CARPOFORO VALLELLANO MARTIN

Categoría
Catedrático de Universidad

Contacto

Teléfono
Correo electrónico
Área
Ingeniería de los Procesos de Fabricación

Investigación

Grupo de investigación

INGENIERIA MECANICA (INGENIERIA MECANICA)

Proyectos y contratos de investigación

DESARROLLO DE UN SISTEMA DE CONTROL DIMENSIONAL PARA LA PRODUCCIÓN DE PIEZAS PARA LA INDUSTRIA AERONAUTICA (SN-0248/2001 - Investigador/a)
PREDICCIÓN DEL FALLO POR FRACTURA DÚCTIL EN EL CONFORMADO POR ESTIRADO DE CHAPAS DE USO AERONÁUTICO (DPI2003-01688 - Responsable)
DESARROLLO DE UN SISTEMA DE CALIBRACIÓN DE TEMPERATURA PARA HORNOS DE PROCESOS EN LA INDUSTRIA AERONÁUTICA (TI-157 - Investigador/a)
FATIGA MULTIAXIAL: COMPORTAMIENTO ELASTOPLASTICO Y VIDA (DPI2005-04077 - Investigador/a)
MEDIDA DE LAS DEFORMACIONES EN PROCESOS DE CONFORMADO DE CHAPA EN LA INDUSTRIA AERONÁUTICA (UNSE05-23-032 - Investigador/a)
ANÁLISIS DE PREDICCIÓN DEL FALLO EN EL CORFOMADO DE CHAPAS DE USO AERONÁUTICO: INFLUENCIA DE LA FLEXIÓN Y DE LA HISTORIA DE CARGA (DPI2006-06921 - Responsable)
FATIGA BAJO CARGA MULTIAXIAL DE COMPONENTES CON CONCENTRADORES DE TENSIÓN (P06-TEP-01752 - Investigador/a)
AYUDA A LA CONSOLIDACIÓN DE GRUPOS DE INVESTIGACIÓN. CONVOCATORIA 2005/TEP111 (18.28.05.29.15.2006/268 - Investigador/a)
AYUDA A LA CONSOLIDACIÓN DE GRUPOS DE INVESTIGACIÓN. CONVOCATORIA 2006/TEP111 (2006/TEP111 1828052919 - Investigador/a)
AYUDA A LA CONSOLIDACIÓN DE GRUPOS. CONVOCATORIA 2004/TEP111. 18.28.05.29.12 (2004/TEP111 18.28.05.29.12 - Investigador/a)
AYUDA A LA CONSOLIDACIÓN DE GRUPOS. CONVOCATORIA 2003/TEP111 18.28.05.29.10. (2003/TEP111 18.28.05.29.10 - Investigador/a)
AYUDA A LA CONSOLIDACIÓN DE GRUPOS DE INVESTIGACIÓN. CONVOCATORIA 2007/TEP111 (2007/TEP111 1828052922 - Investigador/a)
APLICACIÓN DE MODELOS MICROMECÁNICOS AL ANÁLISIS DE LA CONEXIÓN INICIACIÓN-PROPAGACIÓN DE GRIETAS POR FATIGA (P08-TEP-4097 - Investigador/a)
ANÁLISIS DEL EFECTO COMBINADO TRACCIÓN-FLEXIÓN EN PROCESOS DE CONFORMADO DE CHAPA METÁLICA.DPI2009-13335 (DPI2009-13335 - Responsable)
ANÁLISIS DINÁMICO DE IMPACTOS EN MECANISMOS FLEXIBLES (PB96-1366 - Investigador/a)
FORMULACIÓN DINÁMICA DE SÓLIDOS RÍGIDOS Y FLEXIBLES EN COORDENADAS ABSOLUTAS (DPI2000-0562 - Investigador/a)
ESTUDIO DEL COMPORTAMIENTO DE MICROGRIETAS POR FATIGA BAJO CONDICIONES BIAXIALES DE CARGA (DPI2001-2395 - Investigador/a)
MEDIDA DE TENSIONES MEDIANTE EXTENSOMETRÍA ÓHMICA EN COMPUERTAS TIPO BUREAU Y VÁLVULA HOWELL-BUNGER (4308/000/2 - Responsable)
SEISMIC QUALIFICATION OF THE EMERGENCY ROD CONTROL PANEL 1H12-PL-1041 (B - Investigador/a)
SEISMIC QUALIFICATION OF THE EMERGENCY ROAD ROD INSERTION PANELS 1C11-PL-0014 A/B (C - Investigador/a)
ANÁLISIS DE FALLOS EN COMPONENTES PARA LA FABRICACIÓN DE VIDRIO (A-28054849 - Investigador/a)
DISEÑO SÍSMICO DE EQUIPOS PARA LA CENTRAL NUCLEAR DE TRILLO (A-41694266 - Investigador/a)
ESTUDIO DE FATIGA TÉRMICA (ES-0854/09/2011 - Investigador/a)
ANÁLISIS DINÁMICO DEL COMPORTAMIENTO DE UN SISTEMA DE TUBERÍAS ANTE UN TRANSITORIO DE CARGA POR DESBLOQUEO DE UN CONDUCTO. (11/45 LRU - Investigador/a)
Jigless Techniques & Flexible Tooling for Assembly Applications (NEBULA+) (PI-1842/20/2018 - Responsable)
Simulación y análisis del proceso de conformado de tubos por flexión (AE-0730/2009 - Responsable)
Nébula - Nueva generación de sistemas de ensamblaje flexibles ultraligeros (Feder Innterconecta - MC2) (PI-1602/20/2016 - Responsable)
Nuevos Desarrolos Industriales de Tecnologías de Conformado de Chapa Metálica (PI-1792/20/2018 - Responsable)
Digital Manufacturing and Virtual factory in the Aeronautical Industry using 3DExperience (PI-1753/20/2017 - Investigador/a)
Nébula - Nueva generación de sistemas de ensamblaje flexibles ultraligeros (Feder Innterconecta - AIRBUS DS) (PI-1601/20/2016 - Responsable)
Digital Manufacturing and Virtual Factory in the Aeronautical Industry using 3DExperience (PI-1753/20/2017 - Investigador/a)
Desarrollo de nuevos sistemas robotizados para fabricación y mejora estructural de telescopios gigantes, ROSSILAT (PI-0437/2008 - Investigador/a)
Fatiga multiaxial: comportamiento elastoplastico y vida (DPI2005-04077 - Investigador/a)
Fatiga bajo carga multiaxial de componentes con concentradores de tensión (P06-TEP-1752 - Investigador/a)
Experimental Survey for Analysing the Influence of Assembly Process Parameters on the Fatigue Life of Blind Bolts Riveted Metal-Composite Joints (PI-0870/20/2011 - Investigador/a)
Simulación y Análisis del proceso de Conformado de tubos por flexión (Investigador/a)
Análisis Mediante el MEF de las Deflexiones por Mecanizado en Piezas Ligeras de Aluminio con Tensiones Residuales Previas (AE-0650/2007 - Responsable)
Simulación por ordenador del conformado de la aleación Ti6AI4V (ES0672/2008 - Responsable)
Medida de Deformaciones y Tensiones Mediante Extensometría Óhmica en Compuertas Bureau (Responsable)
Análisis Experimental de la Resistencia a Fatiga de Amortiguadores Tipo McPherson. (Investigador/a)
Análisis y Mejora de la Resistencia a Fretting Fatiga en los Tubos Depósitos de los Amortiguadores para el Toyota 202-776-TR (Investigador/a)
Medida de Tensiones Mediante Extensometría Óhmica en el Tablero de una Compuerta Bureau (Responsable)
Diseño de un Procedimiento para Detección de Grietas en Ejes de Pala de Aerogeneradores (Investigador/a)
Diseño y Construcción de una Instalación para Ensayo a Fatiga de Palas de Aerogeneradores (Investigador/a)
Caracterización del Fallo por Fatiga en Discos Deflectivos de Válvulas de Amortiguadores (Investigador/a)
Ayuda a la Investigación. Estancia del Solicitante en otro Centro ( - Participante)
Estancias Breves en el Extranjero para Becarios de FPU/FPI ( - Participante)
Estancias Breves en el Extranjero para Becarios de FPU/FPI ( - Participante)
Formación de Profesorado Universitario (FPU) ( - Participante)
Becario de Investigación ( - Investigador/a)
MODELADO DINAMICO MEDIANTE SOFTWARE DE SIMULACION Y ELEMENTOS FINITOS. (PI-076/09/2007 - Participante)
FITALM-Tecnología de Fabricación aditiva por capas (ALM) en aleaciones metálicas orientada a la reducción de emisiones y la sostenibilidad del Transpo (PI-1374/09/2015 - Investigador/a)
MINERVA-Manufacturing Industrial-means Emerging from validated Automation (PI-1375-09-2015 - Investigador/a)
Nébula - Nueva generación de sistemas de ensamblaje flexibles ultraligeros (Feder Innterconecta - MC2) (PI-1602/20/2016 - Responsable)
Nébula - Nueva generación de sistemas de ensamblaje flexibles ultraligeros (Feder Innterconecta - AIRBUS DS) (PI-1601/20/2016 - Responsable)
Value Chain: From IDMU to LEAN documentation for assembly (ARIADNE) (PI-1498/20/2016 - Responsable)
MINERVA - Manufacturing Industrial - Means Emerging from Validated Automation (PI-1375/2015 - Investigador/a)
FITALM - Tecnología de Fabricación Aditiva por Capas(ALM) en aleaciones metálicas orientada a la reducción de emisiones y la sostenibilidad del transp (PI-1374/2015 - Investigador/a)
Fabricación de prototipo de conjunto doble wheelset- vagón a escala reducida (ES-1299/2014 - Responsable)
Fabricación de prototipo de caja fuerte desmontable modelo AARUM (ES-1288/2014 - Responsable)
Fabricación de prototipo de wheelset de ferrocarril a escala reducida para inspección (ES-1262/2014 - Responsable)
Modelado 3D y verificación dimensional de prototipo de caja fuerte desmontable (PI-1223/2013 - Responsable)
Desarrollo de un nuevo método de realización de puntos de conexión a masa y retorno de corriente (AMASA) (PI-1212/20/2013 - Responsable)
INESPASA / DIANNA INNTERCONECTA (PI-1034/2013 - Investigador/a)
Estudio de fatiga térmica (ES-0854/2013 - Investigador/a)
Desarrollo e Investigación de Nuevas Tecnologías para la Automatización de los Procesos de Montaje Aeronáutico (PI-1035/2012 - Investigador/a)
Desarrollo e Investigación de Nuevas Tecnologías para la Automatización de los Procesos de Montaje Aeronáutico (PI-1033/2012 - Investigador/a)
Experimental Survey for Analyzing the Influence of Assembly Process Parameters on the Fatigue Life of Blind Bolts Riveted Metal-Composite Joints(MTQM- (PI-0871/2011 - Responsable)
Estudio de fatiga térmica (ES-0854/2011 - Investigador/a)
Proceso de Conformado Incremental para el Rebordeado de Chapas de Aluminio de Ductilidad Reducida y Láminas Poliméricas: Mejora de la Conformabilidad (DPI2015-64047-R - Responsable)
Análisis del Proceso de Conformado Incremental Mono-Punto de Chapa y su Aplicación al Rebordeado de Agujeros (Hole Flanging) (DPI2012-32913 - Responsable)
Nuevos Desarrollos para la Predicción de Vida a Fatiga por Fretting (P12-TEP-2632 - Investigador/a)
Modelado 3D y verificación dimensional de prototipo de caja fuerte desmontable (PI-1223/2013 - Responsable)
NUEVOS DESARROLLOS PARA LA PREDICCIÓN DE VIDA A FATIGA POR FRETTING (2-TEP-2632 - Investigador/a)
Aplicación de Modelos Micromecánicos al Análisis de la Conexión Iniciación-Propagación de Grietas por Fatiga (P08-TEP-04097 - Investigador/a)
Desarrollo e Investigación de Nuevas Tecnologías para la Automatización de los Procesos de Montaje Aeronáutico (PI-1033/2012 - Investigador/a)
Desarrollo de un nuevo método de realización de puntos de conexión a masa y retorno de corriente (AMASA) (PI-1212/20/2013 - Responsable)
Análisis del Proceso de Conformado Incremental Mono-Punto de Chapa y su Aplicación al Rebordeado de Agujeros (Hole Flanging) (DPI2012-32913 - Responsable)

Libros publicados

Vallellano-Martin, Carpoforo;Gómez-parra, A;P.-f., Mayuet;Marcos, M:
Materials Science Forum: New Frontiers in Manufacturing Engineering and Materials Processing Training and Learning II. Trans Tech Publications. 2016. 978-3-03835-785-8
Vallellano-Martin, Carpoforo:
Crecimiento de Grietas Pequeñas por Fatiga en Componentes con Concentradores de Tensión. Tesis Doctoral. Grupo: Ingeniería. Secretariado de Publicaciones de la Universidad de Sevilla. 2006. 84-689-7101-4

Capítulos en Libros

Bagudanch, Isabel;G. Centeno;Vallellano-Martin, Carpoforo;García-romeu, María Luisa:
Towards the Manufacturing of Near Net Shape Medical Prostheses in Polymeric Sheet by Incremental Sheet Forming. Pág. 1-33. Springer. Springer. 2019.
Borrego, Marcos;Vallellano-Martin, Carpoforo:
Numerical study on the thickness homogenization in hole-flanging by single-point incremental forming. Pág. 1-6. IOP Publishing. IOP Publishing. 2018.
Borrego, Marcos;Vallellano-Martin, Carpoforo:
On the effect of stress state on the failure limits of hole- flanged parts formed by SPIF. Pág. 1-6. IOP Publishing. IOP Publishing. 2018.
González-pérez-somarriba, Borja;G. Centeno;Vallellano-Martin, Carpoforo;Gonzalez-Perez, Luis Miguel:
Complications following Total TemporoMandibular Joint Prosthetic Replacement. Pág. 1-13. Open Acces eBooks. Open Acces eBooks. 2018.
Vallellano-Martin, Carpoforo:
Experimental and numerical analysis of the flanging process by SPIF. Pág. 1-6. IOP Publishing. IOP Publishing. 2018.
Morales-Palma, Domingo;Eguía-Salinas, Ignacio;Oliva, Manuel;MAS-MORATE, FERNANDO;Vallellano-Martin, Carpoforo:
Managing Maturity States in a Collaborative Platform for the iDMU of Aeronautical Assembly Lines. Pág. 667-676. Springer. Springer. 2017.
Gonzalez-Perez, Luis Miguel;González-pérez-somarriba, Borja;G. Centeno;Vallellano-Martin, Carpoforo;Egea-Guerrero, Juan Jose:
Advanced Materials and Threedimensional Computer-aided Surgical Workflow in Cranio-maxillofacial Reconstruction. Pág. 407-434. WILEY ONLINE LIBRARY. WILEY ONLINE LIBRARY. 2016.
Vallellano-Martin, Carpoforo;Silva, M.b.;Martins, P.a.f.:
Novel experimental techniques for the determination of the forming limits at necking and fracture. Pág. 1-24. Woodhead/Elsevier. Woodhead/Elsevier. 2015.
G. Centeno;Martínez-Donaire, Andrés Jesús;Morales-Palma, Domingo;Vallellano-Martin, Carpoforo;Silva, M. Beatriz;Martins, Paulo A. F.:
Novel experimental techniques for the determination of the forming limits at necking and fracture. Pág. 1-24. Woodhead/Elsevier. Woodhead/Elsevier. 2015.
Vallellano-Martin, Carpoforo;Navarro-Robles, Alfredo;Chaves, Victor:
A new proposal of effective stress and critical distance for fatigue at notches. Pág. 1-2. Sinónimo Desconocido. Sinónimo Desconocido. 2014.
Vallellano-Martin, Carpoforo;Garcia-Lomas-Jung, Francisco Javier;Morales-Palma, Domingo:
Numerical Analysis of the Deformation Mechanism in Incremental Sheet Forming vs. Stretch-Bending. Pág. 524-529. Sinónimo Desconocido. Sinónimo Desconocido. 2011.
Vallellano-Martin, Carpoforo;Morales-Palma, Domingo;Martínez-Donaire, Andrés Jesús;Garcia-Lomas-Jung, Francisco Javier;Vázquez-Valeo, Jesús:
Numerical analysis of the deformation mechanisms in incremental forming of AA2024-T3 sheets. Pág. 740-747. 2011.
Vallellano-Martin, Carpoforo;Navarro-Robles, Alfredo;Dominguez-Abascal, Jaime:
Two-parameter FCG Driving Force: Successive Blocking of the Monotonic and Cyclic Plastic Zones at Microstructural Barriers. Pág. 143-153. M. N. James, J. R. Yates, L. Susmel & F. Iacoviello. M. N. James, J. R. Yates, L. Susmel & F. Iacoviello. 2011.
Vallellano-Martin, Carpoforo;Chaves, Victor;Navarro-Robles, Alfredo:
A model for biaxial fatigue limits. Pág. 777-784. Sinónimo Desconocido. Sinónimo Desconocido. 2010.
Vallellano-Martin, Carpoforo;López, G.;Garcia-Lomas-Jung, Francisco Javier:
Optimization of Material Removal Strategy to Reduce Machining Deflections Induced by Residual Stresses in Lightweight Aeronautical Parts. Pág. 679-685. Unibertsitatea Zerbitzu Editoriala. Unibertsitatea Zerbitzu Editoriala. 2009.
Vallellano-Martin, Carpoforo;Garcia-Lomas-Jung, Francisco Javier;Morales-Palma, Domingo:
On the Experimental Detection of Necking in Stretch-Bending Tests. Pág. 500-508. AMERICAN INSTITUTE OF PHYSICS. AMERICAN INSTITUTE OF PHYSICS. 2009.
Vallellano-Martin, Carpoforo;Morales-Palma, Domingo;Garcia-Lomas-Jung, Francisco Javier:
Strain Gradient Effect in the Failure of Stretch- Bend Metal Sheets. Pág. 1-1. TMT2008. TMT2008. 2008.
Vallellano-Martin, Carpoforo;Garcia-Lomas-Jung, Francisco Javier:
On the use of integral and local criteria to predict ductile failure in biaxial-stretched aluminium sheets. Pág. 1-1. SOCIEDAD ESPAÑOLA DE INGENIERÍA DE FABRICACIÓN. SOCIEDAD ESPAÑOLA DE INGENIERÍA DE FABRICACIÓN. 2007.
Vallellano-Martin, Carpoforo;Garcia-Lomas-Jung, Francisco Javier;Linares, P.:
Generación de Trayectorias de Mecanizado y Selección de Herramientas. Aplicación de la Geometría Computacional. Pág. 1-1. Uned. Uned. 2005.
Vallellano-Martin, Carpoforo;Garcia-Lomas-Jung, Francisco Javier;Guzmán, C.:
Predicción del Fallo en el Estirado de Chapas de Aluminio 2024-T3. Pág. 1-1. Uned. Uned. 2005.
Sanchez-Fulgueira, Manuel;Vallellano-Martin, Carpoforo;Garcia-Lomas-Jung, Francisco Javier:
ANALYSIS OF CONTACT AND RESIDUAL STRESSES IN COLD FLAT ROLLING UNDER NON-HOMOGENEOUS DEFORMATION. Pág. 147-150. FACULTY OF MECHANICAL ENGINEERING. FACULTY OF MECHANICAL ENGINEERING. 2004.
Erce-Montilla, Juan José;Vallellano-Martin, Carpoforo;Garcia-Lomas-Jung, Francisco Javier:
ON THE STUDY OF DUCTILE FRACTURE CRITERIA FOR SHEET-METAL FORMING. Pág. 161-164. DOM STAMPE. DOM STAMPE. 2003.
Erce-Montilla, Juan José;Vallellano-Martin, Carpoforo;Garcia-Lomas-Jung, Francisco Javier:
ESTUDIO DE DIFERENTES CRITERIOS DE FRACTURA DÚCTIL PARA PREDECIR EL FALLO EN PROCESOS DE CONFORMADO DE CHAPA. Pág. 1193-1198. En: 2. GRÁFICA DE COIMBRA, LDA.. GRÁFICA DE COIMBRA, LDA.. 2003.
Vallellano-Martin, Carpoforo;Navarro-Robles, Alfredo;Dominguez-Abascal, Jaime:
FATIGUE CRACK GROWTH THRESHOLD CONDITIONS FOR SMALL NOTCHES. Pág. 1-8. En: CD. ELSEVIER SCIENCE. ELSEVIER SCIENCE. 2000.
Navarro-Robles, Alfredo;Vallellano-Martin, Carpoforo;De Los Rios-,E.R.:
NOTCH SENSIVITY AND SIZE EFFECTS DESCRIBED BY SHORT CRACK PROPAGATION MODEL. Pág. 63-72. Balkema. Balkema. 1999.
Vallellano-Martin, Carpoforo;Navarro-Robles, Alfredo;De Los Rios-,E.R.:
APLICATION OF MICROSTRUCTURAL FRACTURE MECHANICS TO SHOT-PEENED COMPONENTS. Pág. 145-150. En: 1. EMAS. EMAS. 1998.

Participación en congresos

Vallellano-Martin, Carpoforo:
12th CIRP Conference on Modelling of Machining Operations. - San Sebastián, Donosti. 2009

Asistencia a congresos

Borrego, Marcos;Palomo-vázquez, David;Martínez-Donaire, Andrés Jesús;López-fernández, José Andrés;Vallellano-Martin, Carpoforo:
Ductile fracture analysis in Nakazima vs. SPIF tests. Poster en Congreso. 10th Manufacturing Engineering Society International Conference. ESCUELA TECNICA SUPERIOR DE INGENIERIA DE SEVILLA. 2023
Rosa-sainz, Ana;G. Centeno;Silva, Beatriz;Vallellano-Martin, Carpoforo:
On the assessment of the failure strains in conventional and incremental forming of polymer sheets. Poster en Congreso. 10th Manufacturing Engineering Society International Conference. ESCUELA TECNICA SUPERIOR DE INGENIERIA DE SEVILLA. 2023
Suntaxi, Carlos;G. Centeno;Rosa-sainz, Ana;Morales-Palma, Domingo;Vallellano-Martin, Carpoforo:
Numerical Modelling of Conventional and Incremental Forming of Thin-Walled Tube. Ponencia en Congreso. 25th International Conference on Material Forming. BRAGA PORTUGAL. 2022
Palomo-vázquez, David;Martínez-Donaire, Andrés Jesús;López-fernández, José Andrés;Borrego, Marcos;Vallellano-Martin, Carpoforo:
Preliminary Study on the Onset of Necking Detection Using DIT in Tensile Tests. Ponencia en Congreso. 25th International Conference on Material Forming. Portugal. 2022
Arista, Rebeca;MAS-MORATE, FERNANDO;Morales-Palma, Domingo;Oliva, Manuel;Vallellano-Martin, Carpoforo:
A preliminary Ontology-based Engineering application to Industrial System reconfiguration in conceptual phase. Ponencia en Congreso. 11th International Workshop on Formal Ontologies meet Industry. Bolzano, Italy. 2021
Morales-Palma, Domingo;Borrego, Marcos;López-fernández, José Andrés;Martínez-Donaire, Andrés Jesús;G. Centeno;Vallellano-Martin, Carpoforo:
Numerical analysis of necking in stretch-bending based on modified maximum force criteria. Poster en Congreso. 9th Manufacturing Engineering Society International Conference. Gijón, Spain. 2021
Rosa-sainz, Ana;Silva, Beatriz;Lopez Fernandez, Andres;Martínez-Donaire, Andrés Jesús;Vallellano-Martin, Carpoforo:
On the Determination of the Forming Limits by Necking and Fracture of Polycarbonate Sheet. Ponencia en Congreso. Proceedings of the 13th International Conference on the Technology of Plasticity. Columbia, COLUMBUS, OHIO (EEUU). 2021
Flores, G.;Palomo, David;Martínez-Donaire, Andrés Jesús;Borrego, Marcos;López-fernández, José Andrés;Morales-Palma, Domingo;G. Centeno;Vallellano-Martin, Carpoforo:
Design for FDM of flexible tooling for manufacturing aeronautical components by incremental sheet forming. Ponencia en Congreso. 9th Manufacturing Engineering Society International Conference. Gijón, Spain. 2021
Rosa-sainz, Ana;Magrinho, Joao;Silva, Beatriz;G. Centeno;Martínez-Donaire, Andrés Jesús;Vallellano-Martin, Carpoforo:
Experimental research of formability limits in different thicknesses of polycarbonate sheets. Ponencia en Congreso. International Deep-Drawing Research Group Conference . STUGGART, ALEMANIA. 2021
Borrego, Marcos;Morales-Palma, Domingo;López-fernández, José Andrés;Martínez-Donaire, Andrés Jesús;G. Centeno;Vallellano-Martin, Carpoforo:
Revisiting flangeability in hole-flanging by single-stage incremental forming and conventional process. Ponencia en Congreso. 24th International Conference on Material Forming. Liège, Belgium. 2021
Borrego, Marcos;Morales-Palma, Domingo;López-fernández, José Andrés;Martínez-Donaire, Andrés Jesús;G. Centeno;Vallellano-Martin, Carpoforo:
Hole-flanging of AA7075-O sheets: conventional process versus SPIF. Ponencia en Congreso. The 18th International Conference on Metal Forming 2020. Krakow, Poland. 2020
Rosa-sainz, Ana;G. Centeno;Silva, Beatriz;Vaz, Fatima;Vallellano-Martin, Carpoforo:
On the assessment of formability and failure of polycarbonate sheet deformed by single point incremental forming. Poster en Congreso. Manufacturing Engenieering Society International Conference . GIJON , ESPAÑA. 2020
Arista, Rebeca;MAS-MORATE, FERNANDO;Vallellano-Martin, Carpoforo;Morales-Palma, Domingo;Oliva, Manuel:
Towards Manufacturing Ontologies for Resource Management in the Aerospace Industry. Ponencia en Congreso. 10th International Conference On Interoperability For Enterprise Systems And Applications: "Interoperability in the Era of Artificial Intelligence". Tarbes (France). 2020
Martínez-Donaire, Andrés Jesús;Morales-Palma, Domingo;Borrego, Marcos;López_fernández, José A.;G. Centeno;Vallellano-Martin, Carpoforo:
Analysis of stress triaxiality on the formability of hole-flanged parts by SPIF. Ponencia en Congreso. The 13th International Conference on Numerical Methods in Industrial Forming Processes. Portsmouth, New Hampshire, USA. 2019
Martínez-Donaire, Andrés Jesús;Martínez-palmeth, Luis H;Borrego, Marcos;Morales-Palma, Domingo;Vallellano-Martin, Carpoforo:
Analysis of the failure of H240LA steel sheets subjected to stretch-bending conditions. Comunicación en congreso. 8th Manufacturing Engineering Society International Conference. Madrid. 2019
López-fernández, José A.;G. Centeno;Borrego, Marcos;Martínez-Donaire, Andrés Jesús;Morales-Palma, Domingo;Vallellano-Martin, Carpoforo:
Numerical study of formability and failure prediction in shrink and stretch flanging by SPIF. Ponencia en Congreso. The 13th International Conference on Numerical Methods in Industrial Forming Processes. Portsmouth, New Hampshire, USA. 2019
Morales-Palma, Domingo;Borrego, Marcos;Martínez-Donaire, Andrés Jesús;G. Centeno;Vallellano-Martin, Carpoforo:
Numerical study on the thickness homogenization in hole-flanging by single-point incremental forming. Ponencia en Congreso. The 11th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes. Tokyo, Japan. 2018
Martínez-Donaire, Andrés Jesús;Borrego, Marcos;Morales-Palma, Domingo;G. Centeno;Vallellano-Martin, Carpoforo:
Hole Expansion of A High Strength Steel Sheet. Comunicación en congreso. The 11th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes. Tokyo, Japan. 2018
Morales-Palma, Domingo;MAS-MORATE, FERNANDO;Racero-Moreno, Jesús;Vallellano-Martin, Carpoforo:
A preliminary study of Models for Manufacturing (MfM) applied to Incremental Sheet Forming. Ponencia en Congreso. 15th International Conference on Product Lifecycle Management . Torino, Italy. 2018
G. Centeno;Martínez-Donaire, Andrés Jesús;Morales-Palma, Domingo;Vallellano-Martin, Carpoforo:
Experimental and numerical analysis of the flanging process by SPIF. Ponencia en Congreso. The 11th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes. Tokyo, Japan. 2018
Martínez-Donaire, Andrés Jesús;Morales-Palma, Domingo;Borrego, Marcos;G. Centeno;Vallellano-Martin, Carpoforo:
On the effect of stress state on the failure limits of hole- flanged parts formed by SPIF. Ponencia en Congreso. The 11th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes. Tokyo, Japan. 2018
Morales-Palma, Domingo;Eguía-Salinas, Ignacio;Oliva, Manuel;MAS-MORATE, FERNANDO;Vallellano-Martin, Carpoforo:
Managing maturity states in a collaborative platform for the iDMU of aeronautical assembly lines. Ponencia en Congreso. 14th International Conference on Product Lifecycle Management. Sevilla (España). 2017
Morales-Palma, Domingo;Borrego, Marcos;Martínez-Donaire, Andrés Jesús;G. Centeno;Vallellano-Martin, Carpoforo:
Preliminary investigation on homogenization of the thickness distribution in hole-flanging by SPIF. Ponencia en Congreso. 7th Manufacturing Engineering Society International Conference. Vigo (España). 2017
Martínez-Donaire, Andrés Jesús;Morales-Palma, Domingo;Borrego, Marcos;G. Centeno;Vallellano-Martin, Carpoforo:
Numerical Explicit Analysis of Hole Flanging by Single-Stage Incremental Forming. Ponencia en Congreso. 7th Manufacturing Engineering Society International Conference. Vigo (España). 2017
G. Centeno;Bagudanch, Isabel;Morales-Palma, Domingo;García-romeu, María Luisa;González-pérez-somarriba, Borja;Martínez-Donaire, Andrés Jesús;Gonzalez-Perez, Luis Miguel;Vallellano-Martin, Carpoforo:
Recent approaches for the manufacturing of polymeric cranial prostheses by incremental sheet forming. Ponencia en Congreso. 17th International Conference on Sheet Metal. Palermo (Italia). 2017
Vallellano-Martin, Carpoforo;Morales-Palma, Domingo;G. Centeno;Borrego, Marcos:
Teaching & learning of sheet metal forming processes using DEFORM-3D. Ponencia en Congreso. 24th University Educational Innovation Congress on Technical Education. Cadiz. 2016
Martínez-Donaire, Andrés Jesús;Morales-Palma, Domingo;G. Centeno;Borrego, Marcos;Vallellano-Martin, Carpoforo:
Enseñanza-Aprendizaje de Procesos de Conformado de Chapa Mediante DEFORM-3D. Ponencia en Congreso. 24 Congreso de Innovación Educativa en las Enseñanzas Técnicas (2016). Cádiz, España. 2016
Vallellano-Martin, Carpoforo;Morales-Palma, Domingo;G. Centeno;Borrego, Marcos:
Teaching and learning of manufacturing engineering through virtualization of processes on CNC machines. Ponencia en Congreso. 24th University Educational Innovation Congress on Technical Education. Cadiz. 2016
Morales-Palma, Domingo;Martínez-Donaire, Andrés Jesús;G. Centeno;Borrego, Marcos;Vallellano-Martin, Carpoforo:
Experiencia docente de simulación de procesos de fabricación en máquinas de control numérico. Comunicación en congreso. 24 Congreso de Innovación Educativa en las Enseñanzas Técnicas (2016). Cádiz, España. 2016
Navarro-Robles, Alfredo;Madrigal-Sánchez, Carmen;Vallellano-Martin, Carpoforo:
Plastic Flow Equations for the Local Strain Approach in the Multiaxial Case . Ponencia en Congreso. 11th International Conference on Multiaxial Fatigue and Fracture. Sevilla, España. 2016
G. Centeno;Martínez-Donaire, Andrés Jesús;Morales-Palma, Domingo;Borrego, Marcos;Vallellano-Martin, Carpoforo:
Multidisciplinary learning of manufacturing engineering through bachelor and master theses in incremental sheet forming. Comunicación en congreso. 22nd Symposium on New Frontiers in Materials Processing and Manufacturing Engineering Training and Learning. ALMADÉN (CIUDAD REAL). 2016
Morales-Palma, Domingo;Martínez-Donaire, Andrés Jesús;G. Centeno;Vallellano-Martin, Carpoforo:
Teaching experience for the virtualization of machine tools and simulation of manufacturing operations. Comunicación en congreso. 22nd Symposium on New Frontiers in Materials Processing and Manufacturing Engineering Training and Learning. ALMADÉN (CIUDAD REAL). 2016
G. Centeno;Morales-Palma, Domingo;Martínez-Donaire, Andrés Jesús;Borrego, Marcos;Vallellano-Martin, Carpoforo:
A numerical study of the stress/strain evolution in single-point incremental forming of AA2024-T3 sheets. Comunicación en congreso. Advances in Materials & Processing Technologies. Leganés (Madrid), España. 2015
Silva, María Beatriz;Martínez-Donaire, Andrés Jesús;G. Centeno;Vallellano-Martin, Carpoforo:
Recent Approaches for the Determination of Forming Limits by Necking and Fracture in Sheet Metal Forming. Comunicación en congreso. 6th Manufacturing Engineering Society International Conference. Barcelona (España). 2015
Silva, Maria Beatriz;Martínez-Donaire, Andrés Jesús;G. Centeno;Morales-Palma, Domingo;Vallellano-Martin, Carpoforo;Firmé-martins, Paulo Antonio:
Forming limits by necking and fracture in sheet metal forming. Comunicación en congreso. 6th Manufacturing Engineering Society International Conference. Barcelona (España). 2015
Borrego, Marcos;Morales-Palma, Domingo;Martínez-Donaire, Andrés Jesús;G. Centeno;Vallellano-Martin, Carpoforo:
On the study of the single-stage hole flanging process by SPIF. Ponencia en Congreso. 6th Manufacturing Engineering Society International Conference. Barcelona (Spain). 2015
Vallellano-Martin, Carpoforo;Dominguez-Abascal, Jaime;Portal, A.;Arroyo, P.:
Influencia en la Vida a Fatiga de la Presencia de rebaba en la Intercara en Uniones Híbridas de Aluminio¿CFRP Remachadas. Ponencia en Congreso. XXXI Encuentro del Grupo Español de Fractura. Zamora. 2015
G. Centeno;Martínez-Donaire, Andrés Jesús;Morales-Palma, Domingo;Borrego, Marcos;Vallellano-Martin, Carpoforo:
Aprendizaje Multidisciplinar de Tecnologías de Fabricación en Trabajos de Fin de Estudios en el Ámbito de los Procesos de Conformado Incremental. Ponencia en Congreso. 22 Congreso de Innovación Educativa en las Enseñanzas Técnicas. ALMADÉN (CIUDAD REAL). 2014
Morales-Palma, Domingo;Martínez-Donaire, Andrés Jesús;G. Centeno;Vallellano-Martin, Carpoforo:
Experiencia docente de fabricación en máquinas de control numérico. Ponencia en Congreso. 22 Congreso de Innovación Educativa en las Enseñanzas Técnicas. ALMADÉN (CIUDAD REAL). 2014
Vallellano-Martin, Carpoforo;Navarro-Robles, Alfredo;Chaves, Victor:
A new proposal of effective stress and critical distance for fatigue at notches. Ponencia en Congreso. FDMD II - JIP 2014 - Fatigue Design & Material Defects. PARÍS. 2014
G. Centeno;Martínez-Donaire, Andrés Jesús;Vallellano-Martin, Carpoforo;Martínez-palmeth, Luis Humberto;Morales-Palma, Domingo;Suntaxi, Carlos;Garcia-Lomas-Jung, Francisco Javier:
Experimental Study on the Evaluation of Necking and Fracture Strains in Sheet Metal Forming Processes. Ponencia en Congreso. 5th Manufacturing Engineering Society International Conference. Zaragoza, España. 2013
Bagudanch, Isabel;G. Centeno;Vallellano-Martin, Carpoforo;García-romeu, M.l.:
Forming force in Single Point Incremental Forming under different bending conditions . Comunicación en congreso. Fith Manufacturing Engineering Society International Conference. Zaragoza. 2013
Martínez-palmeth, Luis Humberto;Martínez-Donaire, Andrés Jesús;Vallellano-Martin, Carpoforo;G. Centeno;Garcia-Lomas-Jung, Francisco Javier:
Formability of Automotive H240LA Steel Sheets in Stretch Bending. Ponencia en Congreso. Manufacturing Engineering Society International Conference, 5th MESIC 2013. Zaragoza (Spain). 2013
Vallellano-Martin, Carpoforo;Aguirre, Federico;Navarro-Pintado, Carlos;Vázquez-Valeo, Jesús;Dominguez-Abascal, Jaime:
Fretting fatigue crack growth of small cracks in cylindrical contact. Ponencia en Congreso. 7th International Symposium on Fretting Fatigue. . 2013
G. Centeno;Bagudanch, Isabel;García-romeu, M. Luisa;Vallellano-Martin, Carpoforo;Martínez-Donaire, Andrés Jesús:
Experimental Study on the Overall Spifability of AISI 304 Sheets under Different Bending Conditions. Ponencia en Congreso. The 16th International Esaform Conference On Material Forming. AVEIRO (PORTUGAL). 2013
Martínez-palmeth, Luis Humberto;Martínez-Donaire, Andrés Jesús;Vallellano-Martin, Carpoforo;G. Centeno;Garcia-Lomas-Jung, Francisco Javier:
Experimental Study of the Formability of H240LA Steel Sheets Under Stretch-bending Conditions. Ponencia en Congreso. International Conference on Sheet Metal, SheMet 13. BELFAST, NORTHERN IRELAND. 2013
Vallellano-Martin, Carpoforo;Dominguez-Abascal, Jaime;Aguirre, F.:
Predicción de la Vida a Fatiga por Fretting en la Aleación de Aluminio 7075-T6 con Contacto Esférico. Ponencia en Congreso. XXX ENCUENTRO DEL GRUPO ESPAÑOL DE FRACTURA. Toledo. 2013
Morales-Palma, Domingo;Vallellano-Martin, Carpoforo;Martínez-Donaire, Andrés Jesús;G. Centeno;Garcia-Lomas-Jung, Francisco Javier:
INFLUENCE OF PUNCH RADIUS ON THE FORMABILITY OF AA7075-O SHEETS. Ponencia en Congreso. THE 14TH INTERNATIONAL CONFERENCE ON METAL FORMING. CRACOVIA, POLONIA. 2012
Martínez-Donaire, Andrés Jesús;Vallellano-Martin, Carpoforo;Morales-Palma, Domingo;Garcia-Lomas-Jung, Francisco Javier:
Experimental and numerical analysis of the failure of AA7075-O stretch-bend sheets. Ponencia en Congreso. THE 14TH INTERNATIONAL CONFERENCE ON METAL FORMING. CRACOVIA, POLONIA. 2012
Chaves, Victor;Madrigal-Sánchez, Carmen;Vallellano-Martin, Carpoforo;Navarro-Robles, Alfredo:
Crack initiation direction for in-phase biaxial fatigue loading. Ponencia en Congreso. Crack Paths (CP 2012). GAETA (ITALIA). 2012
G. Centeno;Vallellano-Martin, Carpoforo;Doblas-Charneco, Francisco Javier;Martínez-Donaire, Andrés Jesús;Estévez, Antonio;Garcia-Lomas-Jung, Francisco Javier:
Self-evaluation e-learning system for manufacturing engineering subjects. Comunicación en congreso. 3rd Especial Symposium on New Frontiers in Manufacturing Engineering and Materials Processing Training and Learning. Las Palmas de Gran Canaria. 2012
Vallellano-Martin, Carpoforo;G. Centeno;Martínez-Donaire, Andrés Jesús;Doblas-Charneco, Francisco Javier;Estevez-Urra, Aida;Garcia-Lomas-Jung, Francisco Javier:
Experiencia docente en procesos de conformado plástico mediante casos prácticos. Poster en Congreso. XX Congreso Universitario de Innovación Educativa en las Enseñanzas Técnicas. LAS PALMAS DE GRAN CANARIA, ESPAÑA. 2012
G. Centeno;Vallellano-Martin, Carpoforo;Doblas-Charneco, Francisco Javier;Martínez-Donaire, Andrés Jesús;Estevez-Urra, Aida;Garcia-Lomas-Jung, Francisco Javier:
Sistema de autoevaluación continua en la asignatura Tecnología de Fabricación. Ponencia en Congreso. XX Congreso Universitario de Innovación Educativa en las Enseñanzas Técnicas. Las Palmas de Gran Canaria (España). 2012
Martínez-Donaire, Andrés Jesús;Vallellano-Martin, Carpoforo;G. Centeno;Morales-Palma, Domingo;Doblas-Charneco, Francisco Javier;Garcia-Lomas-Jung, Francisco Javier:
TIME-DEPENDENT METHODOLOGY FOR THE EXPERIMENTAL EVALUATION OF THE ONSET OF NECKING UNDER THROUGH THICKNESS STRAIN GRADIENTS. Ponencia en Congreso. Forming Technology Forum 12. ZURICH, SUIZA. 2012
Vallellano-Martin, Carpoforo;Dominguez-Abascal, Jaime;Aguirre, F.:
Aplicación de un Modelo Micromecánico de Crecimiento de Grieta de Dos Umbrales a Fatiga por Fretting. Ponencia en Congreso. XXIX Encuentro del Grupo Español de Fractura. BILBAO. 2012
G. Centeno;Vázquez-Valeo, Jesús;Morales-Palma, Domingo;Martínez-Donaire, Andrés Jesús;Garcia-Lomas-Jung, Francisco Javier;Vallellano-Martin, Carpoforo:
Numerical analysis of the deformation mechanisms in incremental forming of aa2024-t3 sheets. Ponencia en Congreso. 4th Manufacturing Engineering Society Internacional Conference (2011). - CÁDIZ, ESPAÑA. 2011
Chaves, Victor;Navarro-Robles, Alfredo;Vallellano-Martin, Carpoforo:
Dirección de iniciación de grieta bajo carga multiaxial en fase. Ponencia en Congreso. XXVIII Encuentro del Grupo Español de Fractura. Gijón. 2011
Vallellano-Martin, Carpoforo;Navarro-Robles, Alfredo;Chaves, Victor:
Propuesta de Tensión efectiva y Distancia Crítica para el Análisis de Comp. Entallados a Fatiga. Ponencia en Congreso. XXVIII ENCUENTRO DEL GRUPO ESPAÑOL DE FRACTURA. GIJON. 2011
G. Centeno;Vallellano-Martin, Carpoforo;Morales-Palma, Domingo;Garcia-Lomas-Jung, Francisco Javier:
NUMERICAL ANALYSIS OF THE DEFORMATION MECHANISM IN INCREMENTAL SHEET FORMING VS. STRETCH-BENDING. Comunicación en congreso. INTERNATIONAL CONFERENCE ON TECHNOLOGY OF PLASTICITY (10) (10.2011.AACHEN, ALEMANIA). AACHEN, ALEMANIA. 2011
G. Centeno;Vallellano-Martin, Carpoforo;Doblas-Charneco, Francisco Javier;Martínez-Donaire, Andrés Jesús;Garcia-Lomas-Jung, Francisco Javier:
ANÁLISIS DE UNA METODOLOGÍA DE AUTOEVALUACIÓN ONLINE PARA ASIGNATURAS TÉCNICAS EN ESTUDIOS UNIVERSITARIOS DE INGENIERÍA. Comunicación en congreso. CONGRESO INTERNACIONAL DE DOCENCIA UNIVERSITARIA (2) (2.2011.VIGO, ESPAÑA). VIGO, ESPAÑA. 2011
Álvarez, I.;Vallellano-Martin, Carpoforo;Portal, A.;Arroyo-Perfumo, Pedro Joaquin:
Numerical Analysis of the Influence of Assembly Parameters on the Fatigue Life of MetalComposite Bolted Joint . Comunicación en congreso. MANUFACTURING ENGINEERING SOCIETY INTERNATIONAL CONFERENCE, MESIC 2011 (4) (4.2011.CÁDIZ). CÁDIZ. 2011
Vallellano-Martin, Carpoforo;Navarro-Robles, Alfredo;Dominguez-Abascal, Jaime:
TWO-PARAMETER FCG DRIVING FORCE:SUCCESSIVE BLOCKING OF THE MONOTONIC AND CYCLIC PLASTIC ZONES AT MICROSTRUCTURAL BARRIERS.. Ponencia en Congreso. FIRST IJFATIGUE & FFEMS JOINT WORKSHOP (1) (1.2011.FORNI DI SOPRA, ITALIA). FORNI DI SOPRA, ITALIA. 2011
Vallellano-Martin, Carpoforo;Morales-Palma, Domingo;Martínez-Donaire, Andrés Jesús;Garcia-Lomas-Jung, Francisco Javier:
ON THE USE OF CONCAVE-SIDE RULE AND CRITICAL-DISTANCE METHODS TO PREDICT THE INFLUENCE OF BENDING ON SHEET-METAL FORMABILITY. Comunicación en congreso. THE 13TH INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (ESAFORM 2010) () (.2010.BRESCIA, ITALIA). BRESCIA, ITALIA. 2010
Morales-Palma, Domingo;Vallellano-Martin, Carpoforo;Martínez-Donaire, Andrés Jesús;Garcia-Lomas-Jung, Francisco Javier:
PREDICTION OF FORMING LIMIT STRAINS IN METAL SHEETS UNDER STRETCH-BENDING CONDITIONS. Ponencia en Congreso. METAL FORMING (13) (13.2010.TOYOHASHI, JAPÓN). TOYOHASHI, JAPÓN. 2010
Martínez-Donaire, Andrés Jesús;Vallellano-Martin, Carpoforo;Morales-Palma, Domingo;Garcia-Lomas-Jung, Francisco Javier:
EXPERIMENTAL DETECTION OF NECKING IN STRETCH-BENDING CONDITIONS: A CRITICAL REVIEW AND NEW METHODOLOGY. Ponencia en Congreso. METAL FORMING (13) (13.2010.TOYOHASHI, JAPÓN). TOYOHASHI, JAPÓN. 2010
Navarro-Robles, Alfredo;Vallellano-Martin, Carpoforo;Chaves, Victor;Madrigal-Sánchez, Carmen:
A model for biaxial fatigue limits. Ponencia en Congreso. 9TH INTERNATIONAL CONFERENCE ON MULTIAXIAL FATIGUE AND FRACTURE (ICMFF9) (9) (9.2010.PARMA, ITALIA). PARMA, ITALIA. 2010
Vallellano-Martin, Carpoforo;López, G.;Garcia-Lomas-Jung, Francisco Javier:
Optimization of Material Removal Strategy to Reduce Machining Deflections Induced by Residual Stresses in Lightweight Aeronautical Parts. Comunicación en congreso. 12th CIRP Conference on Modelling of Machining Operations. - San Sebastián, Donosti. 2009
Camacho-,A.M.;Vallellano-Martin, Carpoforo;Garcia-Lomas-Jung, Francisco Javier;Sebastian-,M.A.:
INFLUENCE OF FRICTION, PUNCH DEPTH AND SHAPE FACTOR ON FORCES IN LOCALIZED-INCREMENTAL FORGING OPERATIONS.. Ponencia en Congreso. INNOVATIVE PRODUCTION MACHINES AND SYSTEMS () (.2009.CARDIFF, UK). CARDIFF, UK. 2009
Martínez-Donaire, Andrés Jesús;Vallellano-Martin, Carpoforo;Morales-Palma, Domingo;Garcia-Lomas-Jung, Francisco Javier:
EXPERIMENTAL DETECTION OF THE ONSET OF NECKING IN STRETCH-BENDING. Ponencia en Congreso. THIRD MANUFACTURING ENGINEERING SOCIETY INTERNATIONAL CONFERENCE (MESIC09) (3) (3.2009.ALCOY, SPAIN). ALCOY, SPAIN. 2009
Morales-Palma, Domingo;Martínez-Donaire, Andrés Jesús;Vallellano-Martin, Carpoforo;Garcia-Lomas-Jung, Francisco Javier:
BENDING EFFECT IN THE FAILURE OF STRETCH-BEND METAL SHEETS. Ponencia en Congreso. INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (12) (12.2009.ENSCHEDE (HOLANDA)). ENSCHEDE (HOLANDA). 2009
Vallellano-Martin, Carpoforo;Garcia-Lomas-Jung, Francisco Javier:
Detección del inicio de la estricción en procesos de estirado de chapa con flexión. Comunicación en congreso. 3rd Manufacturing Engineering Society International Conference, MESIC'09. ALCOY, ESPAÑA. 2009
Dominguez-Abascal, Jaime;Navarro-Pintado, Carlos;Vallellano-Martin, Carpoforo:
Consideración del crecimiento de grietas microestructuralmente pequeñas en la predicción de la vida a fatiga. Comunicación en congreso. XI Congreso Nacional de Propiedades Mecáncias de Sólidos. El Bosque, Cádiz. 2008
Vallellano-Martin, Carpoforo;Vázquez-Valeo, Jesús;Navarro-Robles, Alfredo;Dominguez-Abascal, Jaime:
Modelo micromecánico de crecimiento de grietas pequeñas por fatiga: una aproximación basada en dos condiciones umbrales. Ponencia en Congreso. XXV Encuentro del Grupo Español de Fractura. Sigüenza, Guadalajara, España. 2008
Vallellano-Martin, Carpoforo;Morales-Palma, Domingo;Garcia-Lomas-Jung, Francisco Javier:
ON THE STUDY OF THE EFFECT OF BENDING IN THE FORMABILITY OF METAL SHEETS. Comunicación en congreso. INTERNATIONAL CONFERENCE AND WORKSHOP ON NUMERICAL SIMULATION OF 3D SHEET METAL FORMING PROCESSES (NUMISHEET) (7) (7.2008.INTERLAKEN, SWITZERLAND). INTERLAKEN, SWITZERLAND. 2008
Morales-Palma, Domingo;Vallellano-Martin, Carpoforo;Garcia-Lomas-Jung, Francisco Javier:
STRAIN GRADIENT EFFECT IN THE FAILURE OF STRETCH-BEND METAL SHEETS. Comunicación en congreso. INTERNATIONAL RESEARCH/EXPERT CONFERENCE ¿TRENDS IN THE DEVELOPMENT OF MACHINERY AND ASSOCIATED TECHNOLOGY¿, TMT 2008 (12) (12.2008.ISTAMBUL (TURKEY)). ISTAMBUL (TURKEY). 2008
Navarro-Robles, Alfredo;Vallellano-Martin, Carpoforo:
MODELO MICROMECÁNICO PARA EL LÍMITE FATIGA BAJO CARGA BIAXIAL. Comunicación en congreso. XXIV ENCUENTRO DEL GRUPO ESPAÑOL DE FRACTURA () (.2007.BURGOS, ESPAÑA). BURGOS, ESPAÑA. 2007
Vallellano-Martin, Carpoforo;Guzmán-Mate,Clara;Garcia-Lomas-Jung, Francisco Javier:
PREDICTION OF DUCTILE FAILURE IN THE STRETCH-FORMING OF AA2024 SHEETS. Ponencia en Congreso. 9TH INTERNATIONAL CONFERENCE ON NUMERICAL METHODS IN INDUSTRIAL FORMING PROCESSES (NUMIFORM 07) (9) (9.2007.OPORTO, PORTUGAL). . 2007
Vallellano-Martin, Carpoforo;Garcia-Lomas-Jung, Francisco Javier:
Experimental and Numerical Analysis of Ductile Failure of Biaxially Stretched Sheets of 2024-T3. Comunicación en congreso. INTERNATIONAL CONFERENCE ON ADVANCED COMPUTATIONAL ENGINEERING AND EXPERIMENTING (ACE-X). (1) (1.2007.ALVOR, PORTUGAL.). ALVOR, PORTUGAL.. 2007
Navarro-Robles, Alfredo;Vallellano-Martin, Carpoforo;Chaves, Victor:
MODELO MICROMECÁNICO PARA EL LÍMITE DE FATIGA BAJO CARGA BIAXIAL.. Ponencia en Congreso. XXIV ENCUENTRO DEL GRUPO ESPAÑOL DE FRACTURA () (.2007.BURGOS, ESPAÑA). BURGOS, ESPAÑA. 2007
Vallellano-Martin, Carpoforo;Morales-Palma, Domingo;Garcia-Lomas-Jung, Francisco Javier:
EXPERIMENTAL AND NUMERICAL ANALYSIS OF DUCTILE FAILURE OF BIAXIALLY STRETCHED SHEETS OF AA2024-T3. Poster en Congreso. INTERNATIONAL CONFERENCE ON ADVANCED COMPUTATIONAL ENGINEERING AND EXPERIMENTING (ACE-X). (1) (1.2007.ALVOR, PORTUGAL.). ALVOR, PORTUGAL.. 2007
Vallellano-Martin, Carpoforo;Garcia-Lomas-Jung, Francisco Javier:
On the use of integral and local criteria to predict ductile failure in biaxial-stretched aluminium sheets.. Comunicación en congreso. 2nd Manufacturing Engineering Society International Conference. . 2007
Garcia-Lomas-Jung, Francisco Javier;Linares, P.;Vallellano-Martin, Carpoforo:
Generación de Trayectorias de Mecanizado ySelección de Herramientas. Aplicación de la Geometría Computacional. Comunicación en congreso. CONGRESO INTERNACIONAL DE LA SOCIEDAD DE INGENIERÍA DE FABRICACIÓN (1.2005.CALATAYUD (ZARAGOZA), ESPAÑA). CALATAYUD (ZARAGOZA), ESPAÑA. 2005
Guzmán-Mate,Clara;Vallellano-Martin, Carpoforo;Garcia-Lomas-Jung, Francisco Javier:
EXPERIMENTAL AND NUMERICAL ANALYSIS OF FAILURE IN STRETCHED A 2024-T3 SHEETS. Comunicación en congreso. 9TH INTERNATIONAL RESEARCH EXPERT CONFERENCE TRENDS IN THE DEVELOPMENT OF MACHINERY AND ASSOCIATED TECHNOLOGY, TMT 2005 (9) (9.2005.ANTALYA, TURKEY). ANTALYA, TURKEY. 2005
Guzmán-Mate,Clara;Garcia-Lomas-Jung, Francisco Javier;Vallellano-Martin, Carpoforo:
PREDICCIÓN DEL FALLO EN EL ESTIRADO DE CHAPAS DE ALUMINIO 2024-T3. Comunicación en congreso. CONGRESO INTERNACIONAL DE LA SOCIEDAD DE INGENIERÍA DE FABRICACIÓN (1.2005.CALATAYUD (ZARAGOZA), ESPAÑA). CALATAYUD (ZARAGOZA), ESPAÑA. 2005
Linares-Calleja,Pedro José;Garcia-Lomas-Jung, Francisco Javier;Vallellano-Martin, Carpoforo:
GENERACIÓN DE TRAYECTORIAS DE MECANIZADO Y SELECCIÓN ÓPTIMA DE HERRAMIENTAS. APLICACIÓN DE LA GEOMETRÍA COMPUTACIONAL.. Comunicación en congreso. CONGRESO INTERNACIONAL DE LA SOCIEDAD DE INGENIERÍA DE FABRICACIÓN (1.2005.CALATAYUD (ZARAGOZA), ESPAÑA). CALATAYUD (ZARAGOZA), ESPAÑA. 2005
Vallellano-Martin, Carpoforo;Garcia-Lomas-Jung, Francisco Javier;Navarro-Robles, Alfredo;Dominguez-Abascal, Jaime:
Transición de Grieta Pequeña a Grieta Grande en el Crecimiento de Grietas por Fatiga: Influencia de la Microestructura. Ponencia en Congreso. XXII ENCUENTRO DEL GRUPO ESPAÑOL DE FRACTURA (22) (22.2005.ALMAGRO, CIUDAD REAL). . 2005
Vallellano-Martin, Carpoforo;Garcia-Lomas-Jung, Francisco Javier;Cabanillas, P.a.:
Evolución de Tensiones y Deformaciones en el Aplanado de Cables por Laminación. Ponencia en Congreso. XVI Congreso Nacional de Ingeniería Mecánica. LEÓN, ESPAÑA. 2004
Navarro-Pintado, Carlos;Vallellano-Martin, Carpoforo;Dominguez-Abascal, Jaime:
ESTIMATION OF LIFE IN FRETTING FATIGUE WITH CYLINDRICAL CONTACT. Comunicación en congreso. 7TH INTERNATIONAL CONFERENCE ON BIAXIAL AND MULTIAXIAL FATIGUE & FRACTURE (7) (7.2004.BERLÍN, ALEMANIA). BERLÍN, ALEMANIA. 2004
Vallellano-Martin, Carpoforo;Navarro-Robles, Alfredo;Dominguez-Abascal, Jaime;Mariscal, M.:
Fatiga en Entallas Paqueñas. Ponencia en Congreso. XXI Encuentro del Grupo Español de Fractura. PUNTA UMBRÍA - HUELVA. 2004
Vallellano-Martin, Carpoforo;Navarro-Robles, Alfredo;Dominguez-Abascal, Jaime:
Predicción del Límite de Fatiga en Fretting con Contacto Esférico. Ponencia en Congreso. XX Encuentro del Grupo Español de Fractura. BENICASSIM (CASTELLON). 2003
Erce-Montilla, Juan José;Vallellano-Martin, Carpoforo;Garcia-Lomas-Jung, Francisco Javier:
ON THE STUDY OF DUCTILE FRACTURE CRITERIA FOR SHEET-METAL FORMING. Comunicación en congreso. INT. RESEARCH/EXPERT CONFERENCE ON TRENDS IN THE DEVELOPMENT OF MACHINERY AND ASSOCIATED TECHNOLOGY (7.2003.BARCELONA). . 2003
Navarro-Robles, Alfredo;Giraldez-,J.M.;Vallellano-Martin, Carpoforo:
A CONSTITUTIVE MODEL FOR ELASTOPLASTIC DEFORMATION UNDER VARIABLE AMPLITUDE MULTIAXIAL CYCLIC LOADING. Comunicación en congreso. CUMULATIVE FATIGUE DAMAGE CONFERENCE (.2003.SEVILLA, ESPAÑA). Santander (ESPAÑA). 2003
Erce-Montilla, Juan José;Vallellano-Martin, Carpoforo;Garcia-Lomas-Jung, Francisco Javier:
ESTUDIO DE DIFERENTES CRITERIOS DE FRACTURA DÚCTIL PARA PREDECIR EL FALLO EN PROCESOS DE CONFORMADO DE CHAPA. Comunicación en congreso. CONGRESO IBEROAMERICANO DE ENGENHARIA MECANICA (6.2003.COIMBRA (PORTUGAL)). COIMBRA (PORTUGAL). 2003
Vallellano-Martin, Carpoforo;Garcia-Lomas-Jung, Francisco Javier;Dominguez-Abascal, Jaime;Navarro-Robles, Alfredo:
Estimación del Límite de Fatiga bajo Condiciones de Fretting. Ponencia en Congreso. XIX Encuentro del Grupo Español de Fractura. Gerona. 2002
Vallellano-Martin, Carpoforo;Garcia-Lomas-Jung, Francisco Javier;Ortíz-Vargas-Machuca,Ramón Arturo:
ANÁLISIS NUMÉRICO DE LA LAMINACIÓN PLANA EN FRÍO DEL ALUMINIO AA 3004. Comunicación en congreso. CONGRESO NACIONAL DE INGENIERIA MECANICA (15.2002.CÁDIZ, ESPAÑA). CÁDIZ, ESPAÑA. 2002
Vallellano-Martin, Carpoforo;Navarro-Robles, Alfredo;Dominguez-Abascal, Jaime:
FATIGUE CRACK GROWTH THRESHOLD CONDITIONS FOR SMALL NOTCHES. Comunicación en congreso. THE 13TH EUROPEAN CONFERENCE ON FRACTURE (13.2000.SAN SEBASTIAN, ESPAÑA). SAN SEBASTIAN, ESPAÑA. 2000
Vallellano-Martin, Carpoforo;Navarro-Robles, Alfredo:
Una Aproximación Microestructural al Estudio de la Fatiga en Entallas con Tto. de Granallado. Ponencia en Congreso. ENCUENTRO DEL GRUPO ESPAÑOL DE FRACTURA (16.1999.TORREMOLINOS, MÁLAGA). TORREMOLINOS, MÁLAGA. 1999
Vallellano-Martin, Carpoforo;Dominguez-Abascal, Jaime;Navarro-Robles, Alfredo:
Condiciones Umbrales de Crecimiento de Grietas Pequeñas por Fatiga en Entallas. Parte I: Theory. Ponencia en Congreso. XVI ENCUENTRO DEL GRUPO ESPAÑOL DE FRACTURA () (.1999.MALAGA). MALAGA. 1999
Vallellano-Martin, Carpoforo;Navarro-Robles, Alfredo;Dominguez-Abascal, Jaime:
Condiciones Umbrales de Crecimiento de Grietas Pequeñas por Fatiga en Entallas. Parte II: Generalización y Aplicación a Resultados Experimentales. Ponencia en Congreso. ENCUENTRO DEL GRUPO ESPAÑOL DE FRACTURA (16.1999.TORREMOLINOS, MÁLAGA). TORREMOLINOS, MÁLAGA. 1999
Vallellano-Martin, Carpoforo;Navarro-Robles, Alfredo;De Los Rios-,E.R.:
APPLICATION OF MICROSTRUCTURAL FRACTURE MECHANICS TO SHOT-PEENED COMPONENTS. Comunicación en congreso. BIENNIEL CONFERENCE ON FRACTURE (12.1998.SHEFFIELD, REINO UNIDO). SHEFFIELD, REINO UNIDO. 1998
Navarro-Robles, Alfredo;Vallellano-Martin, Carpoforo;Brown-,M.W.:
MULTIAXIAL CYCLIC PLASTICITY EQUATIONS AND KINEMATIC HARDENING RULES BASED ON THE IDEA OF DISTANCE IN STRESS SPACE. Comunicación en congreso. EUROPEAN RESEARCH CONFERENCES ON PLASTICITY OF MATERIALS (1.1998.GRANADA, ESPAÑA). . 1998
Navarro-Robles, Alfredo;Vallellano-Martin, Carpoforo;De Los Rios-,E.R.;Xin-,X.J.:
NOTCH SENSITIVITY AND SIZE EFFECTS DESCRIBED BY A SHORT CRACK PROPAGATION MODEL. Comunicación en congreso. INTERNATIONAL CONFERENCE ON FATIGUE (.1997.UNITED KINGDOM). UNITED KINGDOM. 1997
Vallellano-Martin, Carpoforo;Dominguez-Abascal, Jaime:
Ciclos de Fuerza y Tensiones en Fretting Fatiga. Ponencia en Congreso. ENCUENTRO DEL GRUPO ESPAÑOL DE FRACTURA (14.1997.RIBADESELLA). RIBADESELLA. 1997
Borrego, Marcos;G. Centeno;Vallellano-Martin, Carpoforo:
On the Study of the Single-stage Hole-Flanging Process by SPIF. Comunicación en congreso. . .
Silva, M.b. ;G. Centeno;Vallellano-Martin, Carpoforo;Martins, P.a.f.:
Forming Limits by Necking and Fracture in Sheet Metal Forming. Comunicación en congreso. . .
Vallellano-Martin, Carpoforo:
Influencia en la Vida a Fatiga de la Presencia de rebaba en la Intercara en Uniones Híbridas de Aluminio¿CFRP Remachadas. Ponencia en Congreso. . .

Artículos publicados

Rosa-sainz, Ana;Silva, Maria Beatriz;Beltrán-Custodio, Ana María;G. Centeno;Vallellano-Martin, Carpoforo:
Assessing Formability and Failure of UHMWPE Sheets through SPIF: A Case Study in Medical Applications. Polymers. 2023. Vol: 15. Pág. 3560,1-3560,21. 10.3390/polym15173560.
Rosa-sainz, Ana;Silva, Beatriz;G. Centeno;Vallellano-Martin, Carpoforo:
Assessing Formability and Failure of UHMWPE Sheets through SPIF: A Case Study in Medical Applications. Polymers. 2023. Vol: 15. Núm: 17. 10.3390/polym15173560.
Rosa-sainz, Ana;G. Centeno;Silva, Beatriz;Vallellano-Martin, Carpoforo:
Experimental Investigation of Polycarbonate Sheets Deformed by SPIF: Formability, Micro-mechanisms of Failure and Temperature Analysis. Journal of Materials Research and Technology. 2023. Vol: 25. Pág. 7546-7565. 10.1016/j.jmrt.2023.07.075.
Suntaxi, Carlos;G. Centeno;Rosa-sainz, Ana;Morales-Palma, Domingo;Vallellano-Martin, Carpoforo:
Numerical Modelling of Conventional and Incremental Forming of Thin-Walled Tube. Key Engineering Materials. 2022. Vol: 926. Pág. 768-775. 10.4028/p-dp1242.
Flores, G.;Palomo, David;Martínez-Donaire, Andrés Jesús;Borrego, Marcos;López-fernández, José Andrés;Morales-Palma, Domingo;G. Centeno;Vallellano-Martin, Carpoforo:
Design for FDM of flexible tooling for manufacturing aeronautical components by incremental sheet forming. IOP Conference Series: Materials Science and Engineering. 2021. Vol: 1193. Núm: 012042. 10.1088/1757-899X/1193/1/012042.
López-fernández, José Andrés;G. Centeno;Martínez-Donaire, Andrés Jesús;Morales-Palma, Domingo;Vallellano-Martin, Carpoforo:
Stretch-flanging of AA2024-T3 sheet by single-stage SPIF. Thin-Walled Structures. 2021. Vol: 160. Núm: 107338. 10.1016/j.tws.2020.107338.
Arista, Rebeca;MAS-MORATE, FERNANDO;Morales-Palma, Domingo;Oliva, Manuel;Vallellano-Martin, Carpoforo:
A Preliminary Ontology-Based Engineering Application to Industrial System Reconfiguration in Conceptual Phase. CEUR Workshop Proceedings. 2021. Vol: 2969.
Morales-Palma, Domingo;Borrego, Marcos;López-fernández, Jo¿e Andrés;Martínez-Donaire, Andrés Jesús;G. Centeno;Vallellano-Martin, Carpoforo:
Numerical analysis of necking in stretch-bending based on modified maximum force criteria. IOP Conference Series: Materials Science and Engineering. 2021. Vol: 1193. Núm: 012081. 10.1088/1757-899X/1193/1/012081.
Rosa-sainz, Ana;G. Centeno;Silva, Beatriz;Vallellano-Martin, Carpoforo:
Experimental failure analysis in polycarbonate sheet deformed by spif. Journal of Manufacturing Processes. 2021. Vol: 64. Núm: 1153. 10.1016/j.jmapro.2021.01.047.
Martínez-Donaire, Andrés Jesús;Morales-Palma, Domingo;Vallellano-Martin, Carpoforo:
On the use of strain path independent metrics and critical distance rule for predicting failure of AA7075-O stretch-bend sheets. Materials. 2020. Vol: 13. Núm: 3660. 10.3390/ma13173660.
Borrego, Marcos;Morales-Palma, Domingo;Vallellano-Martin, Carpoforo:
Analysis of Flangeability by Single-Stage SPIF and Press-Working in AA7075-O Sheet. Journal of Manufacturing Science and Engineering. 2020. Vol: 143. 10.1115/1.4047997.
Rosa-sainz, Ana;G. Centeno;Silva, Beatriz;López-fernandez, Jose Andrés;Martínez-Donaire, Andrés Jesús;Vallellano-Martin, Carpoforo:
On the Determination of Forming Limits in Polycarbonate Sheets. Materials. 2020. Vol: 13. Núm: 4. 10.3390/ma13040928.
Rosa-sainz, Ana;G. Centeno;Silva, M.b.;López-fernández, J.a.;Martínez-Donaire, Andrés Jesús;Vallellano-Martin, Carpoforo:
On the determination of forming limits in polycarbonate sheets. Materials. 2020. Vol: 13. Núm: 928. 10.3390/ma13040928.
Martínez-palmeth, Luis H.;Martínez-Donaire, Andrés Jesús;Vallellano-Martin, Carpoforo:
Formability limits of high-strength H240LA steel sheets under stress/strain gradients. Mechanics of Materials. 2019. Vol: 132. Pág. 47-56. 10.1016/j.mechmat.2019.02.014.
Borrego, Marcos;Morales-Palma, Domingo;Martínez-Donaire, Andrés Jesús;G. Centeno;Vallellano-Martin, Carpoforo:
Analysis of formability in conventional hole flanging of AA7075-O sheets: punch edge radius effect and limitations of the FLC. International Journal of Material Forming. 2019. 10.1007/s12289-019-01487-2.
Lopez-fernandez, J. A.;G. Centeno;Martínez-Donaire, Andrés Jesús;Morales-Palma, Domingo;Vallellano-Martin, Carpoforo:
Critical evaluation of the formability of AA2024-T3 sheet deformed by single-point incremental forming. Dyna. 2019. Vol: 94. Núm: 5. Pág. 523-529. http://dx.doi.org/10.6036/9141.
Martínez-Donaire, Andrés Jesús;Borrego, Marcos;Morales-Palma, Domingo;G. Centeno;Vallellano-Martin, Carpoforo:
Analysis of the influence of stress triaxiality on formability of hole-flanging by single-stage SPIF. International Journal of Mechanical Sciences. 2019. Vol: 151. Pág. 76-84. 10.1016/j.ijmecsci.2018.11.006.
González-pérez-somarriba, Borja;G. Centeno;Gonzalez-Perez, Luis Miguel;Vallellano-Martin, Carpoforo:
On the Analysis of the Contact Conditions in Temporomandibular Joint Prostheses. Advances in Materials Science and Engineering. 2018. Vol: 2018. Núm: 2687864. Pág. 1-10. https://doi.org/10.1155/2018/2687864.
Martínez-Donaire, Andrés Jesús;Morales-Palma, Domingo;Borrego, Marcos;G. Centeno;Vallellano-Martin, Carpoforo:
On the effect of stress state on the failure limits of hole-flanged parts formed by SPIF. Journal of Physics: Conference Series. 2018. Vol: 1063. Pág. 1-6. 10.1088/1742-6596/1063/1/012151.
G. Centeno;Martínez-Donaire, Andrés Jesús;Morales-Palma, Domingo;Vallellano-Martin, Carpoforo:
Experimental and numerical analysis of the flanging process by SPIF. Journal of Physics: Conference Series. 2018. Vol: 1063. Pág. 1-6. 10.1088/1742-6596/1063/1/012086.
Morales-Palma, Domingo;Borrego, Marcos;Martínez-Donaire, Andrés Jesús;G. Centeno;Vallellano-Martin, Carpoforo:
Optimization of Hole-Flanging by Single Point Incremental Forming in Two Stages. Materials. 2018. Vol: 11. Núm: 2029. 10.3390/ma11102029.
Morales-Palma, Domingo;Borrego, Marcos;Martínez-Donaire, Andrés Jesús;G. Centeno;Vallellano-Martin, Carpoforo:
Numerical study on the thickness homogenization in hole-flanging by single-point incremental forming. Journal of Physics: Conference Series. 2018. Vol: 1063. Pág. 1-6. 10.1088/1742-6596/1063/1/012183.
Martínez-Donaire, Andrés Jesús;Morales-Palma, Domingo;Caballero, A;Borrego, Marcos;G. Centeno;Vallellano-Martin, Carpoforo:
Numerical explicit analysis of hole flanging by single-stage incremental forming. Procedia Manufacturing. 2017. Vol: 13. Pág. 132-138. 10.1016/j.promfg.2017.09.019.
Isabel, Bagudanch;G. Centeno;Vallellano-Martin, Carpoforo;García-romeu, M.l.:
Revisiting formability and failure of polymeric sheets deformed by Single Point Incremental Forming. Polymer Degradation and Stability. 2017. Vol: 144. Pág. 366-377. 10.1016/j.polymdegradstab.2017.08.021 .
G. Centeno;Morales-Palma, Domingo;González Pérez Somarriba, B.;Bagudanch, I.;Egea Guerrero, J.j.;González Pérez, L.m.;García Romeu, M.l.;Vallellano-Martin, Carpoforo:
A Functional Methodology on the Manufacturing of Customized Polymeric Cranial Prostheses from CAT using SPIF. Rapid Prototyping Journal. 2017. Vol: 23. Núm: 4.
Morales-Palma, Domingo;Martínez-Donaire, Andrés Jesús;G. Centeno;Borrego, Marcos;Vallellano-Martin, Carpoforo:
Teaching and Learning of Manufacturing Engineering through Virtualization of Processes on CNC Machines. Materials Science Forum. 2017. Vol: 903. Pág. 112-119. 10.4028/www.scientific.net/MSF.903.112.
G. Centeno;Martínez-Donaire, Andrés Jesús;Bagudanch, Isabel;Morales-Palma, Domingo;Garcia-romeu, Maria Luisa;Vallellano-Martin, Carpoforo:
Revisiting Formability and Failure of AISI304 Sheets in SPIF: Experimental Approach and Numerical Validation. Metals. 2017. Vol: 7. Núm: 12. 10.3390/met7120531.
Morales-Palma, Domingo;Martínez-Donaire, Andrés Jesús;Vallellano-Martin, Carpoforo:
On the Use of Maximum Force Criteria to Predict Localised Necking in Metal Sheets under Stretch-Bending. Metals. 2017. Vol: 7. Núm: 11. 10.3390/met7110469.
Martínez-Donaire, Andrés Jesús;Morales-Palma, Domingo;G. Centeno;Borrego, Marcos;Vallellano-Martin, Carpoforo:
Teaching & Learning of Sheet Metal Forming Processes Using DEFORM-3D. Materials Science Forum. 2017. Vol: 903. Pág. 48-55. 10.4028/www.scientific.net/MSF.903.48.
Madrigal-Sánchez, Carmen;Navarro-Robles, Alfredo;Vallellano-Martin, Carpoforo:
Plasticity theory for the multiaxial Local Strain-Life Method. International Journal of Fatigue. 2017. Vol: 100. Pág. 575-582. https://doi.org/10.1016/j.ijfatigue.2016.11.027.
Morales-Palma, Domingo;Borrego, Marcos;Martínez-Donaire, Andrés Jesús;G. Centeno;Vallellano-Martin, Carpoforo:
Preliminary investigation on homogenization of the thickness distribution in hole-flanging by SPIF. Procedia Manufacturing. 2017. Vol: 13. Pág. 124-131. 10.1016/j.promfg.2017.09.101 .
G. Centeno;Martínez-Donaire, Andrés Jesús;Morales-Palma, Domingo;Borrego, Marcos;Vallellano-Martin, Carpoforo:
Multidisciplinary learning of manufacturing engineering through bachelor and master theses in incremental sheet forming. Materials Science Forum. 2016. Vol: 853. Pág. 58-63. http://dx.doi.org/10.4028/www.scientific.net/MSF.853.58.
Madrigal-Sánchez, Carmen;Navarro-Robles, Alfredo;Vallellano-Martin, Carpoforo:
Plastic flow equations for the local strain approach in the multiaxial case. Frattura ed Integrita Strutturale. 2016. Vol: 37. Pág. 8-14. http://dx.doi.org/10.3221/IGF-ESIS.37.02.
Borrego, Marcos;Morales-Palma, Domingo;Martínez-Donaire, Andrés Jesús;G. Centeno;Vallellano-Martin, Carpoforo:
Experimental study of hole-flanging by single-stage incremental sheet forming. Journal of Materials Processing Technology. 2016. Vol: 237. Pág. 320-330. http://dx.doi.org/10.1016/j.jmatprotec.2016.06.026.
G. Centeno;Silva, Maria Beatriz;Alves, Luis M.;Vallellano-Martin, Carpoforo;Martins, Paulo A.f.:
Towards the characterization of fracture in thin-walled tube forming. International Journal of Mechanical Sciences. 2016. Vol: 119. Pág. 12-22. 10.1016/j.ijmecsci.2016.10.001.
Morales-Palma, Domingo;Martínez-Donaire, Andrés Jesús;G. Centeno;Vallellano-Martin, Carpoforo:
Teaching experience for the virtualization of machine tools and simulation of manufacturing operations. Materials Science Forum. 2016. Vol: 853. Pág. 79-84. http://dx.doi.org/10.4028/www.scientific.net/MSF.853.79.
Gonzalez-Perez, Luis Miguel;González-pérez, Borja;G. Centeno;Vallellano-Martin, Carpoforo;Montes, J:
Evaluation of total alloplastic temporo-mandibular joint replacement with two different types of prostheses: A three-year prospective study. Medicina Oral, Patología Oral y Cirugía Bucal. 2016. Vol: 21. Núm: 6. Pág. 766-775. 10.4317/medoral.21189 .
Silva, M. Beatriz;Martínez-Donaire, Andrés Jesús;G. Centeno;Morales-Palma, Domingo;Vallellano-Martin, Carpoforo;Martins, Paulo A. F.:
Recent Approaches for the Determination of Forming Limits by Necking and Fracture in Sheet Metal Forming. Procedia Engineering. 2015. Vol: 132. Pág. 342-349. http://dx.doi.org/10.1016/j.proeng.2015.12.504.
Vallellano-Martin, Carpoforo;Dominguez-Abascal, Jaime;Portal, A.;Arroyo-Perfumo, Pedro Joaquin:
Influencia en la Vida a Fatiga de la Presencia de rebaba en la Intercara en Uniones Híbridas de Aluminio¿CFRP Remachadas. Anales de Mecánica de la Fractura. 2015. Vol: 32. Núm: 1. Pág. 412-417.
Borrego, Marcos;Morales-Palma, Domingo;Martínez-Donaire, Andrés Jesús;G. Centeno;Vallellano-Martin, Carpoforo:
On the Study of the Single-stage Hole-flanging Process by SPIF. Procedia Engineering. 2015. Vol: 132. Pág. 290-297. http://dx.doi.org/10.1016/j.proeng.2015.12.497.
G. Centeno;Bagudanch, Isabel;Martínez-Donaire, Andrés Jesús;Garcia-romeu, Maria Luisa;Vallellano-Martin, Carpoforo:
Critical analysis of necking and fracture limit strains and forming forces in single-point incremental forming. Materials & Design. 2014. Vol: 63. Pág. 20-29. 10.1016/j.matdes.2014.05.066.
Aguirre, F;Vallellano-Martin, Carpoforo;Dominguez-Abascal, Jaime:
On the application of a micromechanical small fatigue crack growth model to predict fretting fatigue life in AA7076-T6 under spherical contact. Tribology International. 2014. Vol: 76. Pág. 6-13.
Martínez-Donaire, Andrés Jesús;Garcia-Lomas-Jung, Francisco Javier;Vallellano-Martin, Carpoforo:
New approaches to detect the onset of localised necking in sheets under through-thickness strain gradients. Materials & Design. 2014. Vol: 57. Pág. 135-145. 10.1016/j.matdes.2014.01.012.
Chaves, Victor;Navarro-Robles, Alfredo;Madrigal-Sánchez, Carmen;Vallellano-Martin, Carpoforo:
Calculating crack initiation directions for in-phase biaxial fatigue loading. International Journal of Fatigue. 2014. Vol: 58. Pág. 166-171. 10.1016/j.ijfatigue.2013.03.011.
Estevez-Urra, Aida;Doblas-Charneco, Francisco Javier;Vallellano-Martin, Carpoforo;Morales-Palma, Domingo;G. Centeno;Martínez-Donaire, Andrés Jesús;Garcia-Lomas-Jung, Francisco Javier:
Teaching Experience on Metal Forming Processes through Case Study Methodology. Materials Science Forum. 2013. Vol: 759. Pág. 39-46. 10.4028/www.scientific.net/MSF.759.39.
Vallellano-Martin, Carpoforo;Navarro-Robles, Alfredo;Dominguez-Abascal, Jaime:
Two-parameter fatigue crack growth driving force: Successive blocking of the monotonic and cyclic plastic zones at microstructural barriers. International Journal of Fatigue. 2013. Vol: 46. Pág. 27-34. https://doi.org/10.1016/j.ijfatigue.2011.12.013.
Bagudanch, Isabel;G. Centeno;Vallellano-Martin, Carpoforo;García-romeu, M.l.:
Forming Force in Single Point Incremental Forming under Different Bending Conditions. Procedia Engineering. 2013. Vol: 63. Pág. 354-360. 10.1016/j.proeng.2013.08.207 .
Morales-Palma, Domingo;Vallellano-Martin, Carpoforo;Garcia-Lomas-Jung, Francisco Javier:
Assessment of the effect of the through-thickness strain/stress gradient on the formability of stretch-bend metal sheets. Materials & Design. 2013. Vol: 50. Pág. 798-809. 10.1016/j.matdes.2013.03.086.
Martínez-palmeth, Luis Humberto;Martínez-Donaire, Andrés Jesús;G. Centeno;Garcia-Lomas-Jung, Francisco Javier;Vallellano-Martin, Carpoforo:
Formability of Automotive H240LA Steel Sheets in Stretch-Bending Processes. Procedia Engineering. 2013. Vol: 63. Pág. 669-677.
Martínez-palmeth, Luis Humberto;Martínez-Donaire, Andrés Jesús;Vallellano-Martin, Carpoforo;G. Centeno;Garcia-Lomas-Jung, Francisco Javier:
Experimental Study of the Formability of H240LA Steel Sheets under Stretch-Bending Conditions. Key Engineering Materials. 2013. Vol: 549. Pág. 349-355.
Aguirre, Federico;Vallellano-Martin, Carpoforo;Dominguez-Abascal, Jaime:
Predicción de la Vida a Fatiga por Fretting en la Aleación de Aluminio 7075-T6 con Contacto Esférico. Anales de Mecánica de la Fractura. 2013. Vol: 30. Núm: 3. Pág. 375-380.
G. Centeno;Bagudanch, Isabel;Garcia-romeu, Maria Luisa;Martínez-Donaire, Andrés Jesús;Vallellano-Martin, Carpoforo:
Experimental Study on the Overall Spifability of AISI 304 Sheets under Different Bending Conditions. Key Engineering Materials. 2013. Vol: 554-557. Pág. 2293-2298.
Morales-Palma, Domingo;G. Centeno;Vallellano-Martin, Carpoforo;Doblas-Charneco, Francisco Javier;Martínez-Donaire, Andrés Jesús;Estevez-Urra, Aida;Garcia-Lomas-Jung, Francisco Javier:
Self-Evaluation E-Learning System for Manufacturing Engineering Subjects. Materials Science Forum. 2013. Vol: 759. Pág. 121-128. 10.4028/www.scientific.net/MSF.759.121.
G. Centeno;Martínez-Donaire, Andrés Jesús;Vallellano-Martin, Carpoforo;Martínez-palmeth, Luis Humberto;Morales-Palma, Domingo;Suntaxi, Carlos;Garcia-Lomas-Jung, Francisco Javier:
Experimental Study on the Evaluation of Necking and Fracture Strains in Sheet Metal Forming Processes . Procedia Engineering. 2013. Vol: 63. Pág. 650-658.
Morales-Palma, Domingo;Vallellano-Martin, Carpoforo;Martínez-Donaire, Andrés Jesús;G. Centeno;Garcia-Lomas-Jung, Francisco Javier:
Influence of Punch Radius on the Formability of AA7075-O Sheets. Steel Research International. 2012. Vol: Sp.Ed. Metal Forming. Pág. 247-250.
Aguirre, Federico;Vallellano-Martin, Carpoforo;Dominguez-Abascal, Jaime:
Aplicación de un Modelo Micromecánico de Crecimiento de Grieta de Dos Umbrales a Fatiga por Fretting. Anales de Mecánica de la Fractura. 2012. Vol: 29. Núm: 2. Pág. 375-380.
Martínez-Donaire, Andrés Jesús;Vallellano-Martin, Carpoforo;Morales-Palma, Domingo;Garcia-Lomas-Jung, Francisco Javier:
Experimental and Numerical Analysis of the Failure of AA7075-O Stretch-Bend Sheets. Steel Research International. 2012. Vol: Sp.Ed. Metal Forming 2012. Pág. 251-254.
G. Centeno;Doblas-Charneco, Francisco Javier;Martinez-palmeth, Luis H.;Martínez-Donaire, Andrés Jesús;Vallellano-Martin, Carpoforo:
FEA of the bending in the formability of metal sheets via incremental forming. Steel Research International. 2012. Vol: Metal Forming Sp. Ed.. Pág. 447-450.
G. Centeno;Silva, Maria Beatriz;Cristino, Valentino;Vallellano-Martin, Carpoforo;Martins, Paulo A.f.:
Hole-flanging by incremental sheet forming. International Journal of Machine Tools and Manufacture. 2012. Vol: 59. Pág. 46-54.
Álvarez, I.;Doblas-Charneco, Francisco Javier;Vallellano-Martin, Carpoforo;Portal, A.;Arroyo, P. J.:
FEA of the Influence of Assembly Parameters on the Fatigue Life of Metal-Composite Bolted Joints. Materials Science Forum. 2012. Vol: 713. Pág. 73-78.
G. Centeno;Silva, Beatriz;Vallellano-Martin, Carpoforo;Martins, Paulo:
Manufacturing of sheet metal flanged parts using multi-stage spif. Steel Research International. 2012. Vol: Metal Forming Sp. Ed.. Pág. 271-274.
G. Centeno;Vallellano-Martin, Carpoforo;Vázquez-Valeo, Jesús;Doblas-Charneco, Francisco Javier;Martínez-Donaire, Andrés Jesús;Garcia-Lomas-Jung, Francisco Javier:
Numerical Analysis of the Stress/Strain Evolution in Incremental Sheet Forming and Stretch-bending Processes. Materials Science Forum. 2012. Vol: 713. Pág. 103-108.
Navarro-Robles, Alfredo;Vallellano-Martin, Carpoforo;Chaves, Victor;Madrigal-Sánchez, Carmen:
A microstructural model for biaxial fatigue conditions. International Journal of Fatigue. 2011. Vol: 33. Núm: 8. Pág. 1048-1054. 10.1016/j.ijfatigue.2010.11.001.
Chaves, Victor;Navarro-Robles, Alfredo;Vallellano-Martin, Carpoforo:
Dirección de Iniciación de Grieta Baja Carga de Fatiga Biaxial en Fase. Anales de Mecánica de la Fractura. 2011. Vol: 28. Núm: 1. Pág. 359-364.
Vallellano-Martin, Carpoforo;Navarro-Robles, Alfredo;Chaves, Victor:
Propuesta de Tensión efectiva y Distancia Crítica para el Análisis de Componente Entallados a Fatiga. Anales de Mecánica de la Fractura. 2011. Vol: 28. Núm: 1. Pág. 601-606.
Martínez-Donaire, Andrés Jesús;Vallellano-Martin, Carpoforo;Morales-Palma, Domingo;Garcia-Lomas-Jung, Francisco Javier:
EXPERIMENTAL DETECTION OF NECKING IN STRETCH-BENDING CONDITIONS: A CRITICAL REVIEW AND NEW METHODOLOGY.. Steel Research International. 2010. Vol: 81. Núm: 9. Pág. 785-788.
Morales-Palma, Domingo;Vallellano-Martin, Carpoforo;Martínez-Donaire, Andrés Jesús;Garcia-Lomas-Jung, Francisco Javier:
PREDICTION OF FORMING LIMIT STRAINS IN METAL SHEETS UNDER STRETCH-BENDING CONDITIONS.. Steel Research International. 2010. Vol: 81. Núm: 9. Pág. 781-784.
Vallellano-Martin, Carpoforo;Garcia-Lomas-Jung, Francisco Javier;Camacho-,A.M.;Sebastian-,M.A.:
EFFECT OF PUNCH GEOMETRY ON STRAIN/STRESS STATE INDUCED IN WORKPIECE BY LOCALISED-INCREMENTAL FORGING OPERATIONS.. Steel Research International. 2010. Vol: 81. Núm: 9. Pág. 958-961.
Vallellano-Martin, Carpoforo;Martínez-Donaire, Andrés Jesús;Garcia-Lomas-Jung, Francisco Javier:
On the use of concave-side rule and critical-distance methods to predict the influence of bending on sheet-metal formability. International Journal of Material Forming. 2010. Vol: 3. Núm: 1. Pág. 1167-1170.
Morales-Palma, Domingo;Martínez-Donaire, Andrés Jesús;Vallellano-Martin, Carpoforo;Garcia-Lomas-Jung, Francisco Javier:
BENDING EFFECT IN THE FAILURE OF STRETCH-BEND METAL SHEETS. International Journal of Material Forming. 2009. Vol: 2. Pág. 813-816.
Vallellano-Martin, Carpoforo;Navarro-Robles, Alfredo;Dominguez-Abascal, Jaime:
FATIGUE FAILURE ASSESSMENT UNDER STRESS GRADIENTS USING SMALL CRACK FATIGUE CONCEPTS.. Engineering Failure Analysis. 2009. Vol: 16. Pág. 2646-2657.
Vallellano-Martin, Carpoforo;Vázquez-Valeo, Jesús;Navarro-Robles, Alfredo;Dominguez-Abascal, Jaime:
A micromechanical model for small fatigue crack growth: an approach based on two threshold conditions. Fatigue & Fracture of Engineering Materials & Structures. 2009. Vol: 32. Pág. 515-524.
Martínez-Donaire, Andrés Jesús;Vallellano-Martin, Carpoforo;Morales-Palma, Domingo;Garcia-Lomas-Jung, Francisco Javier:
On the Experimental Detection of Necking in Stretch-Bending Tests. AMERICAN INSTITUTE OF PHYSICS 978-0-7354-0722-0. 2009. Vol: 1181. Pág. 500-508. https://doi.org/10.1063/1.3273668.
Navarro-Robles, Alfredo;Vallellano-Martin, Carpoforo:
Retorno al BCS. Anales de Mecánica de la Fractura. 2009. Vol: 2. Núm: 26. Pág. 424-428.
Vallellano-Martin, Carpoforo;Vázquez-Valeo, Jesús;Navarro-Robles, Alfredo;Dominguez-Abascal, Jaime:
Modelo micromecánico de crecimiento de grietas pequeñas por fatiga: una aproximación basada en dos condiciones umbrales. Anales de Mecánica de la Fractura. 2008. Vol: 25. Núm: 1. Pág. 349-354.
Camacho, A.m.;Vallellano-Martin, Carpoforo;Sebastián, M.a.;Garcia-Lomas-Jung, Francisco Javier:
Análisis Mediante el MEF de los Efectos de la Geometría del Extremo del Punzón en Procesos de Forja Localizada-Incremental. Anales de Ingeniería Mecánica. 2008. Vol: 16. Pág. 279-285.
Vallellano-Martin, Carpoforo;Navarro-Robles, Alfredo;Garcia-Lomas-Jung, Francisco Javier;Dominguez-Abascal, Jaime:
ON THE ESTIMATION OF MICROSTRUCTURAL EFFECTS IN THE NEAR-THRESHOLD FATIGUE OF SMALL CRACKS. Journal of Strain Analysis for Engineering Design. 2008. Vol: 43. Núm: 5. Pág. 337-347.
Vallellano-Martin, Carpoforo;Morales-Palma, Domingo;Garcia-Lomas-Jung, Francisco Javier:
A STUDY TO PREDICT FAILURE IN BIAXIALLY STRETCHED SHEETS OF ALUMINUM ALLOY 2024-T3. Materials and Manufacturing Processes. 2008. Vol: 23. Núm: 3. Pág. 303-310.
Navarro-Robles, Alfredo;Vallellano-Martin, Carpoforo;Chaves-Repiso, Victor:
MODELO MICROMECÁNICO PARA EL LÍMITE FATIGA BAJO CARGA BIAXIAL. Anales de Mecánica de la Fractura. 2007. Vol: 2. Pág. 471-476.
Vallellano-Martin, Carpoforo;Cabanillas-,Pedro;Garcia-Lomas-Jung, Francisco Javier:
ANALYSIS OF DEFORMATIONS AND STRESSES IN FLAT ROLLING OF WIRE (ACEPTADA ABRIL 2007). Journal of Materials Processing Technology. 2007. Vol: 195. Núm: 1-3. Pág. 63-71.
Vallellano-Martin, Carpoforo;Dominguez-Abascal, Jaime;Navarro-Robles, Alfredo:
INFLUENCE OF R RATIO AND STICK ZONE ECCENTRICITY ON THE PREDICTION OF THE FRETTING FATIGUE LIMIT WITH SPHERICAL CONTACT. International Journal of Fatigue. 2007. Vol: 29. Núm: 7. Pág. 1208-1219.
Vallellano-Martin, Carpoforo;Garcia-Lomas-Jung, Francisco Javier;Guzmán-Mate,Clara:
FAILURE PREDICTION IN STRETCHED SHEETS OF ALUMINIUM 2024-T3. Materials Science Forum. 2006. Vol: 526. Pág. 91-96.
Vallellano-Martin, Carpoforo;Navarro-Robles, Alfredo;Dominguez-Abascal, Jaime;Garcia-Lomas-Jung, Francisco Javier:
TRANSICIÓN DE GRIETA PEQUEÑA A GRIETA GRANDE EN EL CRECIMIENTO DE GRIETAS POR FATIGA: INFLUENCIA DE LA MICROESTRUCTURA. Anales de Mecánica de la Fractura. 2005. Vol: 22. Pág. 359-364.
Vallellano-Martin, Carpoforo;Mariscal-,M.Rosa;Navarro-Robles, Alfredo;Dominguez-Abascal, Jaime:
A MICROMECHANICAL APPROACH TO FATIGUE IN SMALL NOTCHES. Fatigue & Fracture of Engineering Materials & Structures. 2005. Vol: 28. Núm: 11. Pág. 1035-1045.
Navarro-Robles, Alfredo;Giraldez-,J.M.;Vallellano-Martin, Carpoforo:
A CONSTITUTIVE MODEL FOR ELASTOPLASTIC DEFORMATION UNDER VARIABLE AMPLITUDE MULTIAXIAL CYCLIC LOADING. International Journal of Fatigue. 2005. Vol: 27. Núm: 8. Pág. 838-846.
Vallellano-Martin, Carpoforo;Erce-Montilla, Juan José;Garcia-Lomas-Jung, Francisco Javier:
PREDICCIÓN DEL FALLO EN EL CONFORMADO PLÁSTICO DE CHAPA MEDIANTE CRITERIOS DE FRACTURA DÚCTIL. Revista Iberoamericana de Ingeniería Mecánica. 2005. Vol: 9. Núm: 2. Pág. 101-111.
Vallellano-Martin, Carpoforo;Dominguez-Abascal, Jaime;Navarro-Robles, Alfredo:
PREDICTING THE FRETTING FATIGUE LIMIT FOR SPHERICAL CONTACT. Engineering Failure Analysis. 2004. Vol: 11. Núm: 5. Pág. 727-736.
Vallellano-Martin, Carpoforo;Garcia-Lomas-Jung, Francisco Javier;Cabanillas-,Pedro:
EVOLUCIÓN DE TENSIONES Y DEFORMACIONES EN EL APLANADO DE CABLES POR LAMINACIÓN. Anales de Ingeniería Mecánica. 2004. Vol: 4. Núm: AÑO 15. Pág. 2767-2775.
Vallellano-Martin, Carpoforo;Erce-Montilla, Juan José;Garcia-Lomas-Jung, Francisco Javier:
EMPLEO DE CRITEROS DE FRACTURA DÚCTIL PARA PREDECIR EL FALLO EN EL CONFORMADO PLÁSTICO DE CHAPAS. Metalunivers (Molins De Rei). 2004. Vol: 22. Pág. 40-45.
Vallellano-Martin, Carpoforo;Navarro-Robles, Alfredo;Dominguez-Abascal, Jaime:
FATIGA EN ENTALLAS PEQUEÑAS. Anales de Mecánica de la Fractura. 2004. Vol: 21. Pág. 161-168.
Vallellano-Martin, Carpoforo;Dominguez-Abascal, Jaime;Navarro-Robles, Alfredo:
PREDICCIÓN DEL LÍMITE DE FATIGA EN FRETTING CON CONTACTO ESFÉRICO. Anales de Mecánica de la Fractura. 2003. Vol: 20. Pág. 249-254.
Vallellano-Martin, Carpoforo;Garcia-Lomas-Jung, Francisco Javier:
EFECTOS DE LA INHOMOGENEIDAD DE LA DEFORMACIÓN EN LA LAMINACIÓN PLANA EN FRÍO DEL ALUMINIO AA3004-H19. Metalunivers (Molins De Rei). 2003. Pág. 97-102.
Vallellano-Martin, Carpoforo;Dominguez-Abascal, Jaime;Navarro-Robles, Alfredo:
ON THE ESTIMATION OF FATIGUE FAILURE UNDER FRETTING CONDITIONS USING NOTCH METHODOLOGIES. Fatigue & Fracture of Engineering Materials & Structures. 2003. Vol: 26. Núm: 5. Pág. 469-478.
Ortíz-Vargas-Machuca,Ramón Arturo;Vallellano-Martin, Carpoforo;Garcia-Lomas-Jung, Francisco Javier:
ANÁLISIS NUMÉRICO DE LA LAMINACIÓN PLANA EN FRÍO DEL ALUMINIO AA 3004. Anales de Ingeniería Mecánica. 2003. Vol: 14. Pág. 1563-1567.
Barea-Alcántara,A;Garcia-Lomas-Jung, Francisco Javier;Vallellano-Martin, Carpoforo:
EQUILIBRADO ÓPTIMO DE ROBOTS CO SISTEMAS DE MASA VARIABLE. Anales de Ingeniería Mecánica. 2003. Vol: 14. Pág. 1774-1777.
Ortíz-Vargas-Machuca,Ramón Arturo;Vallellano-Martin, Carpoforo;Garcia-Lomas-Jung, Francisco Javier:
ANÁLISIS NUMÉRICO DE LA LAMINACIÓN PLANA EN FRÍO DEL ALUMINIO AA3004. Metalunivers (Molins De Rei). 2002. Vol: 15. Pág. 71-71.
Vallellano-Martin, Carpoforo;Navarro-Robles, Alfredo;Dominguez-Abascal, Jaime:
COMPACT FORMULATION FOR MODELLING CRACKS IN INFINITE SOLIDS USING DISTRIBUTED DISLOCATIONS. Philosophical Magazine. A. Physics of Condensed Matter. Defects and Mechanical Properties. 2002. Vol: 82. Núm: 1. Pág. 81-92.
Vallellano-Martin, Carpoforo;Dominguez-Abascal, Jaime;Navarro-Robles, Alfredo;Garcia-Lomas-Jung, Francisco Javier:
ESTIMACIÓN DEL LÍMITE DE FATIGA BAJO CONDICIONES DE FRETTING. Anales de Mecánica de la Fractura. 2002. Vol: 19. Pág. 307-312.
Vallellano-Martin, Carpoforo;Navarro-Robles, Alfredo;Dominguez-Abascal, Jaime:
FATIGUE CRACK GROWTH THRESHOLD CONDITIONS AT NOTCHES. PART I: THEORY. Fatigue & Fracture of Engineering Materials & Structures. 2000. Vol: 23. Núm: 2. Pág. 113-121.
Vallellano-Martin, Carpoforo;Navarro-Robles, Alfredo;Dominguez-Abascal, Jaime:
FATIGUE CRACK GROWTH THRESHOLD CONDITIONS AT NOTCHES. II. GENERALIZATION AND APPLICATION TO EXPERIMENTAL RESULTS. Fatigue & Fracture of Engineering Materials & Structures. 2000. Vol: 23. Núm: 2. Pág. 123-128.
Vallellano-Martin, Carpoforo;Navarro-Robles, Alfredo;Dominguez-Abascal, Jaime:
CONDICIONES UMBRALES DE CRECIEMIENTO DE GRIETAS PEQUEÑAS POR FATIGA EN ENTALLAS.PARTE II.GENERALIZACIÓN Y APLICACIÓN A RESULTADOS EXPERIMENTALES. Anales de Mecánica de la Fractura. 1999. Vol: 16. Pág. 77-82.
Vallellano-Martin, Carpoforo;Navarro-Robles, Alfredo;Dominguez-Abascal, Jaime:
CONDICIONES UMBRALES DE CRECIMIENTO DE GRIETAS PEQUEÑAS POR FATIGA EN ENTALLAS.PARTE I.TEORÍA. Anales de Mecánica de la Fractura. 1999. Vol: 16. Pág. 71-76.
Vallellano-Martin, Carpoforo;Navarro-Robles, Alfredo:
UNA APROXIMACION MICROESTRUCTURAL AL ESTUDIO DE LA FATIGA EN ENTALLAS CON TRATAMIENTO DE GRANALLADO. Anales de Mecánica de la Fractura. 1999. Vol: 16. Pág. 173-178.
Dominguez-Abascal, Jaime;Vallellano-Martin, Carpoforo:
CICLOS DE FUERZAS Y TENSIONES EN FRETTING FATIGA. Anales de Mecánica de la Fractura. 1997. Vol: 14. Pág. 225-236.
Vallellano-Martin, Carpoforo;Navarro-Robles, Alfredo:
SENSIBILIDAD Y EFECTO DE TAMAÑO EN ENTALLAS. Anales de Mecánica de la Fractura. 1997. Vol: 14. Pág. 237-244.

Patentes

Martínez-Donaire, Andrés Jesús;G. Centeno;Vallellano-Martin, Carpoforo;Morales-Palma, Domingo;Beltran-calero, Juan;Gil-báez, Pedro;Cala-romero, Antonio: Arandela para Establecer Continuidad Eléctrica. Número de patente: ES 2552589 B2
Martínez-Donaire, Andrés Jesús;Vallellano-Martin, Carpoforo;Valencia-valverde, José Miguel: SEENECK - Software for Determination of the Onset of Necking and Limit Strains in Sheet Metal Forming. Número de patente: 04/2012/20550
Vallellano-Martin, Carpoforo;Valencia-valverde, José M.: SEENECK - Software for Determination of the Onset of Necking and Limit Strains in Sheet Metal Forming. Número de patente: SE-800-12

Tesis dirigidas o codirigidas

(Doctorando no grabado):
Analysis of single stage SPIF process applied to the hole flanging operation. Tesis Doctoral. 2018
Martínez-palmeth, Luis Humberto:
Conformabilidad de chapa de acero de alta resistencia a tracción-flexión. Tesis Doctoral. 2014
Martínez-Donaire, Andrés Jesús:
Análisis del efecto del gradiente de deformaciones en el conformado de chapa metálica. Tesis Doctoral. 2012
Morales-Palma, Domingo:
Análisis del efecto de la flexión en la conformabilidad de chapas metálicas. Tesis Doctoral. 2011