Martin, Carpoforo:
Analysis of stress triaxiality on the formability of hole-flanged parts by SPIF. Ponencia en Congreso. The 13th International Conference on Numerical Methods in Industrial Forming Processes. Portsmouth, New Hampshire, USA. 2019
Martínez-Donaire, Andrés Jesús;Martínez-palmeth, Luis H;Borrego, Marcos;Morales-Palma, Domingo;Vallellano-Martin, Carpoforo:
Analysis of the failure of H240LA steel sheets subjected to stretch-bending conditions. Comunicación en congreso. 8th Manufacturing Engineering Society International Conference. Madrid. 2019
Martínez-Donaire, Andrés Jesús;Morales-Palma, Domingo;Borrego, Marcos;G. Centeno;Vallellano-Martin, Carpoforo:
On the effect of stress state on the failure limits of hole- flanged parts formed by SPIF. Ponencia en Congreso. The 11th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes. Tokyo, Japan. 2018
Martínez-Donaire, Andrés Jesús;Borrego, Marcos;Morales-Palma, Domingo;G. Centeno;Vallellano-Martin, Carpoforo:
Hole Expansion of A High Strength Steel Sheet. Comunicación en congreso. The 11th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes. Tokyo, Japan. 2018
Morales-Palma, Domingo;Borrego, Marcos;Martínez-Donaire, Andrés Jesús;G. Centeno;Vallellano-Martin, Carpoforo:
Numerical study on the thickness homogenization in hole-flanging by single-point incremental forming. Ponencia en Congreso. The 11th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes. Tokyo, Japan. 2018
G. Centeno;Martínez-Donaire, Andrés Jesús;Morales-Palma, Domingo;Vallellano-Martin, Carpoforo:
Experimental and numerical analysis of the flanging process by SPIF. Ponencia en Congreso. The 11th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes. Tokyo, Japan. 2018
Morales-Palma, Domingo;Borrego, Marcos;Martínez-Donaire, Andrés Jesús;G. Centeno;Vallellano-Martin, Carpoforo:
Preliminary investigation on homogenization of the thickness distribution in hole-flanging by SPIF. Ponencia en Congreso. 7th Manufacturing Engineering Society International Conference. Vigo (España). 2017
Martínez-Donaire, Andrés Jesús;Morales-Palma, Domingo;Borrego, Marcos;G. Centeno;Vallellano-Martin, Carpoforo:
Numerical Explicit Analysis of Hole Flanging by Single-Stage Incremental Forming. Ponencia en Congreso. 7th Manufacturing Engineering Society International Conference. Vigo (España). 2017
G. Centeno;Bagudanch, Isabel;Morales-Palma, Domingo;García-romeu, María Luisa;González-pérez-somarriba, Borja;Martínez-Donaire, Andrés Jesús;Gonzalez-Perez, Luis Miguel;Vallellano-Martin, Carpoforo:
Recent approaches for the manufacturing of polymeric cranial prostheses by incremental sheet forming. Ponencia en Congreso. 17th International Conference on Sheet Metal. Palermo (Italia). 2017
Morales-Palma, Domingo;Martínez-Donaire, Andrés Jesús;G. Centeno;Borrego, Marcos;Vallellano-Martin, Carpoforo:
Experiencia docente de simulación de procesos de fabricación en máquinas de control numérico. Comunicación en congreso. 24 Congreso de Innovación Educativa en las Enseñanzas Técnicas (2016). Cádiz, España. 2016
Martínez-Donaire, Andrés Jesús;Morales-Palma, Domingo;G. Centeno;Borrego, Marcos;Vallellano-Martin, Carpoforo:
Enseñanza-Aprendizaje de Procesos de Conformado de Chapa Mediante DEFORM-3D. Ponencia en Congreso. 24 Congreso de Innovación Educativa en las Enseñanzas Técnicas (2016). Cádiz, España. 2016
Morales-Palma, Domingo;Martínez-Donaire, Andrés Jesús;G. Centeno;Vallellano-Martin, Carpoforo:
Teaching experience for the virtualization of machine tools and simulation of manufacturing operations. Comunicación en congreso. 22nd Symposium on New Frontiers in Materials Processing and Manufacturing Engineering Training and Learning. ALMADÉN (CIUDAD REAL). 2016
G. Centeno;Martínez-Donaire, Andrés Jesús;Morales-Palma, Domingo;Borrego, Marcos;Vallellano-Martin, Carpoforo:
Multidisciplinary learning of manufacturing engineering through bachelor and master theses in incremental sheet forming. Comunicación en congreso. 22nd Symposium on New Frontiers in Materials Processing and Manufacturing Engineering Training and Learning. ALMADÉN (CIUDAD REAL). 2016
G. Centeno;Morales-Palma, Domingo;Martínez-Donaire, Andrés Jesús;Borrego, Marcos;Vallellano-Martin, Carpoforo:
A numerical study of the stress/strain evolution in single-point incremental forming of AA2024-T3 sheets. Comunicación en congreso. Advances in Materials & Processing Technologies. Leganés (Madrid), España. 2015
Borrego, Marcos;Morales-Palma, Domingo;Martínez-Donaire, Andrés Jesús;G. Centeno;Vallellano-Martin, Carpoforo:
On the study of the single-stage hole flanging process by SPIF. Ponencia en Congreso. 6th Manufacturing Engineering Society International Conference. Barcelona (Spain). 2015
Silva, María Beatriz;Martínez-Donaire, Andrés Jesús;G. Centeno;Vallellano-Martin, Carpoforo:
Recent Approaches for the Determination of Forming Limits by Necking and Fracture in Sheet Metal Forming. Comunicación en congreso. 6th Manufacturing Engineering Society International Conference. Barcelona (España). 2015
Silva, Maria Beatriz;Martínez-Donaire, Andrés Jesús;G. Centeno;Morales-Palma, Domingo;Vallellano-Martin, Carpoforo;Firmé-martins, Paulo Antonio:
Forming limits by necking and fracture in sheet metal forming. Comunicación en congreso. 6th Manufacturing Engineering Society International Conference. Barcelona (España). 2015
Morales-Palma, Domingo;Martínez-Donaire, Andrés Jesús;G. Centeno;Vallellano-Martin, Carpoforo:
Experiencia docente de fabricación en máquinas de control numérico. Ponencia en Congreso. 22 Congreso de Innovación Educativa en las Enseñanzas Técnicas. ALMADÉN (CIUDAD REAL). 2014
G. Centeno;Martínez-Donaire, Andrés Jesús;Morales-Palma, Domingo;Borrego, Marcos;Vallellano-Martin, Carpoforo:
Aprendizaje Multidisciplinar de Tecnologías de Fabricación en Trabajos de Fin de Estudios en el Ámbito de los Procesos de Conformado Incremental. Ponencia en Congreso. 22 Congreso de Innovación Educativa en las Enseñanzas Técnicas. ALMADÉN (CIUDAD REAL). 2014
Martínez-palmeth, Luis Humberto;Martínez-Donaire, Andrés Jesús;Vallellano-Martin, Carpoforo;G. Centeno;Garcia-Lomas-Jung, Francisco Javier:
Formability of Automotive H240LA Steel Sheets in Stretch Bending. Ponencia en Congreso. Manufacturing Engineering Society International Conference, 5th MESIC 2013. Zaragoza (Spain). 2013
G. Centeno;Martínez-Donaire, Andrés Jesús;Vallellano-Martin, Carpoforo;Martínez-palmeth, Luis Humberto;Morales-Palma, Domingo;Suntaxi, Carlos;Garcia-Lomas-Jung, Francisco Javier:
Experimental Study on the Evaluation of Necking and Fracture Strains in Sheet Metal Forming Processes. Ponencia en Congreso. 5th Manufacturing Engineering Society International Conference. Zaragoza, España. 2013
G. Centeno;Bagudanch, Isabel;García-romeu, M. Luisa;Vallellano-Martin, Carpoforo;Martínez-Donaire, Andrés Jesús:
Experimental Study on the Overall Spifability of AISI 304 Sheets under Different Bending Conditions. Ponencia en Congreso. The 16th International Esaform Conference On Material Forming. AVEIRO (PORTUGAL). 2013
Martínez-palmeth, Luis Humberto;Martínez-Donaire, Andrés Jesús;Vallellano-Martin, Carpoforo;G. Centeno;Garcia-Lomas-Jung, Francisco Javier:
Experimental Study of the Formability of H240LA Steel Sheets Under Stretch-bending Conditions. Ponencia en Congreso. International Conference on Sheet Metal, SheMet 13. BELFAST, NORTHERN IRELAND. 2013
Morales-Palma, Domingo;Vallellano-Martin, Carpoforo;Martínez-Donaire, Andrés Jesús;G. Centeno;Garcia-Lomas-Jung, Francisco Javier:
INFLUENCE OF PUNCH RADIUS ON THE FORMABILITY OF AA7075-O SHEETS. Ponencia en Congreso. THE 14TH INTERNATIONAL CONFERENCE ON METAL FORMING. CRACOVIA, POLONIA. 2012
Martínez-Donaire, Andrés Jesús;Vallellano-Martin, Carpoforo;Morales-Palma, Domingo;Garcia-Lomas-Jung, Francisco Javier:
Experimental and numerical analysis of the failure of AA7075-O stretch-bend sheets. Ponencia en Congreso. THE 14TH INTERNATIONAL CONFERENCE ON METAL FORMING. CRACOVIA, POLONIA. 2012
Vallellano-Martin, Carpoforo;G. Centeno;Martínez-Donaire, Andrés Jesús;Doblas-Charneco, Francisco Javier;Estevez-Urra, Aida;Garcia-Lomas-Jung, Francisco Javier:
Experiencia docente en procesos de conformado plástico mediante casos prácticos. Poster en Congreso. XX Congreso Universitario de Innovación Educativa en las Enseñanzas Técnicas. LAS PALMAS DE GRAN CANARIA, ESPAÑA. 2012
G. Centeno;Vallellano-Martin, Carpoforo;Doblas-Charneco, Francisco Javier;Martínez-Donaire, Andrés Jesús;Estévez, Antonio;Garcia-Lomas-Jung, Francisco Javier:
Self-evaluation e-learning system for manufacturing engineering subjects. Comunicación en congreso. 3rd Especial Symposium on New Frontiers in Manufacturing Engineering and Materials Processing Training and Learning. Las Palmas de Gran Canaria. 2012
G. Centeno;Vallellano-Martin, Carpoforo;Doblas-Charneco, Francisco Javier;Martínez-Donaire, Andrés Jesús;Estevez-Urra, Aida;Garcia-Lomas-Jung, Francisco Javier:
Sistema de autoevaluación continua en la asignatura Tecnología de Fabricación. Ponencia en Congreso. XX Congreso Universitario de Innovación Educativa en las Enseñanzas Técnicas. Las Palmas de Gran Canaria (España). 2012
Martínez-Donaire, Andrés Jesús;Vallellano-Martin, Carpoforo;G. Centeno;Morales-Palma, Domingo;Doblas-Charneco, Francisco Javier;Garcia-Lomas-Jung, Francisco Javier:
TIME-DEPENDENT METHODOLOGY FOR THE EXPERIMENTAL EVALUATION OF THE ONSET OF NECKING UNDER THROUGH THICKNESS STRAIN GRADIENTS. Ponencia en Congreso. Forming Technology Forum 12. ZURICH, SUIZA. 2012
G. Centeno;Vázquez-Valeo, Jesús;Morales-Palma, Domingo;Martínez-Donaire, Andrés Jesús;Garcia-Lomas-Jung, Francisco Javier;Vallellano-Martin, Carpoforo:
Numerical analysis of the deformation mechanisms in incremental forming of aa2024-t3 sheets. Ponencia en Congreso. 4th Manufacturing Engineering Society Internacional Conference (2011). - CÁDIZ, ESPAÑA. 2011
G. Centeno;Vallellano-Martin, Carpoforo;Doblas-Charneco, Francisco Javier;Martínez-Donaire, Andrés Jesús;Garcia-Lomas-Jung, Francisco Javier:
ANÁLISIS DE UNA METODOLOGÍA DE AUTOEVALUACIÓN ONLINE PARA ASIGNATURAS TÉCNICAS EN ESTUDIOS UNIVERSITARIOS DE INGENIERÍA. Comunicación en congreso. CONGRESO INTERNACIONAL DE DOCENCIA UNIVERSITARIA (2) (2.2011.VIGO, ESPAÑA). VIGO, ESPAÑA. 2011
Martínez-Donaire, Andrés Jesús;Vallellano-Martin, Carpoforo;Morales-Palma, Domingo;Garcia-Lomas-Jung, Francisco Javier:
EXPERIMENTAL DETECTION OF NECKING IN STRETCH-BENDING CONDITIONS: A CRITICAL REVIEW AND NEW METHODOLOGY. Ponencia en Congreso. METAL FORMING (13) (13.2010.TOYOHASHI, JAPÓN). TOYOHASHI, JAPÓN. 2010
Vallellano-Martin, Carpoforo;Morales-Palma, Domingo;Martínez-Donaire, Andrés Jesús;Garcia-Lomas-Jung, Francisco Javier:
ON THE USE OF CONCAVE-SIDE RULE AND CRITICAL-DISTANCE METHODS TO PREDICT THE INFLUENCE OF BENDING ON SHEET-METAL FORMABILITY. Comunicación en congreso. THE 13TH INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (ESAFORM 2010) () (.2010.BRESCIA, ITALIA). BRESCIA, ITALIA. 2010
Morales-Palma, Domingo;Vallellano-Martin, Carpoforo;Martínez-Donaire, Andrés Jesús;Garcia-Lomas-Jung, Francisco Javier:
PREDICTION OF FORMING LIMIT STRAINS IN METAL SHEETS UNDER STRETCH-BENDING CONDITIONS. Ponencia en Congreso. METAL FORMING (13) (13.2010.TOYOHASHI, JAPÓN). TOYOHASHI, JAPÓN. 2010
Morales-Palma, Domingo;Martínez-Donaire, Andrés Jesús;Vallellano-Martin, Carpoforo;Garcia-Lomas-Jung, Francisco Javier:
BENDING EFFECT IN THE FAILURE OF STRETCH-BEND METAL SHEETS. Ponencia en Congreso. INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (12) (12.2009.ENSCHEDE (HOLANDA)). ENSCHEDE (HOLANDA). 2009
Martínez-Donaire, Andrés Jesús;Vallellano-Martin, Carpoforo;Morales-Palma, Domingo;Garcia-Lomas-Jung, Francisco Javier:
EXPERIMENTAL DETECTION OF THE ONSET OF NECKING IN STRETCH-BENDING. Ponencia en Congreso. THIRD MANUFACTURING ENGINEERING SOCIETY INTERNATIONAL CONFERENCE (MESIC09) (3) (3.2009.ALCOY, SPAIN). ALCOY, SPAIN. 2009

Artículos publicados

Morales-Palma, Domingo;Borrego, Marcos;López-fernández, Jo¿e Andrés;Martínez-Donaire, Andrés Jesús;G. Centeno;Vallellano-Martin, Carpoforo:
Numerical analysis of necking in stretch-bending based on modified maximum force criteria. IOP Conference Series: Materials Science and Engineering. 2021. Vol: 1193. Núm: 012081. 10.1088/1757-899X/1193/1/012081.
Flores, G.;Palomo, David;Martínez-Donaire, Andrés Jesús;Borrego, Marcos;López-fernández, José Andrés;Morales-Palma, Domingo;G. Centeno;Vallellano-Martin, Carpoforo:
Design for FDM of flexible tooling for manufacturing aeronautical components by incremental sheet forming. IOP Conference Series: Materials Science and Engineering. 2021. Vol: 1193. Núm: 012042. 10.1088/1757-899X/1193/1/012042.
López-fernández, José Andrés;G. Centeno;Martínez-Donaire, Andrés Jesús;Morales-Palma, Domingo;Vallellano-Martin, Carpoforo:
Stretch-flanging of AA2024-T3 sheet by single-stage SPIF. Thin-Walled Structures. 2021. Vol: 160. Núm: 107338. 10.1016/j.tws.2020.107338.
Rosa-sainz, Ana;G. Centeno;Silva, Beatriz;López-fernandez, Jose Andrés;Martínez-Donaire, Andrés Jesús;Vallellano-Martin, Carpoforo:
On the Determination of Forming Limits in Polycarbonate Sheets. Materials. 2020. Vol: 13. Núm: 4. 10.3390/ma13040928.
Rosa-sainz, Ana;G. Centeno;Silva, M.b.;López-fernández, J.a.;Martínez-Donaire, Andrés Jesús;Vallellano-Martin, Carpoforo:
On the determination of forming limits in polycarbonate sheets. Materials. 2020. Vol: 13. Núm: 928. 10.3390/ma13040928.
Martínez-Donaire, Andrés Jesús;Morales-Palma, Domingo;Vallellano-Martin, Carpoforo:
On the use of strain path independent metrics and critical distance rule for predicting failure of AA7075-O stretch-bend sheets. Materials. 2020. Vol: 13. Núm: 3660. 10.3390/ma13173660.
Borrego, Marcos;Morales-Palma, Domingo;Martínez-Donaire, Andrés Jesús;G. Centeno;Vallellano-Martin, Carpoforo:
Analysis of formability in conventional hole flanging of AA7075-O sheets: punch edge radius effect and limitations of the FLC. International Journal of Material Forming. 2019. 10.1007/s12289-019-01487-2.
Martínez-Donaire, Andrés Jesús;Borrego, Marcos;Morales-Palma, Domingo;G. Centeno;Vallellano-Martin, Carpoforo:
Analysis of the influence of stress triaxiality on formability of hole-flanging by single-stage SPIF. International Journal of Mechanical Sciences. 2019. Vol: 151. Pág. 76-84. 10.1016/j.ijmecsci.2018.11.006.
Martínez-palmeth, Luis H.;Martínez-Donaire, Andrés Jesús;Vallellano-Martin, Carpoforo:
Formability limits of high-strength H240LA steel sheets under stress/strain gradients. Mechanics of Materials. 2019. Vol: 132. Pág. 47-56. 10.1016/j.mechmat.2019.02.014.
Lopez-fernandez, J. A.;G. Centeno;Martínez-Donaire, Andrés Jesús;Morales-Palma, Domingo;Vallellano-Martin, Carpoforo:
Critical evaluation of the formability of AA2024-T3 sheet deformed by single-point incremental forming. Dyna. 2019. Vol: 94. Núm: 5. Pág. 523-529. http://dx.doi.org/10.6036/9141.
Morales-Palma, Domingo;Borrego, Marcos;Martínez-Donaire, Andrés Jesús;G. Centeno;Vallellano-Martin, Carpoforo:
Optimization of Hole-Flanging by Single Point Incremental Forming in Two Stages. Materials. 2018. Vol: 11. Núm: 2029. 10.3390/ma11102029.
Martínez-Donaire, Andrés Jesús;Morales-Palma, Domingo;Borrego, Marcos;G. Centeno;Vallellano-Martin, Carpoforo:
On the effect of stress state on the failure limits of hole-flanged parts formed by SPIF. Journal of Physics: Conference Series. 2018. Vol: 1063. Pág. 1-6. 10.1088/1742-6596/1063/1/012151.
G. Centeno;Martínez-Donaire, Andrés Jesús;Morales-Palma, Domingo;Vallellano-Martin, Carpoforo:
Experimental and numerical analysis of the flanging process by SPIF. Journal of Physics: Conference Series. 2018. Vol: 1063. Pág. 1-6. 10.1088/1742-6596/1063/1/012086.
Morales-Palma, Domingo;Borrego, Marcos;Martínez-Donaire, Andrés Jesús;G. Centeno;Vallellano-Martin, Carpoforo:
Numerical study on the thickness homogenization in hole-flanging by single-point incremental forming. Journal of Physics: Conference Series. 2018. Vol: 1063. Pág. 1-6. 10.1088/1742-6596/1063/1/012183.
Morales-Palma, Domingo;Martínez-Donaire, Andrés Jesús;G. Centeno;Borrego, Marcos;Vallellano-Martin, Carpoforo:
Teaching and Learning of Manufacturing Engineering through Virtualization of Processes on CNC Machines. Materials Science Forum. 2017. Vol: 903. Pág. 112-119. 10.4028/www.scientific.net/MSF.903.112.
G. Centeno;Martínez-Donaire, Andrés Jesús;Bagudanch, Isabel;Morales-Palma, Domingo;Garcia-romeu, Maria Luisa;Vallellano-Martin, Carpoforo:
Revisiting Formability and Failure of AISI304 Sheets in SPIF: Experimental Approach and Numerical Validation. Metals. 2017. Vol: 7. Núm: 12. 10.3390/met7120531.
Martínez-Donaire, Andrés Jesús;Morales-Palma, Domingo;G. Centeno;Borrego, Marcos;Vallellano-Martin, Carpoforo:
Teaching & Learning of Sheet Metal Forming Processes Using DEFORM-3D. Materials Science Forum. 2017. Vol: 903. Pág. 48-55. 10.4028/www.scientific.net/MSF.903.48.
Martínez-Donaire, Andrés Jesús;Morales-Palma, Domingo;Caballero, A;Borrego, Marcos;G. Centeno;Vallellano-Martin, Carpoforo:
Numerical explicit analysis of hole flanging by single-stage incremental forming. Procedia Manufacturing. 2017. Vol: 13. Pág. 132-138. 10.1016/j.promfg.2017.09.019.
Morales-Palma, Domingo;Martínez-Donaire, Andrés Jesús;Vallellano-Martin, Carpoforo:
On the Use of Maximum Force Criteria to Predict Localised Necking in Metal Sheets under Stretch-Bending. Metals. 2017. Vol: 7. Núm: 11. 10.3390/met7110469.
Morales-Palma, Domingo;Borrego, Marcos;Martínez-Donaire, Andrés Jesús;G. Centeno;Vallellano-Martin, Carpoforo:
Preliminary investigation on homogenization of the thickness distribution in hole-flanging by SPIF. Procedia Manufacturing. 2017. Vol: 13. Pág. 124-131. 10.1016/j.promfg.2017.09.101 .
Morales-Palma, Domingo;Martínez-Donaire, Andrés Jesús;G. Centeno;Vallellano-Martin, Carpoforo:
Teaching experience for the virtualization of machine tools and simulation of manufacturing operations. Materials Science Forum. 2016. Vol: 853. Pág. 79-84. http://dx.doi.org/10.4028/www.scientific.net/MSF.853.79.
G. Centeno;Martínez-Donaire, Andrés Jesús;Morales-Palma, Domingo;Borrego, Marcos;Vallellano-Martin, Carpoforo:
Multidisciplinary learning of manufacturing engineering through bachelor and master theses in incremental sheet forming. Materials Science Forum. 2016. Vol: 853. Pág. 58-63. http://dx.doi.org/10.4028/www.scientific.net/MSF.853.58.
Borrego, Marcos;Morales-Palma, Domingo;Martínez-Donaire, Andrés Jesús;G. Centeno;Vallellano-Martin, Carpoforo:
Experimental study of hole-flanging by single-stage incremental sheet forming. Journal of Materials Processing Technology. 2016. Vol: 237. Pág. 320-330. http://dx.doi.org/10.1016/j.jmatprotec.2016.06.026.
Borrego, Marcos;Morales-Palma, Domingo;Martínez-Donaire, Andrés Jesús;G. Centeno;Vallellano-Martin, Carpoforo:
On the Study of the Single-stage Hole-flanging Process by SPIF. Procedia Engineering. 2015. Vol: 132. Pág. 290-297. http://dx.doi.org/10.1016/j.proeng.2015.12.497.
Silva, M. Beatriz;Martínez-Donaire, Andrés Jesús;G. Centeno;Morales-Palma, Domingo;Vallellano-Martin, Carpoforo;Martins, Paulo A. F.:
Recent Approaches for the Determination of Forming Limits by Necking and Fracture in Sheet Metal Forming. Procedia Engineering. 2015. Vol: 132. Pág. 342-349. http://dx.doi.org/10.1016/j.proeng.2015.12.504.
Martínez-Donaire, Andrés Jesús;Garcia-Lomas-Jung, Francisco Javier;Vallellano-Martin, Carpoforo:
New approaches to detect the onset of localised necking in sheets under through-thickness strain gradients. Materials & Design. 2014. Vol: 57. Pág. 135-145. 10.1016/j.matdes.2014.01.012.
G. Centeno;Bagudanch, Isabel;Martínez-Donaire, Andrés Jesús;Garcia-romeu, Maria Luisa;Vallellano-Martin, Carpoforo:
Critical analysis of necking and fracture limit strains and forming forces in single-point incremental forming. Materials & Design. 2014. Vol: 63. Pág. 20-29. 10.1016/j.matdes.2014.05.066.
G. Centeno;Bagudanch, Isabel;Garcia-romeu, Maria Luisa;Martínez-Donaire, Andrés Jesús;Vallellano-Martin, Carpoforo:
Experimental Study on the Overall Spifability of AISI 304 Sheets under Different Bending Conditions. Key Engineering Materials. 2013. Vol: 554-557. Pág. 2293-2298.
Martínez-palmeth, Luis Humberto;Martínez-Donaire, Andrés Jesús;Vallellano-Martin, Carpoforo;G. Centeno;Garcia-Lomas-Jung, Francisco Javier:
Experimental Study of the Formability of H240LA Steel Sheets under Stretch-Bending Conditions. Key Engineering Materials. 2013. Vol: 549. Pág. 349-355.
Morales-Palma, Domingo;G. Centeno;Vallellano-Martin, Carpoforo;Doblas-Charneco, Francisco Javier;Martínez-Donaire, Andrés Jesús;Estevez-Urra, Aida;Garcia-Lomas-Jung, Francisco Javier:
Self-Evaluation E-Learning System for Manufacturing Engineering Subjects. Materials Science Forum. 2013. Vol: 759. Pág. 121-128. 10.4028/www.scientific.net/MSF.759.121.
Estevez-Urra, Aida;Doblas-Charneco, Francisco Javier;Vallellano-Martin, Carpoforo;Morales-Palma, Domingo;G. Centeno;Martínez-Donaire, Andrés Jesús;Garcia-Lomas-Jung, Francisco Javier:
Teaching Experience on Metal Forming Processes through Case Study Methodology. Materials Science Forum. 2013. Vol: 759. Pág. 39-46. 10.4028/www.scientific.net/MSF.759.39.
G. Centeno;Martínez-Donaire, Andrés Jesús;Vallellano-Martin, Carpoforo;Martínez-palmeth, Luis Humberto;Morales-Palma, Domingo;Suntaxi, Carlos;Garcia-Lomas-Jung, Francisco Javier:
Experimental Study on the Evaluation of Necking and Fracture Strains in Sheet Metal Forming Processes . Procedia Engineering. 2013. Vol: 63. Pág. 650-658.
Martínez-palmeth, Luis Humberto;Martínez-Donaire, Andrés Jesús;G. Centeno;Garcia-Lomas-Jung, Francisco Javier;Vallellano-Martin, Carpoforo:
Formability of Automotive H240LA Steel Sheets in Stretch-Bending Processes. Procedia Engineering. 2013. Vol: 63. Pág. 669-677.
G. Centeno;Doblas-Charneco, Francisco Javier;Martinez-palmeth, Luis H.;Martínez-Donaire, Andrés Jesús;Vallellano-Martin, Carpoforo:
FEA of the bending in the formability of metal sheets via incremental forming. Steel Research International. 2012. Vol: Metal Forming Sp. Ed.. Pág. 447-450.
G. Centeno;Vallellano-Martin, Carpoforo;Vázquez-Valeo, Jesús;Doblas-Charneco, Francisco Javier;Martínez-Donaire, Andrés Jesús;Garcia-Lomas-Jung, Francisco Javier:
Numerical Analysis of the Stress/Strain Evolution in Incremental Sheet Forming and Stretch-bending Processes. Materials Science Forum. 2012. Vol: 713. Pág. 103-108.
Morales-Palma, Domingo;Vallellano-Martin, Carpoforo;Martínez-Donaire, Andrés Jesús;G. Centeno;Garcia-Lomas-Jung, Francisco Javier:
Influence of Punch Radius on the Formability of AA7075-O Sheets. Steel Research International. 2012. Vol: Sp.Ed. Metal Forming. Pág. 247-250.
Martínez-Donaire, Andrés Jesús;Vallellano-Martin, Carpoforo;Morales-Palma, Domingo;Garcia-Lomas-Jung, Francisco Javier:
Experimental and Numerical Analysis of the Failure of AA7075-O Stretch-Bend Sheets. Steel Research International. 2012. Vol: Sp.Ed. Metal Forming 2012. Pág. 251-254.
Morales-Palma, Domingo;Vallellano-Martin, Carpoforo;Martínez-Donaire, Andrés Jesús;Garcia-Lomas-Jung, Francisco Javier:
PREDICTION OF FORMING LIMIT STRAINS IN METAL SHEETS UNDER STRETCH-BENDING CONDITIONS.. Steel Research International. 2010. Vol: 81. Núm: 9. Pág. 781-784.
Vallellano-Martin, Carpoforo;Martínez-Donaire, Andrés Jesús;Garcia-Lomas-Jung, Francisco Javier:
On the use of concave-side rule and critical-distance methods to predict the influence of bending on sheet-metal formability. International Journal of Material Forming. 2010. Vol: 3. Núm: 1. Pág. 1167-1170.
Martínez-Donaire, Andrés Jesús;Vallellano-Martin, Carpoforo;Morales-Palma, Domingo;Garcia-Lomas-Jung, Francisco Javier:
EXPERIMENTAL DETECTION OF NECKING IN STRETCH-BENDING CONDITIONS: A CRITICAL REVIEW AND NEW METHODOLOGY.. Steel Research International. 2010. Vol: 81. Núm: 9. Pág. 785-788.
Martínez-Donaire, Andrés Jesús;Vallellano-Martin, Carpoforo;Morales-Palma, Domingo;Garcia-Lomas-Jung, Francisco Javier:
On the Experimental Detection of Necking in Stretch-Bending Tests. AMERICAN INSTITUTE OF PHYSICS 978-0-7354-0722-0. 2009. Vol: 1181. Pág. 500-508. https://doi.org/10.1063/1.3273668.
Morales-Palma, Domingo;Martínez-Donaire, Andrés Jesús;Vallellano-Martin, Carpoforo;Garcia-Lomas-Jung, Francisco Javier:
BENDING EFFECT IN THE FAILURE OF STRETCH-BEND METAL SHEETS. International Journal of Material Forming. 2009. Vol: 2. Pág. 813-816.

Patentes

Martínez-Donaire, Andrés Jesús;G. Centeno;Vallellano-Martin, Carpoforo;Morales-Palma, Domingo;Beltran-calero, Juan;Gil-báez, Pedro;Cala-romero, Antonio: Arandela para Establecer Continuidad Eléctrica. Número de patente: ES 2552589 B2
Martínez-Donaire, Andrés Jesús;Vallellano-Martin, Carpoforo;Valencia-valverde, José Miguel: SEENECK - Software for Determination of the Onset of Necking and Limit Strains in Sheet Metal Forming. Número de patente: 04/2012/20550

Tesis dirigidas o codirigidas

Martínez-palmeth, Luis Humberto:
Conformabilidad de chapa de acero de alta resistencia a tracción-flexión. Tesis Doctoral. 2014